Recent Research on Geotechnical Engineering, Remote Sensing, Geophysics and Earthquake Seismology | Proceedings of the 1st MedGU, Istanbul 2021 (Volume 3)
Idioma: inglés
Editorial: Springer, 2025
Serie: Libro 106 de 129 - Advances in Science, Technology & Innovation
- Tapa blanda
- Nuevo

Librería: preigu, Osnabrück, Alemaniapreigu
Vendedor de AbeBooks desde 5 de agosto de 2024
Condición: Nuevo
EUR 256,70
Cantidad disponible: 5 disponibles
Añadir al carritoDescripción del artículo del vendedor
N° de ref. del artículo 133224957
- Título
- Recent Research on Geotechnical Engineering, Remote Sensing, Geophysics and Earthquake Seismology | Proceedings of the 1st MedGU, Istanbul 2021 (Volume 3)
- Autor
- Attila Çiner (u. a.)
- Editorial
- Springer
- Año de publicación
- 2025
- Estado
- Neu
- Encuadernación
- Taschenbuch
- Idioma
- inglés
- ISBN 10
- 3031432207
- ISBN 13
- 9783031432200
- Peso del artículo
- 1374 gramos
- Dimensiones
- 279 x 210 x 26 mm
- Serie
- Libro 106 de 129: Advances in Science, Technology & Innovation
- Catálogos de vendedores
- Bücher
This edited book is based on the accepted papers for presentation at the 1st MedGU Annual Meeting, Istanbul, 2021. With five parts spanning a large spectrum of geological, geotechnical, and geophysical topics, this book presents a series of newest research studies that are nowadays relevant to Middle East, Mediterranean region, and Africa.
The book includes the latest research studies on seismic hazard and risk assessment, earthquake geodesy, seismotectonics, archaeoseismology and active faulting, well logging methods, geodesy and exploration/theoretical geophysics, geological engineering, geotechnical engineering and geoenvironment, geo-informatics, remote sensing and geohazards, basement architecture and potential data, and numerical and analytical methods in mining sciences and geomechanics.
“Sinopsis” puede pertenecer a otra edición de este título.
Acerca del autor
Attila Ciner:
Attila Çiner is a sedimentology and Quaternary geology professor at the Eurasia Institute of Earth Sciences at Istanbul Technical University, Turkey. After graduating from the Middle East Technical University in Ankara (1985), he obtained his M.Sc. degree at the University of Toledo, USA (1988), and his Ph.D. at the University of Strasbourg, France (1992). He works on the tectono-sedimentary evolution of basins and Quaternary depositional systems such as moraines, fluvial terraces, alluvial fans, and deltas. He uses cosmogenic nuclides to date these deposits. He primarily focuses on the glacial deposits and landscapes and tries to understand palaeoclimatic and palaeoenvironmental changes since the Last Glacial Maximum. Lastly, he was part of the Turkish Antarctic Expedition. He spent two months working on the site recognition and decision of the future Turkish scientific research station to be implemented on the continent. He is the editor-in-chief of Mediterranean Geoscience Reviews and the chief editor of Arabian J. of Geosciences, both published by Springer. He has published more than 100 peers-reviewed articles and book chapters.
Zeynal Abiddin Ergüler:
Prof. Dr. Zeynal Abiddin Erguler is a full professor at the geological engineering department at Kutahya Dumlupinar University (Turkey). Dr. Erguler holds a B.Sc. (1998), an M.Sc. (2001), and a Ph.D. degree (2007) in Geological Engineering from Hacettepe University (Turkey). His research interests mainly focus on rock mechanics, engineering geology, environmental geology, and soil mechanics. His current investigation is to understand and model the thermo- hydro-mechanical behaviour of shale rocks in the area of shale gas production. In addition to performing many types of research and industry-funded projects, he has also taught and supervised undergraduate and graduate students. In 2017, Dr. Erguler joined the Arabian Journal of Geosciences (AJGS) as an editor responsible for evaluating submissions in the fields of rock mechanics, engineering geology, environmental geology, and soil mechanics.
Mourad Bezzeghoud:
Mourad Bezzeghoud is a full professor at the University of Évora (Physics Department/School of Sciences and Technology and a researcher at the ICT/IIIFA). He is, presently, the president of the Scientific Council of the School of Sciences and Technology and the coordinator of the Instituto de Ciências da Terra (ICT) (Univ. of Évora). He has published dozens of articles in specialized revues and journals and several books and chapters in book. He works in the area of Earth Sciences (Solid Earth Geophysics) with an emphasis in seismology. He interacted with more than 198 collaborators in co-authorship of scientific works. He has leading and participated in several international and national research projects and co-organized a number of scientific conferences. He is, presently, an associated editor in Frontiers-Solid Earth Geophysics and the committee member of the Mediterranean Geosciences Union. In his curriculum, Ciência Vitae (https://www.cienciavitae.pt//9715-98D9-D5BB), the most frequent terms in the context of scientific and technological production are: earthquake seismology, seismic source, historical and instrumental seismicity, focal mechanisms, seismic risks, seismotectonics, nonlinear dynamics, seismic network, Ibero-Maghrebian region, and Muography as a new tool for Geophysics.
Mustafa Ustuner:
He received his Ph.D. in Geomatic Engineering from Yildiz Technical University from Türkiye. He was a short-term visiting researcher in the Geo-Spatial Analytics Lab at the University of South Florida in the USA and was a visiting researcher in the Department of Earth Observation at the Friedrich-Schiller-University of Jena in Germany. Currently, He is working as an assistant professor in the Department of Geomatic Engineering at Artvin Coruh University, Turkey. As an editorial task, he has been serving as an associate editor for the European Journal of Remote Sensing and Arabian Journal of Geosciences. He received the award for Top Reviewers for Geosciences-September 2018 from Publons.
Mehdi Eshagh:
Mehdi Eshagh is a professor of Geodesy in the department of engineering science at University West, Trollhättan, Sweden. He is interested to work on all geodetic subjects, but Satellite Gravimetry and its applications in the Solid Earth Geophysics are his main field of interest. He uses mathematics and statistics in his research regularly and tries to use these tools to develop new methodologies to solve different geodetic and geophysical problems.
Hesham El-Askary:
Prof. El-Askary received his Ph.D. in Computational Sciences and Informatics from George Mason University in 2004 along with his two M.S. degrees in Computational sciences and Earth Systems Sciences. In 2015, he earned Chapman University's elite Senior Wang-Fradkin Professorship award. In 2018, he was named a ‘Game Changer: Orange County Leaders Transforming the World’ by the Orange County Business Council. Prof. El-Askary served as the regional coordinator on a $3 ME project under the Horizon 2020 framework. He currently serves as the vice leader to the dissemination work package in the EU InDUST cost initiative. In 2019, Prof. El-Askary contributed among only 200 scientists worldwide to the IPCC report on the Desertification Chapter. He was also invited by the UN secretariat to the COP14 meeting in New Delhi to present on the sand and dust storms side event and to be part of the global sand and dust storms coalition. Prof. El-Askary has more than 150 peer-reviewed publications, book chapters, and conference paper and raised more than 15M USD in research funds. In 2022, he received 1 M USD from the US congress to advance his Earth Systems Science and Data Solution (EssDs) Lab research on Climate change.
ArkoprovoBiswas:
Dr. Arkoprovo Biswas is an assistant professor at the Department of Geology, Institute of Science, Banaras Hindu University (BHU), Varanasi. He received his B.Sc. (2002) in Geology from Presidency College, University of Calcutta, M.Sc. (2004) in Geological Science, M.Tech. (2006) in Earth and Environmental Science from IIT Kharagpur, and P.G. Diploma (2009) in Petroleum Exploration from Annamalai University. He joined Geostar Surveys India Pvt., Ltd., as a geophysicist in 2006 and later joined WesternGeco Electromagnetics, Schlumberger as an on-board data processing field engineer/geophysicist in 2007 and served there till 2008. In 2013, he received his Ph.D. in Exploration Geophysics from IIT Kharagpur. Later, he joined the Department of Earth and Environmental Sciences, Indian Institute of Science Education and Research Bhopal as a visiting faculty in 2014 and completed his tenure in 2015. He again joined the Wadia Institute of Himalayan Geology (WIHG) Dehradun in 2016as a research associate and later he joined BHU in October 2017. His main research interest includes Near Surface Geophysics, Integrated Electrical and Electromagnetic Methods, Geophysical Inversion, Mineral, and Groundwater Exploration, and Sub-surface Contamination.
Luca Gasperini:
Actual Position: Senior Scientist, Istituto di Scienze Marine, ISMAR, Italian National Research Council, Bologna: Adjunct Professor at University of Bologna Main Interests: •Geophysical methods; •Structural Geology; •Seismic Stratigraphy; •Plate Tectonic reconstructions; •Submarine Paleoseismology. •Impact Cratering. Laurea cum laude in Geology (1991), at University of Bologna (Italy). Research scientist at the National Research Council, Institute of Marine Sciences in Bologna, since 1988. He took part, or organized, several oceanographic expeditions, in the Mediterranean Sea and in the Atlantic and Pacific and Sub-Antarctic Oceans.
Klaus Günter Hinzen:
Klaus-G. Hinzen’s main interests are local earthquake seismology, engineering, and particularly archaeoseismology; he worked on source mechanisms of induced and teleseismic earthquakes at the Ruhr-University, Bochum (Ph.D. thesis). During eleven years at the Federal Institute for Geosciences and Natural Resources (BGR), Hannover, he gained experience in seismic in situ testing methods and the modelling of the dynamic behaviour of underground openings. In several projects, he developed methods to reduce environmental effects of blast vibrations. In 1995, he became the director of the Earthquake Geology division of the Institute for Geology and Mineralogy of University of Cologne (BNS). The division runs a local seismic network in the northern Rhine area (NRA) which he expanded to 40 seismic stations including a strong motion network and monitoring of Cologne Cathedral. In several projects, the first instrumental earthquake catalogue of the NRA was published, historical and palaeoseismologicalstudies were made and, a ground amplification model for the southern Lower Rhine Embayment was developed. Since two decades quantitative archaeo¬seismic studies based on laser scan surveys and discrete element modelling in the Rhine area, Turkey, Greece, Italy, Israel, and Tunisia are in the focus of his work which continues after his retirement in 2018 as a professor of the University of Cologne.
Murat Karakus:
Prof. Karakus holds a B.Sc. in Mining Engineering (1991) from Hacettepe University (Turkey) and a Ph.D. degree in Rock Mechanics (2000) from the University of Leeds, UK. He is currently working at the School of Civil, Environmental and Mining Engineering at the University of Adelaide. His research area is the field of experimental rock mechanics, fracture and damage mechanics, numerical analysis, plasticity and constitutive modelling, and strain burst/rock burst. He established a Cave Mining Research Centre at the University of Adelaide and has been working on many aspects of cave mining, e.g. mud-rush problem, cave backpropagation, preconditioning by hydraulic fracturing, and cave flow modelling. He is currently leading several research projects, including ARC―Australian Research Council grants, CRC-Deep Exploration Technologies, ACARP―Australian Coal Association Research, and industry-supported projects. Prof. Karakus has published several book chapters and over 150 papers in International Journals and Conferences. Prof. Karakus is a member of the ISRM Commission on Rockburst and the ISRM Commission on Deep Mining. He has been serving as the editorial board member of several journals.
Cesare Comina:
Born in Savigliano, March 13, 1977. From 2005 to 2008, he has been a research associate at Politecnico di Torino where he previously has been graduated in Civil Engineering and awarded of his Ph.D. in Geotechnical Engineering. From 2008 to 2015, he has been an assistant professor in Applied Geophysics at Universitàdegli Studi di Torino. He is currently an associate professor in Applied Geophysics at the same University. In the past, he has carried out his researches at the Department of Structural and Geotechnical Engineering of Politecnico di Torino, where he has collaborated to several funded research projects and participated to the scientific activities of the Geotechnical section. Currently, he pertains to the Department of Earth Sciences at Università degli Studi di Torino and collaborates with the group of Applied Geology. His researches involve the use of different geophysical methods for geotechnical and geological characterization.
Ali Karrech:
Professor Ali Karrech was a senior research scientist at CSIRO before joining UWA in July 2012. He obtained his Higher Doctorate (Habilitation) in Engineering Sciences from the Ecole Normale Supérieure Paris-Saclay (France) in 2014. He received his Ph.D. in Structures and Materials and his M.Sc. in Mechanics of Solids, Materials, and Structures from the Ecole des Ponts et Chaussées (Paris, France) in 2008 and 2004, respectively. In addition, he graduated with a Master of Engineering from Tunisia Polytechnic School in 2001. At UWA, he has been teaching units related to materials, structures, and resource engineering for more than 10 years. Professor Karrech's research expertise is in materials, structures, multi-physics modelling, minerals processing, and computer methods for resource engineering.
Alina Polonia, Institute of Marine Sciences-National Research Council (ISMAR-CNR), Bologna, Italy Fields of research: Marine geology and geophysics. Expertise: Tectonics, seismic data interpretation, submarine earthquake geology. Study areas: Calabrian Arc, Marmara Sea, Southern Chile, Eastern Mediterranean. My research aims to study tectonic processes and geohazards of convergent and transform plate margins through a multidisciplinary, multi-scale approach involving geophysical data at different scales (seismic reflection data, multi-beam, gravity, and magnetic data) and sediment cores. The final goal is to reconstruct the interplay between active tectonics, seismic shaking, tsunami wave propagation, fluid flow, and deposition of turbidites in tectonically controlled sedimentary basins.
Helder Chaminé:
H. I. Chaminé is a skilled geologist and professor of engineering geosciences at the School of Engineering (ISEP) of the Polytechnic of Porto, with over 32 years of experience in multidisciplinary geosciences research, consultancy, and practice. He studied geological engineering and geology (B.Sc., 1990) at the Universities of Aveiro and Porto (Portugal), respectively. He received his Ph.D. in geology at the University of Porto in 2000 and spent his postdoctoral research in applied geosciences at the University of Aveiro (2001-2003). In 2011, he received his Habilitation (D.Sc.) in geosciences from Aveiro University. Before joiningthe academy, he worked for over a decade on international projects for mining, geotechnics, and groundwater industry and/or academia related to geodynamics and regional geology, hard-rock hydrogeology and water resources, engineering geosciences and applied geomorphology, rock engineering, and georesources. His research interests span fundamental to applied fields: GIS mapping techniques for applied geology, structural geology and regional geology, engineering geosciences and rock engineering, slope geotechnics, mining geology and hydrogeomechanics, hard-rock hydrogeology, exploration hydrogeology, urban groundwater, and hydromineral resources. In addition, he has interests in mining geoheritage, the history of cartography, military geosciences and higher-education dissemination, skills, and core values.
“Acerca de” puede pertenecer a otra edición de este título.
preigu
Osnabrück, Alemania
Vendedor de AbeBooks desde 5 de agosto de 2024
Tarifas de envío de Alemania a Estados Unidos de America
| Artículo | De 60 a 60 días hábiles | De 60 a 60 días hábiles |
|---|---|---|
| Primer artículo | EUR 70,00 | EUR 70,00 |
Métodos de pago
- PayPal
Descripción de la tienda
Especialidad
Bücher, SpielwarenInformación empresarial del vendedor
preigu GmbH & Co. KG
Lengericher Landstraße 19
Osnabrück, Alemania 49078
Condiciones de venta
About Us
Legal website operator identification:
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: +49 (0) 541 / 580 72 84
Email: mail@preigu.de
VAT No: DE 455 380 498
AG Osnabrück - HRA 209647
PhG: preigu Verwaltung GmbH
AG Osnabrück - HRB 221793
CEO: Ansas Meyer
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
We are a member of the initiative "FairCommerce" since 30.11.2016.
For more information, see: https://www.haendlerbund.de/de/haendlerbund/interessenvertretung/faircommerce
Derecho al desistimiento
Instructions for revocation
Right of withdrawal for the sale of goods
Revocation right for consumers
(A ‘consumer' is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within 14 days without specifying any reasons.
The revocation period is 14 days with effect from the day,
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
To exercise your right of withdrawal, you must inform us (preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Telephone number: +49 (0) 541 / 580 72 84, E-Mail address: mail@preigu.de) by means of a clear declaration (e.g. a letter sent by post, or an e-mail) of your decision to withdraw from this contract. You can use the attached model withdrawal form for this purpose, which is, however, not mandatory.
You can also exercise your right of withdrawal online by clicking on a button labelled accordingly (such as ‘Withdraw from contract' or similar) on the AbeBooks/ZVAB website. If you use this online function, you will immediately receive a confirmation of receipt on a durable medium (e.g. via email) containing information on the content of the withdrawal notice, as well as the date and time of its receipt.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
-
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
-
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
-
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
-
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts. The revocation right expires prematurely in case of contracts
-
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
-
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
-
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
-
To preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Email address: mail@preigu.de :
-
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service () -
Ordered on ()/ received on ()
-
Name of the consumer(s)
-
Address of the consumer(s)
-
Signature of the consumer(s) (only in case of a notification on paper)
-
Date
(*) Cross out the incorrect option.