Druck auf Anfrage Neuware - Printed after ordering - This book highlights the most important aspects of mathematical modeling, computer simulation, and control of medium-scale power systems. It discusses a number of practical examples based on Sri Lanka's power system, one characterized by comparatively high degrees of variability and uncertainty. Recently introduced concepts such as controlled disintegration to maintain grid stability are discussed and studied using simulations of practical scenarios. Power systems are complex, geographically distributed, dynamical systems with numerous interconnections between neighboring systems. Further, they often comprise a generation mix that includes hydro, thermal, combined cycle, and intermittent renewable plants, as well as considerably extended transmission lines. Hence, the detailed analysis of their transient behaviors in the presence of disturbances is both highly theory-intensive and challenging in practice. Effectively regulating and controlling powersystem behavior to ensure consistent service quality and transient stability requires the use of various schemes and systems. The book's initial chapters detail the fundamentals of power systems; in turn, system modeling and simulation results using Power Systems Computer Aided Design/Electromagnetic Transients including DC (PSCAD/EMTDC) software are presented and compared with available real-world data. Lastly, the book uses computer simulation studies under a variety of practical contingency scenarios to compare several under-frequency load-shedding schemes. Given the breadth and depth of its coverage, it offers a truly unique resource on the management of medium-scale power systems.

N� de ref. del art�culo 9789811352638

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo

Modeling, Simulation, and Control of a Medium-Scale Power System

Editor

Springer Nature Singapore, Springer Nature Singapore

Fecha de publicaci�n

2019

Idioma

Ingl�s

ISBN 10

9811352631

ISBN 13

9789811352638

Encuadernaci�n

Taschenbuch

Estado

Neu

Cat�logos de vendedores

Acerca de

Sinopsis

This book highlights the most important aspects of mathematical modeling, computer simulation, and control of medium-scale power systems. It discusses a number of practical examples based on Sri Lanka's power system, one characterized by comparatively high degrees of variability and uncertainty. Recently introduced concepts such as controlled disintegration to maintain grid stability are discussed and studied using simulations of practical scenarios.

Power systems are complex, geographically distributed, dynamical systems with numerous interconnections between neighboring systems. Further, they often comprise a generation mix that includes hydro, thermal, combined cycle, and intermittent renewable plants, as well as considerably extended transmission lines. Hence, the detailed analysis of their transient behaviors in the presence of disturbances is both highly theory-intensive and challenging in practice. Effectively regulating and controlling power

system behavior to ensure consistent service quality and transient stability requires the use of various schemes and systems.

The book's initial chapters detail the fundamentals of power systems; in turn, system modeling and simulation results using Power Systems Computer Aided Design/Electromagnetic Transients including DC (PSCAD/EMTDC) software are presented and compared with available real-world data. Lastly, the book uses computer simulation studies under a variety of practical contingency scenarios to compare several under-frequency load-shedding schemes. Given the breadth and depth of its coverage, it offers a truly unique resource on the management of medium-scale power systems.

Acerca del autor

Tharangika Bambaravanage obtained her B.Sc. (Engineering), M.Eng. in Electrical Engineering and M.Phil. in Power System Stability and Control from the University of Moratuwa, respectively, in 1998, 2005 and 2017. She has been a senior lecturer at the Institute of Technology, University of Moratuwa, since 2017.
Asanka Rodrigo obtained his BSc(Hons) and MSc in Electrical Engineering, respectively, in 2002 and 2004, from University of Moratuwa, and PhD in Industrial Engineering from Hong Kong University of Science and Technology in 2010. He has been a senior lecturer in Electrical Engineering at the Faculty of Engineering of University of Moratuwa since 2010.
Sisil Kumarawadu obtained his BSc(Hons) in Electrical Engineering from University of Moratuwa in 1996. He obtained his MEng in advanced Systems Control Engineering and PhD in Robotics and Intelligent Systems in 2000 and 2003, respectively, from Saga National University, Japan. From April 2003 to July 2005, he was with Intelligent Transportation Systems Research Center, NCTU, Taiwan, as a postdoctoral research fellow. Currently, he is a professor in electrical engineering at University of Moratuwa.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Das Unternehmen AHA-BUCH GmbH: Seit der Gr�ndung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisg�nstig wie m�glich ihren B�cherwunsch zu erf�llen. Unsere Firma besch�ftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine W�nsche! Auf �ber 3700 m2 Fl�che haben wir �ber 100.000 B�cher, Modernes Antiquariat und Spiele auf Lager.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

AHA-BUCH GmbH
Garlebsen 48, Einbeck, 37574, Germany

Condiciones de venta y env�o

Condiciones de venta

T�rminos y Condiciones Generales e Informaci�n del Cliente / Pol�tica de Privacidad

I. T�rminos y Condiciones Generales

� 1 Disposiciones b�sicas

(1)Los siguientes t�rminos y condiciones se aplican a todos los contratos que celebre con nosotros como proveedor (AHA-BUCH GmbH) a trav�s de las plataformas de Internet AbeBooks y/o ZVAB. A menos que se acuerde lo contrario, se objetar� la inclusi�n de cualquiera de sus propios t�rminos y condiciones utilizados por usted.
(2)Un consumidor en el sentid...

M�s informaci�n

Derecho a cancelaci�n

Condiciones de env�o

Enviamos su pedido despu�s de recibirlos
para art�culos disponibles las �ltimas 24 horas,
para art�culos con suministro nocturno a m�s tardar 48 horas.
En caso de que necesitemos pedir un art�culo a nuestro proveedor, nuestro tiempo de env�o depende de la fecha de recepci�n de los art�culos, pero los art�culos se enviar�n el mismo d�a.

Nuestro objetivo es enviar los art�culos pedidos de la manera m�s r�pida, pero tambi�n m�s eficiente y segura a nuestros clientes.

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 30 a 40 d�as h�biles	De 7 a 14 d�as h�biles
Primer art�culo	EUR 61.59	EUR 71.59

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor