T�tulo: Surface Modification and Coating of Fibers, Polymers, and Composites: Techniques, Properties, and Applications (Elsevier Series on Tribology and Surface Engineering)
Editor: Elsevier
Fecha de publicaci�n: 2024
Idioma: Ingl�s
ISBN 10: 0443220298
ISBN 13: 9780443220296
Encuadernaci�n: Encuadernaci�n de tapa blanda
Estado: New

Acerca de

Sinopsis

Surface Modification and Coating of Fibers, Polymers, and Composites: Techniques, Properties, and Applications outlines techniques, concepts, characterization, and applications of surface modification for fibers, polymers, and coated fiber-reinforced composites allowing for precision engineering of the mechanical and thermal properties, electrical conductivity, and chemical resistance of these materials. A broad range of fiber types are covered and the book highlights how surface modification enhances the durability and sustainability of them. The book starts with chapters that discuss surface modification techniques for a range of different fibers and composites, including animal-based, mineral, leaf-based, root-based, and more. The next section of the book covers surface coating techniques as well as morphology, characterization, and computational modeling of surface-coated materials, and the book concludes with a section that outlines the properties and applications of coated fiber composites.

Acerca de los autores

Dr. Sanjay Mavinkere Rangappa is a Principal Research Scientist and Associate Professor at King Mongkut 's University of Technology North Bangkok, Thailand. He also serves as an Advisor within the President' s Office for University Promotion and Development towards International goals. Dr. Rangappa is the Executive Editor of Book Cluster: Fiber Science and Fibrous Composite Materials ( Elsevier), a former Associate Editor of Heliyon (Materials Science), and an Associate Editor of Frontier Materials Journals. He acts as a Board Member and Editor for various international journals in materials science and composites. He has reviewed over 250 international journals, including for Nature, Elsevier, Springer, and Wiley, as well as book proposals and conference submissions. He has published more than 425 articles in top- tier peer- reviewed journals indexed by SCI/Scopus, 13 editorial issues, 100 book chapters, and 70 books as an Editor with leading publishers such as Elsevier, Springer, Taylor & Francis, and Wiley. Additionally, he authored 3 books published by Elsevier and has presented research at numerous national and international conferences. Over 25 of his articles are highly cited in journals like the Journal of Cleaner Production and Carbohydrate Polymers. Dr. Rangappa is the lead editor for several special issues and has a Google Scholar citation count exceeding 39, 000, with an H- index of 100 and An i 100- Index of 475. He holds 1 US Patent, 11 UK Design Patents, 1 Thailand Patent, and 5 Indian patents. He has delivered keynote and invited talks globally, including Russia, South Africa, Malaysia, and India. Currently, he is an Academic Visitor at The University of Portsmouth, UK (2024), with upcoming visiting positions at various Malaysian and Indonesian universities from 2024 to 2027. His research focuses on Natural fiber composites, Polymer Composites, and Advanced Material Technology. He received the ‘Top Peer Reviewer 2019’ award from Publons, and the KMUTNB ‘Outstanding Young Researcher’ (2020) and' Outstanding Researcher’ (2021) awards. Recognized as one of the top 1% most- cited scientists by Stanford University (2019-2025), he ranks 5th in Thailand overall and 2nd In the Polymers category for 2023. He is also listed among the ‘Top 100 Scientists’ in Thailand by AD Scientific Index.

Dr. Sathish Kumar Palaniappan, Research Scientist (Specialist 2). Natural Composites Research Group Lab, The Sirindhorn International Thai – German Graduate School of Engineering (TGGS), King Mongkut's University of Technology North Bangkok, Thailand.

Dr. Sathish Kumar Palaniappan is currently working as a Research Scientist at King Mongkut's University of Technology North Bangkok, Thailand, where he did his postdoctoral research. He finished his bachelor’s degree in engineering (Mechanical) at the University College of Engineering Villupuram (constituent college of Anna University), Tamil Nadu, India, in 2012. He received his Master of Engineering from Kongu Engineering College in Perundurai, Tamil Nadu, India, in 2014 working in the stream of CAD/CAM. He also finished his PhD in the Department of Mining Engineering, Indian Institute of Technology (IIT) Kharagpur, West Bengal, India in 2021. His research interests include polymer nanocomposites/composites; polymer blends and biomaterials; thin film coatings; tribology; bio-degradable polymers; machining characteristics of ceramics and polymer composites; natural and synthetic polymers; multi-functional composite materials and nanomaterials; and natural fiber reinforced composites. He has been granted one Indian patent and has published more than 70 research papers in international/national journals and 32 book chapters with highly reputed publishers.

Dr. Ramesh Manickam is currently working as Professor & Vice-Principal at KIT-Kalaignar Karunanidhi Institute of Technology, Coimbatore, India. He has published over 60 research papers in SCI and Scopus indexed Journals, 60 book chapters and edited 2 books. He is the recipient of the All-India best Research award and best Publication award from the Society for Advancement of Human and Nature, India. His current research is focused on bio-materials, polymer nanocomposites, hybrid composites and additive manufacturing. He is a regular reviewer for more than 100 reputed Journals from Elsevier, Springer, Nature, SAGE, Taylor & Francis, Wiley, and RSC. He is recognized by Stanford University’s list of the world’s Top 2% of the Most-Cited Scientists in Single Year Citation Impact 2022.

Dr. Rajeshkumar Lakshminarasimhan is currently working as a Professor of Mechanical Engineering at Alliance University, Bengaluru, India. He has completed his post-doctoral research at King Mongkut’s University of Technology North Bangkok, Thailand and his doctoral degree at Anna University, Chennai in Composite materials. His research areas include metal matrix and polymer matrix composites, tribology, corrosion and surface engineering, and powder metallurgy. Also, Polymer biocomposites, biofibers and bio fillers, testing and characterization of fibers and composites. He has been granted one Indian patent, three international patents and nine published Indian patents. He has published 37 book chapters and more than 120 research papers in WoS/Scopus indexed journals and International and National conferences. He is an Editorial Board Member for Scientific Reports (Nature), and Associate Section Editor for Heliyon (Materials Science), an Elsevier journal. He is also the reviews editor for the Journal of Thermal Science and Energy Systems and more than 40 reputed international journals. He was listed in the Top 2% of scientists in the world by Stanford University during 2023

Prof. Dr.-Ing. habil. Suchart Siengchin is a former President of King Mongkut’s University of Technology North Bangkok and currently serves as the Director of TechnoPark at the same university. He earned his Dipl.-Ing. in Mechanical Engineering from the University of Applied Sciences Giessen/Friedberg, Germany in 1999, followed by an M.Sc. in Polymer Technology from the University of Applied Sciences Aalen in 2002, and another M.Sc. in Material Science from Erlangen-N�rnberg University in 2004. He obtained his Doctor of Philosophy in Engineering (Dr.-Ing.) from the Institute for Composite Materials at the University of Kaiserslautern in 2008, including postdoctoral research at Kaiserslautern University and Purdue University's School of Materials Engineering. In 2016, he received his habilitation from Chemnitz University in Saxony, Germany. In 2024, he was honored as an Honorary Fellow by RWTH Aachen University. He has also served as a Lecturer in Production and Material Engineering at the Sirindhorn International Thai-German Graduate School of Engineering, KMUTNB, and has been a full Professor and President of KMUTNB. He received the Outstanding Researcher Award in 2010, 2012, and 2013 at KMUTNB. His research focuses on Polymer Processing and Composite Materials. He is the Editor-in-Chief of the journal Applied Science and Engineering Progress, a Q1 indexed journal on Scopus, and has authored over 600 peer-reviewed journal articles, 15 editorial contributions, more than 100 book chapters, one authored book, and over 50 edited books. He has presented at more than 70 international and national conferences related to Materials Science and Engineering. Recognized as one of the world’s top 2% scientists by Stanford University for 2021- 2022, he received the National Excellence Researcher Award (Engineering and Research Industry) from Thailand's National Research Council in 2021, and has been listed as a Highly Cited Researcher in 2025 by Clarivate.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

I mainly carry imported books from South East Asia / South Asia for readers of all Age Groups.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

PLETOS INC
6931 51st Avenue, WOODSIDE, Woodside, NY, 11377, U.S.A.

Condiciones de venta y env�o

Condiciones de venta

We accept return for those books which are received damamged. Though we take appropriate care in packaing to avoid such situation.

Derecho a cancelaci�n

Si eres un consumidor puedes cancelar el presente contrato de acuerdo con lo indicado a continuaci�n. Son consumidores las personas f�sicas que act�en con un prop�sito ajeno a su actividad comercial, empresarial, oficio o profesi�n.

Documento de informaci�n al consumidor y usuario sobre el desistimiento

Derecho de desistimiento:

Tienes derecho a desistir del presente contrato en un plazo de 14 d�as naturales sin necesidad de justificaci�n.

El plazo de desistimiento expirar� a los 14 d�as naturales del d�a en que t� o un tercero que hayas indicado, distinto del transportista, adquiera la posesi�n material del �ltimo bien, componente o pieza.

Para ejercer el derecho de desistimiento, deber�s notificarnos a Books Puddle, 244 Madison Ave, Suite # 405, 10016, New York, New York, U.S.A., +1 7183015977, de tu decisi�n de desistir del contrato a trav�s de una declaraci�n inequ�voca (por ejemplo, una carta enviada por correo postal, fax o correo electr�nico). Podr�s utilizar el modelo de formulario de desistimiento que figura a continuaci�n, aunque su uso no es obligatorio. Tienes asimismo la opci�n de cumplimentar y enviar electr�nicamente el modelo de formulario de desistimiento o cualquier otra declaraci�n inequ�voca a trav�s de nuestro sitio web a "Mis pedidos" en "Mi cuenta". Si recurres a esta opci�n, te comunicaremos sin demora en un soporte duradero (por ejemplo, por correo electr�nico) la recepci�n de dicho desistimiento.

Para cumplir el plazo de desistimiento, basta con que la comunicaci�n relativa al ejercicio por tu parte de este derecho sea enviada antes de que venza el plazo correspondiente.

Consecuencias del desistimiento:

En caso de desistimiento por tu parte, te devolveremos todos los pagos recibidos de ti, incluidos los gastos de entrega (con la excepci�n de los gastos adicionales resultantes de la elecci�n por tu parte de una modalidad de entrega diferente a la modalidad menos costosa de entrega ordinaria que ofrezcamos) sin ninguna demora indebida y, en todo caso, a m�s tardar 14 d�as naturales a partir de la fecha en la que se nos informes de tu decisi�n de desistir del presente contrato. Procederemos a efectuar dicho reembolso utilizando el mismo medio de pago empleado por ti para la transacci�n inicial, a no ser que hayas dispuesto expresamente lo contrario; en todo caso, no incurrir�s en ning�n gasto como consecuencia del reembolso.

Podremos retenerte el reembolso hasta haber recibido los bienes, o hasta que hayas presentado una prueba de la devoluci�n de los mismos, seg�n qu� condici�n se cumpla primero. Deber�s devolvernos o entregarnos directamente los bienes a Books Puddle, 244 Madison Ave, Suite # 405, 10016, New York, New York, U.S.A., +1 7183015977, sin ninguna demora indebida y, en cualquier caso, a m�s tardar en el plazo de 14 d�as naturales a partir de la fecha en que nos comuniques tu decisi�n de desistimiento del contrato. Se considerar� cumplido el plazo si efect�as la devoluci�n de los bienes antes de que haya concluido dicho plazo. Deber�s asumir el coste directo de devoluci�n de los bienes. Solo ser�s responsable de la disminuci�n de valor de los bienes resultante de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento:

La entrega de peri�dicos, publicaciones especializadas o revistas con la excepci�n de contratos de suscripci�n; y
La entrega de contenido digital (incluyendo apps, MP3, etc.) que no hubiera sido entregado en un medio tangible (por ejemplo: CD o DVD), si al realizar tu pedido has aceptado que podemos proceder al env�o del producto y que no resulta posible su cancelaci�n una vez comienza la entrega.

Modelo de formulario de desistimiento

(S�lo debe cumplimentar y enviar el presente formulario si desea desistir del contrato)

A la atenci�n de: (Books Puddle, 244 Madison Ave, Suite # 405, 10016, New York, New York, U.S.A., +1 7183015977)

Por la presente le comunico/comunicamos* que desisto de mi/desistimos de nuestro* contrato de venta del siguiente bien/prestaci�n del siguiente servicio*

Pedido el/recibido el*:

Nombre del consumidor y usuario o de los consumidores y usuarios:

Domicilio del consumidor y usuario o de los consumidores y usuarios:

Firma del consumidor y usuario o de los consumidores y usuarios (solo si el presente formulario se presenta en papel):

Fecha:

* Eliminar en su caso

Condiciones de env�o

Tarifas de env�o en Estados Unidos de America

Tarifas de env�o en Estados Unidos de America
Cantidad del pedido	De 12 a 19 d�as h�biles	De 12 a 14 d�as h�biles
Primer art�culo	EUR 3.44	EUR 6.02

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.