With the rapid proliferation of information and communications technology, industrial automation has undergone a sweeping transformation toward intelligent manufacturing. Wireless communication is widely considered to be one of the key technologies enabling intelligent manufacturing. On one hand, deterministic communication with high reliability and low latency is typically required in industrial automation applications. On the other hand, wireless communication in industrial settings is hindered by strictly limited communication resources and many other factors which mainly derive from the shared and error-prone nature of the wireless channels used. The limited communication resources and harsh channel conditions pose considerable challenges for reliable, real-time data transmission in industrial wireless networks.

Resource optimization methods are vital to ensuring the deterministic performance of industrial wireless networks. Traditional resource optimization methods adopt the isolated resource optimization methods for each protocol layer, which is inherently local-optimal and leads performance uncontrollable. To focus on "Performance Controllable Industrial Wireless Networks", this book presents thejoint resource optimization methods across multiple protocol layers for industrial wireless networks; reviews recent, major advances; and discusses the practical implementations of the proposed methods.

The joint resource optimization methods discussed here will greatly benefit scientists and researchers in the areas of industrial automation and Industrial Internet of Things. To gain the most from this book, readers should have a fundamental grasp of wireless communication, scheduling theory, and convex optimization.

Acerca del autor

Prof. Haibin Yu has been with Shenyang Institute of Automation (SIA), Chinese Academy of Sciences (CAS) since April 1993, and currently is the director of Shenyang Branch, Chinese Academy of Sciences. He received his B.S. and M.S. from the Northeastern University, Shenyang, P.R. China in Industrial Automation in 1984 and 1987 respectively, and Ph. D degree from the same university in Control Theory and Control Engineering in 1997. Prof. Yu’s primary research interests are in industrial communication and control systems, and the development of industrial sensor network technology. His research has been funded by both basic and applied research agencies in China, including Preliminary Program by National Basic Research Program of China (973 Program), National Natural Science Foundation for Distinguished Young Scholars, Key Project of National Natural Science Foundation of China, National Major Program on Science and Technology, Main Directional Program of Chinese Academy of Sciencesand National High-tech R&D Program of China (863 Program). His research group at SIA has published more than 200 technical papers and two books. His research work has continually received national recognition through winning several prestigious awards such as the State Technological Invention Award, State Science and Technology Progress Award, and Provincial and Ministerial Awards. The Wireless Networks for Industrial Automation-Process Automation (WIA-PA) technology standard proposed by his team was approved by the International Electrotechnical Commission (IEC) as an international standard: WIA-PA Communication Network and Communication Profile 62601 in 2011. He is an ISA Fellow.

Prof. Haibin Yu has also been very active in serving professional communities. He is the Deputy Editor-in-Chief of Information and Control. He is also the Chairman of China National Technical Committee for Industrial Process Measurement and Control Standardization, the Deputy Directorof Chinese Association of Automation. He is also an expert member for Intelligent Manufacturing Fund of the Ministry of Science and Technology of the People’s Republic of China. He served as Peer-reviewer in Automation for National Natural Sciences Foundation of China.

Prof. Peng Zeng received the Ph.D. degree in mechatronic engineering from the Graduate School of the Chinese Academy of Sciences, Beijing, China, in 2005. He is currently a Vice Director of Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, China. He is also the Director of the Network Control System Key Laboratory, Chinese Academy of Sciences. He has authored or coauthored more than 100 conference papers, journal articles, and book chapters related to his research area and five pending/filed U.S. patents. His research interests include wireless sensor network and industrial communication technologies.

Prof. Meng Zheng received his B.S. degree in information and computing science and his M.S. degree in operational research and cybernetics from Northeastern University, Shenyang, China, in 2005 and 2008 respectively, and his Ph.D. degree in mechatronic engineering from University of Chinese Academy of Sciences, Beijing, China, in 2012. From November 2010 to October 2012, he was a visiting Ph.D. student with Fraunhofer Heinrich Hertz Institute, Berlin, Germany. From December 2018 to November 2019, he was a visiting scholar with Technical University of Berlin, Berlin, Germany. He won the National Science Fund for Excellent Young Scholars in 2020. He is currently a Professor with Shenyang Institute of Automation, Chinese Academy of Sciences. His research interests include industrial wireless networks and Internet of Things.

Prof. Chi Xu received the Ph.D. degree from University of Chinese Academy of Sciences, Beijing, China, in 2017. He is an Associate Professor with Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, China. His research interests include industrial wireless networks, 5G URLLC, and tactile Internet. Dr. Xu serves as a 3GPP standardization delegate. He is a Voting Member of IEEE 1918.1 Working Group for Tactile Internet and a member of IEEE 1932.1 Working Group for Licensed/Unlicensed Spectrum Interoperability in Wireless Mobile Networks.

Prof. XiJin received the Ph.D. degree in computer science from Northeastern University, Shenyang, China, in 2013. She is currently a Professor with the Shenyang Institute of Automation, Chinese Academy of Sciences, China. Her research interests include industrial networks, real-time scheduling, Internet of Things, and cyber-physical systems. Prof. Jin is also a senior member of China Computer Federation (CCF) and a committee member of the CCF technical committee on embedded systems.

Prof. Wei Liang received the PhD degree in mechatronic engineering from Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, China, in 2002. She is currently a professor at the Shenyang Institute of Automation, Chinese Academy of Sciences. As a primary participant/a project leader, she developed the WIA-PA and WIA-FA standards for industrial wireless networks, which are specified by IEC62601 and IEC 62948, respectively. Her current research interests include industrial wireless networks and Internet of Things. She was a recipient of the International Electrotechnical Commission 1906 Award in 2015, as a distinguished expert of industrial wireless network technology and standards. She is a senior member of the IEEE.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Professional Book Seller offering fast shipping and hassle-free returns for every order. Our 100% satisfaction policy guarantees that you get the best product and the best service at the best price!

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

Basi6 International LLC
1018 Camino Lago, Irving, TX, 75039, U.S.A.

Condiciones de venta y env�o

Condiciones de venta

Professional Book Seller shipping from Multiple Locations Worldwide for fastest delivery possible!

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a Basi6 International, Irving, Texas, U.S.A., sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

All orders shipped via FedEx or DHL and delivered to your doorstep within 3-5 days. We do not ship to P.O.Boxes and a proper street address must be provided to avoid any delays.

Tarifas de env�o en Estados Unidos de America

Tarifas de env�o en Estados Unidos de America
Cantidad del pedido	De 5 a 14 d�as h�biles	De 3 a 6 d�as h�biles
Primer art�culo	EUR 0.00	EUR 0.00

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor