T�tulo: Transient Electro-Thermal Modeling on Power Semiconductor Devices (Synthesis Lectures on Power Electronics)
Editor: Springer
Fecha de publicaci�n: 2013
Idioma: Ingl�s
ISBN 10: 3031013786
ISBN 13: 9783031013782
Encuadernaci�n: Encuadernaci�n de tapa blanda
Estado: New

Acerca de

Sinopsis

This book presents physics-based electro-thermal models of bipolar power semiconductor devices including their packages, and describes their implementation in MATLAB and Simulink. It is a continuation of our first book Modeling of Bipolar Power Semiconductor Devices. The device electrical models are developed by subdividing the devices into different regions and the operations in each region, along with the interactions at the interfaces, are analyzed using the basic semiconductor physics equations that govern device behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as junction voltages and carrier distribution in different regions of the device, can be obtained using the models. The instantaneous dissipated power, calculated using the electrical device models, serves as input to the thermal model (RC network with constant and nonconstant thermal resistance and thermal heat capacity, or Fourier thermal model) of the entire module or package, which computes the junction temperature of the device. Once an updated junction temperature is calculated, the temperature-dependent semiconductor material parameters are re-calculated and used with the device electrical model in the next time-step of the simulation. The physics-based electro-thermal models can be used for optimizing device and package design and also for validating extracted parameters of the devices. The thermal model can be used alone for monitoring the junction temperature of a power semiconductor device, and the resulting simulation results used as an indicator of the health and reliability of the semiconductor power device.

Acerca del autor

Tanya Kirilova Gachovska received a M.Eng. degree in electrical engineering specializing in Automation of Production and a Ph.D. in electrical engineering specializing in Pulsed Electric Fields(PEF) from the University of Ruse, Bulgaria, in 1995 and 2003, respectively. She worked as an assistant professor from 1999-2003 at the University of Ruse. She conducted research for two years and taught for a semester at McGill University in Montreal, Canada. She had an 18 months post-doc experience on PEF at the University of Nebraska Lincoln, USA. Tanya finished her second Ph.D. in electrical engineering specializing in Power Electronics specifically Modeling of Power Semiconductor Devices in 2012. During her studies, she has taught different courses and labs and continued a collaboration for PEF research with the University of Ruse, McGill, UNL, and two Algerians universities. She is currently at Solantro Semiconductor Inc. She is the author or co-author of more than 30 technical papers and conference presentations, and holds a world patent in PEF. Professor Hudgins is a native of West Texas. He attended Texas Tech University, in Lubbock, Texas, where he received a Ph.D. degree in electrical engineering in 1985. Dr. Hudgins served as Associate and Interim Department Chair of Electrical and Computer Engineering at the University of South Carolina prior to joining the University of Nebraska as Chair of the Electrical Engineering Department. Currently, he is Director of the Nebraska Wind Applications Center and Associate Director of the Nebraska Center for Energy Sciences Research. His research involves power electronic device characterization and modeling, power electronics design, and renewable energy systems. In 2000, he was named as an IEEE Third Millenium Medal recipient for "Outstanding Contributions in the area of Power Electronics." Dr. Hudgins is a Fellow of the IEEE and a member of the IEEE Board of Directors (Division II Director). Dr.Hudgins servedas the Presidentof the IEEE Power Electronics Society (PELS) for the years of 1997 and 1998 and as President of the IEEE Industry Applications Society (IAS) in 2003. Dr. Hudgins has published over 130 technical papers and book chapters concerning power semiconductors, power electronics, renewable energy systems, and engineering education. He has worked with numerous power semiconductor and equipment manufacturing companies. Professor Hudgins is a native of West Texas. He attended Texas Tech University, in Lubbock, Texas, where he received a Ph.D. degree in electrical engineering in 1985. Dr. Hudgins served as Associate and Interim Department Chair of Electrical and Computer Engineering at the University of South Carolina prior to joining the University of Nebraska as Chair of the Electrical Engineering Department. Currently, he is Director of the Nebraska Wind Applications Center and Associate Director of the Nebraska Center for Energy Sciences Research. His research involves power electronic devicecharacterization and modeling, power electronics design, and renewable energy systems. In 2000, he was named as an IEEE Third Millenium Medal recipient for "Outstanding Contributions in the area of Power Electronics." Dr. Hudgins is a Fellow of the IEEE and a member of the IEEE Board of Directors (Division II Director). Dr.Hudgins servedas the President of the IEEE Power Electronics Society (PELS) for the years of 1997 and 1998 and as President of the IEEE Industry Applications Society (IAS) in 2003. Dr. Hudgins has published over 130 technical papers and book chapters concerning power semiconductors, power electronics, renewable energy systems, and engineering education. He has worked with numerous power semiconductor and equipment manufacturing companies. Enrico Santi received a bachelor's degree in electrical engineering from the University of Padua, Padua, Italy, in 1988, and a Ph.D. degree from the California Institute of Technology (Caltech) in 1994. Since 1998, he has been withthe Department of Electrical Engineering of the University of South Carolina, where he is currently an Associate Professor. He has published over 100 papers on power electronics and modeling and simulation in international journals and conference proceedings. His research interests include switched-mode power converters, advanced modeling and simulation of power systems, modeling and simulation of semiconductor power devices, and control of power electronic systems. Dr. Santi was the recipient of the National Science Foundation CAREER Award in 2004 and the IEEE Industry Applications Society William M. Portnoy Paper Award in 2003, 2005, and 2006.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

I mainly carry imported books from South East Asia / South Asia for readers of all Age Groups.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

PLETOS INC
6931 51st Avenue, WOODSIDE, Woodside, NY, 11377, U.S.A.

Condiciones de venta y env�o

Condiciones de venta

We accept return for those books which are received damamged. Though we take appropriate care in packaing to avoid such situation.

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a Books Puddle, New York, New York, U.S.A., sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

Tarifas de env�o en Estados Unidos de America

Tarifas de env�o en Estados Unidos de America
Cantidad del pedido	De 12 a 19 d�as h�biles	De 12 a 14 d�as h�biles
Primer art�culo	EUR 3.49	EUR 6.11

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.