The Use Of Cold Sprayed Alloys For Metallic Stents

Idioma: inglés

Editorial: LAP LAMBERT Academic Publishing, 2014

3848421577 / 9783848421572

  • Tapa blanda
  • Nuevo
Ver todos los detalles

Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH

Vendedor de 5 estrellas

Vendedor de IberLibro desde 14 de agosto de 2006

Tapa blanda

Condición: Nuevo

EUR 62,49

Envío por EUR 35,00 
Se envía de Alemania a Estados Unidos de America

Cantidad disponible: 1 disponible

Añadir al carrito
Devoluciones gratuitas de 30 días

Descripción del artículo del vendedor

nach der Bestellung gedruckt Neuware - Printed after ordering - 1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat treatment, the microstructure became denser (i.e. lower porosity). The microhardness did not change with 400°C annealing temperature but decreased significantly at 800°C, which can be explained by the recrystallization that occurs during cold-spraying. Both the ductility and strength were improved after annealing at 1100°C, in particular. 2- This study shows the ability to successfully cold-spray composite 316L-CoCr using nitrogen as a propellant gas with Co-Cr volume fractions (i.e. 25%, 33.3%). The deposition efficiency decreased with increasing the amount of Co-Cr. The microstructure is characterized by low porosity level in the first two mixes. At 50% as mixed Co-Cr and 316L, the actual as coated material was 33% Co-Cr, due to difficulties in bonding Co-Cr particles to each other. Thus, the porosity was high at the 50% mixture and cracks were also apparent. …

N° de ref. del artículo 9783848421572

Título
The Use Of Cold Sprayed Alloys For Metallic Stents
Autor
Bandar Almangour
Editorial
LAP LAMBERT Academic Publishing
Año de publicación
2014
Estado
Neu
Encuadernación
Taschenbuch
Idioma
inglés
ISBN 10
3848421577
ISBN 13
9783848421572
Peso del artículo
185 gramos
Dimensiones
220x150x8 mm

AHA-BUCH GmbH

Einbeck, Alemania

Vendedor de 5 estrellas

Vendedor de IberLibro desde 14 de agosto de 2006

Tarifas de envío de Alemania a Estados Unidos de America

ArtículoDe 7 a 10 días hábilesDe 5 a 7 días hábiles
Primer artículoEUR 35,00EUR 45,00
Los plazos de entrega los establecen los vendedores y varían según el transportista y la ubicación. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relación con cargos adicionales para cubrir cualquier aumento en los costes de envío de los artículos.

Métodos de pago

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Cheque
  • Giro bancario
  • PayPal

Descripción de la tienda

Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.

Especialidad

Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & Studium

Información empresarial del vendedor

AHA-BUCH GmbH

Garlebsen 48
Einbeck, Alemania 37574