Proceedings of the Second International Conference on Press-in Engineering 2021, Kochi, Japan
Idioma: inglés
Editorial: CRC Press, 2021
- Tapa dura
- Nuevo

Librería: moluna, Greven, Alemaniamoluna
Vendedor de AbeBooks desde 9 de julio de 2020
Condición: Nuevo
EUR 254,65
Cantidad disponible: Más de 20 disponibles
Añadir al carritoDescripción del artículo del vendedor
N° de ref. del artículo 595275100
- Título
- Proceedings of the Second International Conference on Press-in Engineering 2021, Kochi, Japan
- Editorial
- CRC Press
- Año de publicación
- 2021
- Estado
- New
- Encuadernación
- Encuadernación de tapa dura
- Idioma
- inglés
- ISBN 10
- 1032104147
- ISBN 13
- 9781032104140
The Second International Conference on Press-in Engineering (ICPE) 2021 was organized by the International Press-in Association (IPA). The conference is held every three years and the main theme this time is "Evolution and Social Contribution of Press-in Engineering for Infrastructure Development, and Disaster Prevention and Mitigation". These proceedings contain 2 keynote lectures, 3 state-of-the-art lectures and about 60 papers from more than 10 countries.
This publication provides good practice guidance on the application of the press-in piling method, to satisfy the requirements of geo-structures which are embedded utilizing prefabricated piles. It covers actual examples of the press-in piling method applied to various geo-structures, such as temporary and permanent retaining walls, cofferdams, cut-off walls, foundation piles etc.
The content addresses the technical and construction issues relating to the selection of the appropriate type of press-in piling method, in accordance with required structural design criteria and soil and working conditions.
The aim of this publication is to concisely describe practical uses of the press-in piling method for project owners, designers, contractors, academic researchers and other people in the construction industry.
“Sinopsis” puede pertenecer a otra edición de este título.
Acerca del autor
Dr. Tatsunori MATSUMOTO obtained his Bachelor of Engineering and Master of Science from Kanazawa University, Japan. He joined the Department of Civil Engineering of Kanazawa University in 1981 as research associate. He received the degree of Doctor of Engineering from Kyoto University in 1989. He became an Associate Professor in 1991 and promoted to a Professor in August 1999. He retains an active involvement in research into pile dynamics and deformation of pile foundations including piled rafts subjected to load combinations. He is a member of the Japanese Geotechnical Society and the International Society for Soil Mechanics and Geotechnical Engineering. He is Vice-President of the International Press-in Association. He has published more than 250 technical papers, including more than 60 Journal papers.
Dr. Katsutoshi UENO graduated Hokkaido University, Japan in 1989, and obtained his Master of Engineering in 1991. He worked as a research associate in The University of Utsunomiya from 1991 to 1998. Then he moved to Tokushima University. In 2001, he received the degree Doctor of Engineering from Tokyo Institute of Technology. Currently he works as an Associate Professor of Geotechnical Engineering in the field of Disaster Science and Mitigation, Tokushima University. His research interests are in fields of deformation and stability problems of Geo-structures, such as shallow foundations, retaining structures, unexpected underground cavities.
Dr. Koichi ISOBE is an associate professor in the Division of Civil Engineering, Hokkaido University. He received the degree of Doctor Engineering from Kyoto University in 2007 and started his career at Nagaoka University of Technology. He has a strong interest in Interaction between Soils and Foundations, Soil Dynamics, Earthquake Engineering, Slope Stability and Data Science. He is also a member of Technical Committee (TC1 Application of cantilever type steel tubular pile wall embedded to stiff ground) in the International Press-in Association (IPA). He presents the stability of cantilever type steel tubular pile retaining wall embedded to stiff ground and the size effect of footing in ultimate bearing capacity of intermediate soil by using Rigid Plastic Finite Element Method (RPFEM) in this book.
Dr. Hidetoshi NISHIOKA worked at the Railway Technical Research Institute from 2001 to 2019. He researched foundation structures using sheet piles and its design methods and code writing of design methods for the foundation of railway structures. He received the degree of Doctor of Engineering from Tokyo Institute of Technology in 2009. In 2019 he became a professor in the Department of Civil and Environmental Engineering, Faculty of Science and Engineering, Chuo University. His current research activities focus not only on summarizing the results of experiments and analyses on foundation structures and underground structures but also on linking them to social implementation as practical design, construction, and maintenance methods.
Dr. Koji WATANABE is an associate professor of the Department of Civil Engineering, Aichi institute of Technology, Japan. He received the degree of Doctor Engineering from Tokyo Institute of Technology in 2015. His research interests are foundation engineering involving pile foundation, shallow foundation, ground improvement and geotechnical centrifuge model tests. He developed some pile design and construction methods based on his research findings. He aims to develop design and construction methods on geotechnical engineering by conducting fundamental and applied researches.
“Acerca de” puede pertenecer a otra edición de este título.
moluna
Greven, Alemania
Vendedor de AbeBooks desde 9 de julio de 2020
Tarifas de envío de Alemania a Estados Unidos de America
| Artículo | De 26 a 60 días hábiles | De 26 a 60 días hábiles |
|---|---|---|
| Primer artículo | EUR 48,99 | EUR 48,99 |
Métodos de pago
- Cheque
- Giro bancario
- PayPal
Descripción de la tienda
Información empresarial del vendedor
Moluna GmbH
Engberdingdamm 27
Greven, Alemania 48268
Condiciones de venta
Aviso legal
Reconocimiento legal del oferente:
Moluna GmbH
Representadas por el gerente Helge Blischke
Engberdingdamm 27
48268 Greven
Alemania
Teléfono: 02571/5698933
Fax: 02571/5698930
E-Mail: abe@moluna.de
Identificación tributaria del impuesto a las ganancias: DE296281834
inscripto en el Registro Público de Comercio del Tribunal de Primera Instancia Steinfurt
Número HRB de Registro en el Registro Público de Comercio 10553
Somos miembros de la iniciativa « FairCommerce » desde 24.07.2015.
Para más información, consulte: www.haendlerbund.de/faircommerce.
Derecho al desistimiento
Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona física que actúe con fines ajenos a su actividad comercial, empresarial, oficio o profesión.
Información sobre el derecho de desistimiento
Derecho legal de desistimiento
Tiene derecho a rescindir este contrato en un plazo de 14 días sin dar ningún motivo.
El periodo de desistimiento vencerá a los 14 días desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesión física del último bien o del último lote o pieza.
Para ejercer el derecho de desistimiento, complete de forma electrónica y envíe una declaración clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a través de un soporte duradero (por ejemplo, por correo electrónico).
Para cumplir con el plazo de desistimiento, basta con que envíe su comunicación relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.
Efectos del desistimiento
Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de envío (excepto los gastos adicionales que surjan si elige un tipo de envío que no sea el tipo de envío estándar más económico que ofrecemos).
Podemos hacer una deducción del reembolso por la pérdida de valor de cualquier bien suministrado, si la pérdida es el resultado de una manipulación innecesaria por su parte.
Efectuaremos el reembolso sin demoras indebidas y, a más tardar, 14 días después de que se nos informe de su decisión de rescindir este contrato.
Efectuaremos el reembolso utilizando el mismo medio de pago que utilizó para la transacción inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrirá en ningún cargo como resultado de dicho reembolso.
Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.
Deberá devolver los bienes o entregarlos a moluna, Greven, Germany, sin demoras indebidas y, en cualquier caso, en un plazo máximo de 14 días a partir del día en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercancía antes de que venza el periodo de 14 días. Tendrá que asumir los gastos directos de devolución de los bienes. Usted solo es responsable de la disminución del valor de los bienes como resultado de una manipulación distinta a la necesaria para establecer la naturaleza, las características y el funcionamiento de los bienes.
Excepciones al derecho de desistimiento
El derecho de desistimiento no se aplica a lo siguiente:
- La entrega de periódicos, diarios o revistas, con la excepción de los contratos de suscripción; y
- El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, aceptó que podíamos empezar a entregarlo y que no podría desistir una vez iniciada la entrega.