This book deals with quantifying and analyzing the risks associated with sustainable energy technology growth in electric power systems, and developing appropriate models and methodologies to mitigate the risks and improve the overall system performance. The rapid increase in the installation of renewable energy sources in electric power systems has given rise to a wide range of problems related to planning and operation of power systems to maintain quality, stability, reliability and efficiency. Additionally, there is a growing global environmental concern regarding increasing emissions from the electric power generation required to meet rising energy needs and support sustainable and inclusive development. The phenomenon of low voltage ride through (LVRT), common to wind energy systems, is discussed, and ways to tackle the same are proposed in the first chapter. Subsequent chapters propose methods of optimizing a sustainable and smart microgrid, and supplying electricity to remote areas of a developing country with no immediate possibility of national grid extension. The economic benefit and technical challenges of forming localized minigrid are also discussed. The book proposes a method for reliability assessment of a power grid with sustainable power transportation system. The issue of weak link in power system is very important as it will provide the system operators and planners to take necessary measures to strengthen the system. An approach to determine the weak parts of the system and its unreliability is proposed. With increasing installation of HVDC power transmission and development of efficient and low cost power electronic devices, the DC microgrids are becoming a common phenomenon. Their existence together with AC Grids result in Hybrid AC/DC Microgrids, which are discussed in this book. It further presents a method for reliability evaluation of a distribution system with network reconfiguration in the presence of distributed generation. The important problems in sustainable energy growth, and their potential solutions discussed and presented in the book should be of great interest to engineers, policy makers, researchers and academics in the area of electric power engineering.

“Sinopsis” puede pertenecer a otra edición de este título.

Acerca del autor

Nava Raj Karki obtained his M.Sc. (Hons) in Electrical Engineering from Belarussian National Technical University, Minsk in 1995 and Ph.D. in Electrical Engineering from Indian Institute of Technology, Bombay in 2011. He joined Department of Electrical Engineering, Institute of Engineering, Tribhuvan University in 1995 and is currently an Associate Professor and Head of the Department. He is actively involved in IEEE activities and is the founding Vice Chair of IEEE Nepal Subsection. Dr. Nava Raj Karki is very strongly promoting Academia-Industry collaboration at the Institute of Engineering and various multilateral initiatives like Erasmus Mundus Programme. He has published several papers on power system planning, reliability, distributed generation and restructuring and published a book on Electrical Engineering Materials.

<Rajesh Karki obtained his B.E. degree in electrical engineering from the Regional Engineering College (renamed National Institute of Technology), Durgapur, West Bengal, India in 1991, and M.Sc. and Ph.D. degrees in electrical power engineering in 1997 and 2000 respectively from the University of Saskatchewan, Canada. He worked for academic institutions and different industries in Nepal between 1991 and 1995, and for GE Industrial Systems, Peterborough, ON, Canada during 2000-2002. He joined the University of Saskatchewan, Canada as an Assistant Professor in 2002, where he currently works as an Associate Professor. During 2005-2012, he chaired the Power Systems Research Group at the University of Saskatchewan. He has served in various capacities in conferences and workshops, gave lectures in Canada and has published over 80 papers in reputed international journals and peer reviewed conferences. Dr. Karki has completed several consulting projects on system planning and reliability for Canadian electric utilities. He is a Senior Member of the IEEE, and a Professional Engineer in the Province of Saskatchewan, Canada. His research interests include power system reliability and planning, and reliability modeling and analysis of renewable energy systems.

Ajit K. Verma obtained B.Tech. (Electrical Engineering) and Ph.D. (Reliability Engineering) from Indian Institute of Technology Kharagpur, India in 1984 and 1988 respectively. He joined Indian Institute of Technology Bombay in 1988 where he holds the position of Professor of Electrical Engineering. He is currently working as a Professor of Technical Safety at University College Stord/Haugesund, Norway. He has supervised/co-supervised 28 doctoral and 88masters thesis in the area of Software Reliability, Reliable Computing, Power Systems Reliability (PSR), Reliability Centered Maintenance (RCM) and Probabilistic Safety/Risk Assessment (PSA). He has over 195 publications in various journals and conferences. He is a senior member of IEEE and a life fellow of IETE. He is the Editor-in-Chief of the International Journal of Systems Assurance Engineering and Management (IJSAEM) published by Springer, as well as a member of the Advisory Committee for the journal OPSEARCH also published by Springer. He has served as a Guest Editor of many international journals including IEEE Transactions on Reliability March, 2010. He has been the Conference Chairman of various International conferences and symposia.

Jaesok Choi is a Professor at Gyeongsang National University, Korea and has been teaching at the university since 1991. He did his masters and obtained his Ph.D. from Korea University in 1984 and 1990, respectively. He completed his post-doctoral research at University of Saskatchewan, Canada in 1996. He has published many papers in reputed international journals and conference proceeding, and undertaken many projects funded by the Korean Electric Power Corporation. His research interests include fuzzy applications, probabilistic production cost simulation, reliability evaluation and outage cost assessment of power systems, and development of flexible methods for power system. His recent research is specially focused on development and extension of methodology at load points of Composite Power Systems.

“Acerca de” puede pertenecer a otra edición de este título.

preigu

Osnabrück, Alemania

Vendedor de 5 estrellas

Vendedor de AbeBooks desde el 5 de agosto de 2024

Tarifas de envío de Alemania a Estados Unidos de America

Artículo	De 60 a 60 días hábiles	De 60 a 60 días hábiles
Primer artículo	EUR 70,00	EUR 70,00

Los plazos de entrega los establecen los vendedores y varían según el transportista y la ubicación. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relación con cargos adicionales para cubrir cualquier aumento en los costes de envío de los artículos.

Métodos de pago

PayPal

Descripción de la tienda

preigu betreibt einen Onlineversandhandel mit über 1 Mio. Produkten in verschiedenen Sortimenten. Das Kernsortiment besteht aus Büchern, Medien und Spielwaren. Ein gelungenes Einkaufserlebnis ist das Ziel einer jeden Bestellung bei preigu, denn der Kunde und seine Zufriedenheit stehen an erster Stelle. preigu setzt daher auf einen kompetenten Kundenservice, funktionierende Prozesse und schnelle Reaktion.

Especialidad

Bücher, Spielwaren

Información empresarial del vendedor

preigu GmbH & Co. KG

Lengericher Landstraße 19
Osnabrück, Alemania 49078

Contactar con el vendedorVer los artículos de este vendedorVer la página principal del vendedor

Condiciones de venta

About Us

Legal website operator identification:

preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany

Telephone: +49 (0) 541 / 580 72 84
Email: mail@preigu.de

VAT No: DE 455 380 498
AG Osnabrück - HRA 209647

PhG: preigu Verwaltung GmbH
AG Osnabrück - HRB 221793
CEO: Ansas Meyer

We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.

We are a member of the initiative "FairCommerce" since 30.11.2016.
For more information, see: https://www.haendlerbund.de/de/haendlerbund/interessenvertretung/faircommerce

Derecho al desistimiento

Instructions for revocation

Right of withdrawal for the sale of goods

Revocation right for consumers
(A ‘consumer' is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within 14 days without specifying any reasons.
The revocation period is 14 days with effect from the day,

on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;

To exercise your right of withdrawal, you must inform us (preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Telephone number: +49 (0) 541 / 580 72 84, E-Mail address: mail@preigu.de) by means of a clear declaration (e.g. a letter sent by post, or an e-mail) of your decision to withdraw from this contract. You can use the attached model withdrawal form for this purpose, which is, however, not mandatory.

You can also exercise your right of withdrawal online by clicking on a button labelled accordingly (such as ‘Withdraw from contract' or similar) on the AbeBooks/ZVAB website. If you use this online function, you will immediately receive a confirmation of receipt on a durable medium (e.g. via email) containing information on the content of the withdrawal notice, as well as the date and time of its receipt.

In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.

Consequences of the revocation

If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.

We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.

You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.

You bear the direct costs for returning the products.

You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.

Criteria for exclusion or expiry

The revocation right is not available for contracts

for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts. The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.

Specimen - revocation form

(If you wish to revoke the contract, please fill up this form and send it back to us.)

To preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Email address: mail@preigu.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date

(*) Cross out the incorrect option.

Sustainable Power Systems | Modelling, Simulation and Analysis

Descripción del artículo del vendedor

Detalles bibliográficos

Sinopsis

Acerca de