Principles of Extreme Mechanics (XM) in Design for Reliability (DfR) | With Special Emphasis on Recent Advances in Materials Characterization and Experimentation Techniques

Editor

Springer

Fecha de publicaci�n

2022

Idioma

Ingl�s

ISBN 10

9811567220

ISBN 13

9789811567223

Encuadernaci�n

Taschenbuch

Estado

Neu

Dimensiones

Peso

400 gramos

Cat�logos de vendedores

B�cher

Acerca de

Sinopsis

This book addresses issues pertinent to mechanics and stress generation, especially in recent advanced cases of technology developments, spanning from micrometer interconnects in solar photovoltaics (PV), next-gen energy storage devices to multilayers of nano-scale composites enabling novel stretchable/flexible conductor technologies. In these cases, the mechanics of materials have been pushed to the extreme edges of human knowledge to enable cutting-edge, unprecedented functionalities and technological innovations. Synchrotron X-ray diffraction, in situ small-scale mechanical testing combined with physics-based computational modeling/simulation, has been widely used approaches to probe these mechanics of the materials at their extreme limits due to their recently discovered distinct advantages. The techniques discussed in this manuscript are highlights specially curated from the broad body of work recently reported in the literature, especially ones that the author had led thepursuits at the frontier himself. Extreme stress generation in these advanced material leads to often new failure modes, and hence, the reliability of the final product is directly affected. From the recent topics and various advanced case studies covered in this book, the reader gets an updated knowledge of how new mechanics can and has been applied in Design-for-Reliability (DfR) for some of the latest technological innovations known in our modern world. Further, this also helps in building better designs, which may avoid the pitfalls of the current practiced trends.

Acerca del autor

Dr. Arief Suriadi Budiman received his B.S. in mechanical engineering from Institute of Technology, Bandung (ITB), Indonesia, M.EngSc. in materials engineering from Monash Univ., Australia, and Ph.D. in Materials Science and Engineering from Stanford University, CA, in 2008. During his doctoral candidacy at Stanford’s Department of Materials Science & Engineering under the supervision of Professor William D. Nix (MRS Von Hippel Award 2007), he received several research awards (MRS Graduate Silver Award 2006, MRS Best Paper 2006) and contributed to several high-impact journal publications (Acta Materialia, Applied Physics Letters, Journal of Electronic Materials). As a graduate student, he gave two symposium invited talks as well in the MRS spring and fall meetings in 2006. More recently, he has been awarded the prestigious Los Alamos National Laboratory (LANL) Director's Research Fellowship to conduct top strategic research for the energy and national security missions of the Los Alamos National Laboratory. At the Center for Integrated Nanotechnologies (CINT) at Los Alamos, his research program involves nanomaterials for extreme environments with potential applications in advanced energy systems including for next-generation nuclear power reactors. He has been active in MRS throughout his professional career – from winning an MRS Graduate Student Silver Award in 2006 as a Ph.D. student to organizing various symposia (Mechanical Behavior of Nanostructured Composites, Advances in In Situ Experimentation Techniques Enabling Novel and Extreme Materials Design) in MRS Spring meetings in the USA, as well as ICMAT (International Conference of Materials in Advanced Technologies) organized by MRS-Singapore Chapter. He most recently led as the symposium chair in MRS (Materials Research Society) Spring 2019 Meeting in Phoenix, AZ, and concurrently served as Lead Editor of a Focus Issue of Journal of Materials Research on the topic of “Plasticity and Fractureat the Nanoscales” published in May 2019. His involvement in other materials and technology societies includes TMS (The Mineral, Metals and Materials Society) and AVS (American Vacuum Society), where he served as Co-Chairs in various symposia in TMS and as Members of the Board of Directors for the AVS TFUG (Thin Films Users Group). Additionally, he serves on the editorial board of the Journal of Electronic Materials. He has authored over 80 refereed scientific papers, conference articles, books, book chapters and patents.
Dr. Arief Suriadi Budiman is currently leading a dynamic, international group researching nanomaterials and nanomechanics and their implications for extending the extreme limits of materials as well as their applications in the next-generation energy technologies (solar PV, extreme environments, energy storage, etc.). His work has also recently received the famed Berkeley Lab Scientific Highlights twice in May 2010 and June 2013 (the latter was forhis novel, innovative characterization technique that enables thin silicon solar PV technology). He also recently served an academic stint at MIT (Massachusetts Institute of Technology) in Boston, MA, as part of a faculty immersion/training exchange to conduct research in energy (Solar PV, as well as next-generation energy storage/Li-ion). In Singapore, he is currently running a multi-million dollars research grant program on enabling ultrathin (< 80 micron) silicon solar cells, tunable impact resistance of novel materials design enabled by additive manufacturing as well as novel metallic stretchable conductor technology for next-generation biomedical/healthcare flexible/wearable devices sponsored by the National Research Foundation (NRF), Ministry of Education (MOE) and other premier funding agencies of the Singapore’s Government. He has been invited to give invited lectures/seminars on his research program in various top international scientific/technological conferences. He hasauthored/co-authored several high-impact journal publications (Acta Materialia, Solar Energy Materials & Solar Cells, Progress in Photovoltaics, Materials Science Engineering A, Materials, etc.). He has also recently published a book “Probing Crystal Plasticity at the Nanoscales – Synchrotron X-ray Microdiffraction” (Springer 2015). He has two U.S. patents and one pending.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

preigu betreibt einen Onlineversandhandel mit �ber 1 Mio. Produkten in verschiedenen Sortimenten. Das Kernsortiment besteht aus B�chern, Medien und Spielwaren. Ein gelungenes Einkaufserlebnis ist das Ziel einer jeden Bestellung bei preigu, denn der Kunde und seine Zufriedenheit stehen an erster Stelle. preigu setzt daher auf einen kompetenten Kundenservice, funktionierende Prozesse und schnelle Reaktion.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

preigu GmbH & Co. KG
Lengericher Landstra�e 19, Osnabr�ck, 49078, Germany

Condiciones de venta y env�o

Condiciones de venta

Standard Business Terms and customer information

I. Standard business terms

� 1 Basic provisions

(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (preigu GmbH & Co. KG) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.

(2) A ?consumer' in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwh...

M�s informaci�n

Derecho al desistimiento

Instructions for revocation

Right of withdrawal for the sale of goods

Revocation right for consumers
(A ‘consumer' is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within 14 days without specifying any reasons.
The revocation period is 14 days with effect from the day,

on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;

To exercise your right of withdrawal, you must inform us (preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabr�ck, Telephone number: +49 (0) 541 / 580 72 84, E-Mail address: mail@preigu.de) by means of a clear declaration (e.g. a letter sent by post, or an e-mail) of your decision to withdraw from this contract. You can use the attached model withdrawal form for this purpose, which is, however, not mandatory.

You can also exercise your right of withdrawal online by clicking on a button labelled accordingly (such as ‘Withdraw from contract' or similar) on the AbeBooks/ZVAB website. If you use this online function, you will immediately receive a confirmation of receipt on a durable medium (e.g. via email) containing information on the content of the withdrawal notice, as well as the date and time of its receipt.

In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.

Consequences of the revocation

If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.

We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.

You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.

You bear the direct costs for returning the products.

You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.

Criteria for exclusion or expiry

The revocation right is not available for contracts

for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts. The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.

Specimen - revocation form

(If you wish to revoke the contract, please fill up this form and send it back to us.)

To preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabr�ck, Email address: mail@preigu.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date

(*) Cross out the incorrect option.

Condiciones de env�o

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 60 a 60 d�as h�biles	De 60 a 60 d�as h�biles
Primer art�culo	EUR 70.00	EUR 70.00

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor