klaus overmeyer (34 resultados)

Paperback. Condición: Very Good. Very Good - Crisp, clean, unread book with some shelfwear/edgewear, may have a remainder mark - NICE PAPERBACK Standard-sized.

Soft cover. Condición: Very Good. David Jurca; Gauri Torgalkar Ilustrador. Architecture. This is an unmarked, and undamaged copy with a small smudge on the cover.

Condición: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

Condición: acceptable. David Jurca; Gauri Torgalkar Ilustrador. USED book in ACCEPTABLE condition. Book shows significant wear but is still a good reading copy. Cover and pages are in tact but may show creases, tears, water damage, handwriting, underlining, or highlighting. Supplemental items such as access codes and CDs not guaranteed.

Soft cover. Condición: Very Good. David Jurca; Gauri Torgalkar Ilustrador. Cleveland, OH: Cleveland Urban Design Collaborative, College of Architecture and Environmental Design, Kent State University, 2009. "Urban Infill anthology, Number 2." Softcover exhibition catalog; 82 pages : color illustrations. "Graphic design and illustrations by David Jurca and Gauri Torgalkar." Accordian-fold insert inside rear cover pocket, as issued. Condition: Very Good. No marks or writing to book. The covers have some light shelf-wear / rubbing at corners.

Condición: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

Condición: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

Paperback. Condición: Very Good. Excellent condition, minimal shelfwear. - in our rare books collection Oversized.

Condición: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

Condición: New.

Paperback. Condición: new. Paperback. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components? This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condición: New.

Condición: As New. Unread book in perfect condition.

Condición: New. 1st ed. 2022 edition NO-PA16APR2015-KAP.

Hardcover. Condición: new. Hardcover. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components? This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: Brand New. 287 pages. 9.25x6.10x0.65 inches. In Stock.

Condición: New. 1st ed. 2022 edition NO-PA16APR2015-KAP.

Taschenbuch. Condición: Neu. Neuware -Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 288 pp. Englisch.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges.

Condición: New.

Buch. Condición: Neu. Neuware -Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 288 pp. Englisch.

Buch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges.

Hardcover. Condición: Brand New. 287 pages. 9.44x6.61x0.83 inches. In Stock.

Paperback. Condición: new. Paperback. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components? This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Hardcover. Condición: new. Hardcover. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components? This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges. Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Softcover/Paperback. Condición: Gut. 235 S., m. Abb.; 15-seitige Beilage "Zusammenfassung" Berieben, mit Druck-/Kratzspuren, leichte altersgemäße Gebrauchsspuren. Allgemeiner Zustand: gut. H5 H5 //Rechnung mit ausgewiesener MwSt. liegt bei.// Sprache: Deutsch Gewicht in Gramm: 887.

Softcover/Paperback. 235 S. mit Ill. + Zusammenfassung (15 S.) / Einband etw. berieben sonst gutes Exemplar // Kulturwirtschaft , Stadtentwicklung , Raum , Nutzungsänderung , Zwischennutzung , Offspace, Wirtschaft, Landschaftsgestaltung, Raumplanung N06 9783869840857 *.* Sprache: Deutsch Gewicht in Gramm: 950.

Gebundene Ausgabe. Condición: Gut. 2. unveränderte Aufl. 384 S. Gebrauchtes Exemplar in gutem Zustand. . Eintragungen oder Markierungen im oder am Buch liegen vor. Brachen und leerstehende Bauten werden in vielen Städten schnell zu besonders lebendigen Orten: Clubs und Bars, Start-up-Unternehmen und Kunstszene, Migrantenökonomien und informelle Märkte, Freizeitnutzungen und Nachtleben siedeln sich an diesen Orten an, die die Stadtplanung und der Immobilienmarkt zunächst nicht entwickeln können. Oft finden sich gerade hier innovative Kulturproduktion und vitale Öffentlichkeit. Das Forschungsteam Urban Catalyst hat sich mehrere Jahre lang diesen ungeplanten Phänomenen in fünf europäischen Ländern gewidmet und dabei nicht nur ihre versteckte Logik analysiert. Aufbauend auf eigener Beteiligung an mehreren Projekten beschreibt Urban Catalyst Wege, wie Prozesse des Informellen in den Städtebau Eingang finden können und was Stadtplaner von Zwischennutzern lernen können. Mit Gastbeiträgen von Azra Akamija, Kees Christiaanse, Margaret Crawford, Jesko Fezer, Arnold Reijndorp, Saskia Sassen und anderen Autoren. Mit Projekten aus Amsterdam, Basel, Berlin, Halle, Leipzig, London, Rom, Wien, Zagreb und weiteren Städten. - Wir versenden aus unserem deutschen Lager heraus in plastikfreien oder wiederverwendeten Polstertaschen. Sprache: Deutsch Gewicht in Gramm: 921.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Light signals in optical waveguides can be used to transmit very large amounts of data quickly and largely without interference. In the industrial and infrastructural sectors, e.g. in the automotive and aerospace industries, the demand to further exploit this potential is therefore increasing. Which technologies can be used to effectively integrate systems that transmit data by means of light into existing components This is a central question for current research. So far, there have been some technical limitations in this regard. For example, it is difficult to couple the signal of an optical waveguide to other optical waveguides without interruption. There is also a lack of suitable fabrication technologies for three-dimensional waveguides, as well as design and simulation environments for 3D opto-MID. This book addresses these and other challenges. 288 pp. Englisch.

Kartoniert / Broschiert. Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Gives an insight into a novel printing technique for Polymer Optical WaveguidesSuited for teaching in Applied EngineeringPresents current developments in the field of optical short-range interconnectsProf. Dr.-Ing Joerg Fra.