Druck auf Anfrage Neuware - Printed after ordering - This book addresses issues pertinent to mechanics and stress generation, especially in recentadvanced cases of technology developments, spanning from micrometer interconnects in solar photovoltaics (PV), next-gen energy storage devices to multilayers of nano-scale composites enabling novel stretchable/flexible conductor technologies. In these cases, the mechanics of materials have been pushed to the extreme edges of human knowledge to enable cutting-edge, unprecedented functionalities and technological innovations. Synchrotron X-ray diffraction, in situ small-scale mechanical testing combined with physics-based computational modeling/simulation, has been widely used approaches to probe these mechanics of the materials at their extreme limits due to their recently discovered distinct advantages. The techniques discussed in this manuscript are highlights specially curated from the broad body of work recently reported in the literature, especially ones that the author had led thepursuits at the frontier himself. Extreme stress generation in these advanced material leads to often new failure modes, and hence, the reliability of the final product is directly affected. From the recent topics and various advanced case studies covered in this book, the reader gets an updated knowledge of how new mechanics can and has been applied in Design-for-Reliability (DfR) for some of the latest technological innovations known in our modern world. Further, this also helps in building better designs, which may avoid the pitfalls of the current practiced trends.

N� de ref. del art�culo 9789811567193

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo: Principles of Extreme Mechanics (XM) in Design for Reliability (DfR) : With Special Emphasis on Recent Advances in Materials Characterization and Experimentation Techniques
Editor: Springer Nature Singapore, Springer Nature Singapore
Fecha de publicaci�n: 2021
Idioma: Ingl�s
ISBN 10: 9811567190
ISBN 13: 9789811567193
Encuadernaci�n: Buch
Estado: Neu
Dimensiones: 241�mil�metros de ancho por 160 de alto por 20 de largo
Peso: 559 gramos

Acerca de

Sinopsis

This book addresses issues pertinent to mechanics and stress generation, especially in recent advanced cases of technology developments, spanning from micrometer interconnects in solar photovoltaics (PV), next-gen energy storage devices to multilayers of nano-scale composites enabling novel stretchable/flexible conductor technologies. In these cases, the mechanics of materials have been pushed to the extreme edges of human knowledge to enable cutting-edge, unprecedented functionalities and technological innovations. Synchrotron X-ray diffraction, in situ small-scale mechanical testing combined with physics-based computational modeling/simulation, has been widely used approaches to probe these mechanics of the materials at their extreme limits due to their recently discovered distinct advantages. The techniques discussed in this manuscript are highlights specially curated from the broad body of work recently reported in the literature, especially ones that the author had led the pursuits at the frontier himself. Extreme stress generation in these advanced material leads to often new failure modes, and hence, the reliability of the final product is directly affected. From the recent topics and various advanced case studies covered in this book, the reader gets an updated knowledge of how new mechanics can and has been applied in Design-for-Reliability (DfR) for some of the latest technological innovations known in our modern world. Further, this also helps in building better designs, which may avoid the pitfalls of the current practiced trends.

Acerca del autor

Dr. Arief Suriadi Budiman received his B.S. in mechanical engineering from Institute of Technology, Bandung (ITB), Indonesia, M.EngSc. in materials engineering from Monash Univ., Australia, and Ph.D. in Materials Science and Engineering from Stanford University, CA, in 2008. During his doctoral candidacy at Stanford’s Department of Materials Science & Engineering under the supervision of Professor William D. Nix (MRS Von Hippel Award 2007), he received several research awards (MRS Graduate Silver Award 2006, MRS Best Paper 2006) and contributed to several high-impact journal publications (Acta Materialia, Applied Physics Letters, Journal of Electronic Materials). As a graduate student, he gave two symposium invited talks as well in the MRS spring and fall meetings in 2006. More recently, he has been awarded the prestigious Los Alamos National Laboratory (LANL) Director's Research Fellowship to conduct top strategic research for the energy and national security missions of the Los Alamos National Laboratory. At the Center for Integrated Nanotechnologies (CINT) at Los Alamos, his research program involves nanomaterials for extreme environments with potential applications in advanced energy systems including for next-generation nuclear power reactors. He has been active in MRS throughout his professional career – from winning an MRS Graduate Student Silver Award in 2006 as a Ph.D. student to organizing various symposia (Mechanical Behavior of Nanostructured Composites, Advances in In Situ Experimentation Techniques Enabling Novel and Extreme Materials Design) in MRS Spring meetings in the USA, as well as ICMAT (International Conference of Materials in Advanced Technologies) organized by MRS-Singapore Chapter. He most recently led as the symposium chair in MRS (Materials Research Society) Spring 2019 Meeting in Phoenix, AZ, and concurrently served as Lead Editor of a Focus Issue of Journal of Materials Research on the topic of “Plasticity and Fractureat the Nanoscales” published in May 2019. His involvement in other materials and technology societies includes TMS (The Mineral, Metals and Materials Society) and AVS (American Vacuum Society), where he served as Co-Chairs in various symposia in TMS and as Members of the Board of Directors for the AVS TFUG (Thin Films Users Group). Additionally, he serves on the editorial board of the Journal of Electronic Materials. He has authored over 80 refereed scientific papers, conference articles, books, book chapters and patents.
Dr. Arief Suriadi Budiman is currently leading a dynamic, international group researching nanomaterials and nanomechanics and their implications for extending the extreme limits of materials as well as their applications in the next-generation energy technologies (solar PV, extreme environments, energy storage, etc.). His work has also recently received the famed Berkeley Lab Scientific Highlights twice in May 2010 and June 2013 (the latter was forhis novel, innovative characterization technique that enables thin silicon solar PV technology). He also recently served an academic stint at MIT (Massachusetts Institute of Technology) in Boston, MA, as part of a faculty immersion/training exchange to conduct research in energy (Solar PV, as well as next-generation energy storage/Li-ion). In Singapore, he is currently running a multi-million dollars research grant program on enabling ultrathin (< 80 micron) silicon solar cells, tunable impact resistance of novel materials design enabled by additive manufacturing as well as novel metallic stretchable conductor technology for next-generation biomedical/healthcare flexible/wearable devices sponsored by the National Research Foundation (NRF), Ministry of Education (MOE) and other premier funding agencies of the Singapore’s Government. He has been invited to give invited lectures/seminars on his research program in various top international scientific/technological conferences. He hasauthored/co-authored several high-impact journal publications (Acta Materialia, Solar Energy Materials & Solar Cells, Progress in Photovoltaics, Materials Science Engineering A, Materials, etc.). He has also recently published a book “Probing Crystal Plasticity at the Nanoscales – Synchrotron X-ray Microdiffraction” (Springer 2015). He has two U.S. patents and one pending.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Das Unternehmen AHA-BUCH GmbH: Seit der Gr�ndung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisg�nstig wie m�glich ihren B�cherwunsch zu erf�llen. Unsere Firma besch�ftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine W�nsche! Auf �ber 3700 m2 Fl�che haben wir �ber 100.000 B�cher, Modernes Antiquariat und Spiele auf Lager.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

AHA-BUCH GmbH
Garlebsen 48, Einbeck, 37574, Germany

Condiciones de venta y env�o

Condiciones de venta

T�rminos y Condiciones Generales e Informaci�n del Cliente / Pol�tica de Privacidad

I. T�rminos y Condiciones Generales

� 1 Disposiciones b�sicas

(1)Los siguientes t�rminos y condiciones se aplican a todos los contratos que celebre con nosotros como proveedor (AHA-BUCH GmbH) a trav�s de las plataformas de Internet AbeBooks y/o ZVAB. A menos que se acuerde lo contrario, se objetar� la inclusi�n de cualquiera de sus propios t�rminos y condiciones utilizados por usted.
(2)Un consumidor en el sentid...

M�s informaci�n

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a AHA-BUCH GmbH, Einbeck, Germany, sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

Enviamos su pedido despu�s de recibirlos
para art�culos disponibles las �ltimas 24 horas,
para art�culos con suministro nocturno a m�s tardar 48 horas.
En caso de que necesitemos pedir un art�culo a nuestro proveedor, nuestro tiempo de env�o depende de la fecha de recepci�n de los art�culos, pero los art�culos se enviar�n el mismo d�a.

Nuestro objetivo es enviar los art�culos pedidos de la manera m�s r�pida, pero tambi�n m�s eficiente y segura a nuestros clientes.

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 30 a 40 d�as h�biles	De 7 a 14 d�as h�biles
Primer art�culo	EUR 62.80	EUR 72.80

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor