X, 228 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband besto�en, daher M�ngelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

N� de ref. del art�culo 5648BB

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo

Modeling, Analysis and Control of Hydraulic Actuator for Forging.

Editor

Singapore, Springer.

Fecha de publicaci�n

2018

Idioma

Ingl�s

ISBN 10

9811055823

ISBN 13

9789811055829

Encuadernaci�n

Encuadernaci�n de tapa dura

Cat�logos de vendedores

Technik

Acerca de

Sinopsis

This book describes load modeling approaches for complex work pieces and batch forgings, and demonstrates analytical modeling and data-driven modeling approaches for known and unknown complex forging processes. It overcomes the current shortcomings of modeling, analysis and control approaches, presenting contributions in three major areas: In the first, several novel modeling approaches are proposed: a process/shape-decomposition modeling method to help estimate the deformation force; an online probabilistic learning machine for the modeling of batch forging processes; and several data-driven identification and modeling approaches for unknown forging processes under different work conditions. The second area develops model-based dynamic analysis methods to derive the conditions of stability and creep. Lastly, several novel intelligent control methods are proposed for complex forging processes.

One of the most serious problems in forging forming involves the inaccurate forging conditions, velocity and position offered by the hydraulic actuator due to the complexity of both the deformation process of the metal work piece and the motion process of the hydraulic actuator. The book summarizes the current weaknesses of modeling, analysis and control approaches. are summarized as follows: a) With the current modeling approaches it is difficult to model complex forging processes with unknown parameters, as they only model the dynamics in local working areas but do not effectively model unknown nonlinear systems across multiple working areas; further, they do not take the batch forging process into account, let alone its distribution modeling. b) All previous dynamic analysis studies simplify the forging system to having a single-frequency pressure fluctuation and neglect the influences of non-linear load force. Further, they fail to take the flow equation in both valves and cylinders into account. c) Conventional control approaches only consider the linear deformation force and pay no attention to sudden changes and the motion synchronization for the multi-cylinder system, making them less effective for complex, nonlinear time-varying forging processes subject to sudden changes.

Acerca del autor

XinJiang Lu received the B.E. and M.E. degrees in the School of Mechanical & Electrical Engineering, Central South University, China, and the Ph.D degree in the Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong. Currently, he is currently a Professor of the School of Mechanical & Electrical Engineering, Central South University.

Dr. Lu has broad interest in academic as well as applied research. He has published 1 book with John Wiley & Sons in 2014, and published over 30 SCI journal papers and more than 20 conference papers. As PI, he has taken charge of 8 projects. His current research interests are in modeling and control of hydraulic actuator, data learning, process modeling and control, robust design, integration of design and control.

Dr. Lu serves as one of the Editorial Board Members in both International Journal of Industrial and Manufacturing Systems Engineering and International Journal of Computer& Software Engineering. He was awarded New Century Excellent Talents award by the Chinese Ministry of Education in 2013, Hiwin Doctoral Dissertation Award in 2011, Excellent Thesis Award for Master’s Degree of both Hunan Province and Central South University respectively in 2007 and 2006. He is a member of IEEE.

The list of the selected publications:

[1] Lu X.J., Zou W., Huang M.H., A Novel Spatiotemporal LS-SVM Method for Complex Distributed Parameter Systems with Applications to Curing Thermal Process, IEEE Transactions on Industrial Informatics, 12(3), pp.1156 - 1165, 2016.

[2] Fan B., Lu X.J^*., Huang M.H., A Novel LS-SVM Control for Unknown Nonlinear Systems with Application to Complex Forging Process, Journal of Central South University, 2016 (Accepted)

[3] Fan B., Lu X.J*., Li H.X., Probabilistic Inference based Least Squares Support Vector Machine for Modeling under Noisy Environment,IEEE Trans. Systems, Man, and Cybernetics: Systems, 10.1109/TSMC.2016.2531674, 2016. (Accepted)

[4] Zhou C., Lu X.J^*.,Huang M.H., Dempster-Shafer theory-based robust least squares support vector machine for stochastic modelling, Neurocomputing, 182, pp.145-153i 2016.

[5] Lu X.J., Zhou C., Huang M.H., Lv W.B. Regularized online sequential extreme learning machine with adaptive regulation factor for time-varying nonlinear system, Neurocomputing, 174,pp.617-626, 2016.

[6] Lu X.J., Liu C., Huang M.H. Online Probabilistic Extreme Learning Machine for Distribution Modeling of Complex Batch Forging Processes, IEEE Transactions on Industrial Informatics, 11(6), pp.1277-1286, 2015.

[7] Lu X.J., Zou W., Huang M.H. An adaptive modeling method for time-varying distributed parameter processes with curing process applications, Nonlinear Dynamics, 82(1), pp. 865-876, 2015。

[8] Lu X.J., Fan B., Huang, M.H. (2015). A Novel LS-SVM Modeling Method for a Hydraulic Press Forging Process with Multiple Localized Solutions, IEEE Transactions on Industrial Informatics, 11(3), pp. 663-670, 2015.

[9] Lu X.J., Zou W., Huang M.H., Deng K. (2015). A process/shape-decomposition modeling method for deformation force estimation in complex forging processes, International Journal of Mechanical Sciences, 90, pp.190-199, 2015.

[10] Lu X.J., Huang M.H. (2015). Two-Level Modeling Based Intelligent Integration Control for Time-Varying Forging Processes, Industrial and engineering chemistry research, 54, pp.5690-5696, 2015.

[11] Lu X.J., Huang M.H., (2015). A Novel Multi-level Modeling Method for Complex Forging Processes on Hydraulic Press Machines, International Journal of Advanced Manufacturing Technology,79(9), pp.1869-1880, 2015.

[12] Lei J., Lu X.J., Li Y.B., Huang M.H., Zou W., (2015). Approximate-model Based Estimation Method for Dynamic Response of Forging Processes, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28(3), pp.565-572, 2015.

[13] Lu X.J., Li H.X., Huang M.H. (2014). Data-Driven Robust Design for a Curing Oven, IEEE Trans. on Components, Packaging and Manufacturing Technology, 4(8), pp. 1366-1373, 2014.

[14] Lu X.J., Li H.X., Huang M.H. (2014). Stability and robust design using a sector nonlinearity approach for nonlinear manufacturing systems, Mechanism and Machine Theory, 82, pp. 115-127, 2014.

[15] Lu X.J., Huang M.H. (2014). A KL/Subspace Modeling Method for Integrated Design and Control in Curing Processes, Industrial and engineering chemistry research, 53, pp. 14377-14384, 2014.

[16] Lu X.J., Huang M.H. (2014). A simple online modeling approach for a time-varying forging process, International Journal of Advanced Manufacturing Technology, 75, pp. 1197-1205, 2014

[17] Lu X.J., Li Y.B., Huang M.H. (2013). Operation-region-decomposition-based SVD/NN Modeling Method for Complex Hydraulic Press Machines, Industrial & Engineering Chemistry Research,52, pp.17221-17228, 2013.

[18] Lu X.J. & Huang, M.H. (2013). Nonlinear-Measurement-Based Integrated Robust Design and Control for Manufacturing System, IEEE Trans. on Industrial Electronics, 60(7), pp.2711-2720, 2013.

[19] Lu X.J. & Huang, M.H. (2013). Multi-domain modeling based robust design for nonlinear manufacture system, International Journal of Mechanical Sciences, 75, pp.80-86, 2013.

[20] Lu X.J. & Huang, M.H. (2012). System decomposition based multi-level control for hydraulic press machine. IEEE Trans. on Industrial Electronics, 59(4), pp. 1080-1087, 2012.

[21] Lu X.J. & Li, H.-X. (2012). Model based probabilistic robust design with data-based uncertainty compensation for model uncertainty. ASME Trans. on Journal of Mechanical Design, 134(2), pp. 021004, 2012.

[22] Lu X.J. & Li, H.-X. (2012). Probabilistic robust design for covariance minimization of nonlinear system. Mechanism and Machine Theory, , 52, pp. 195-205, 2012.

[23] Lu X.J. & Li, H.-X. (2011). Robust Design for Dynamic system under Model Uncertainty. ASME Trans. on Journal of Mechanical Design, 133(2), pp:021006.

[24] Lu X.J. & Huang, M.H. (2011). Subspace modeling based Nonlinear Measurement for Process Design. Industrial & Engineering Chemistry Research , 50, 13457-13465.

[25] Lu X.J. Li, H.-X., & Yuan, X. (2010). PSO-based intelligent integration of design and control for a kind of curing process. Journal of process control, 20, 1116-1125

[26] Lu X.J., Li, H.-X., Chen C. L. (2010). Variable sensitivity based deterministic robust design for nonlinear system. ASME Trans. on Journal of Mechanical Design. 132(6),pp: 064502.

[27] Lu X.J., Li, H.-X., Chen C. L. (2010). Robust Optimal Design with Consideration of Robust Eigenvalue Assignment. Industrial & Engineering Chemistry Research, 49 (7), pp: 3306–3315.

[28] Lu X.J., Li, H.-X.^*, Duan J.-A., Sun D. (2010). Integrated Design and Control under Uncertainty: A Fuzzy Modeling Approach. Industrial & Engineering Chemistry Research. 49(3), pp:1312–1324.

[29] Lu X.J. & Li, H.-X. (2009). Perturbation Theory based Robust Design for Model Uncertainty. ASME Trans. on Journal of Mechanical Design. 131(11), pp:111006.

[30] Lu X.J. & Li, H.-X. (2009). Stability based Robust Eigenvalue Design for Tolerance. ASME Trans. on Journal of Mechanical Design. 131(8), pp: 081007.

MingHui Huang received the B.E., M.E. and Ph.D degrees in the School of Mechanical & Electrical Engineering, Central South University, China.

Currently, he is a full professor of the School of Mechanical & Electrical Engineering, Central South University. He was awarded both “Chang Jiang Scholar” and New Century Excellent Talents award by the Chinese Ministry of Education, China. His research interests include forging forming, machine design and manufacturing, design theory, fault diagnosis, digital manufacturing.

The list of the selected publications:

[1] Lu X.J., Zou W., Huang M.H., A Novel Spatiotemporal LS-SVM Method for Complex Distributed Parameter Systems with Applications to Curing Thermal Process, IEEE Transactions onIndustrial Informatics, 12(3), pp.1156 - 1165, 2016.

[2] lex="" forging="" process,="" journal="" of="" central="" south="" university,="" 2016="" (accepted)

[3] Zhou C., Lu X.J^*.,Huang M.H., Dempster-Shafer theory-based robust least squares support vector machine for stochastic modelling, Neurocomputing, 182, pp.145-153i 2016.

[4] Lu X.J., Zhou C., Huang M.H., Lv W.B. Regularized online sequential extreme learning machine with adaptive regulation factor for time-varying nonlinear system, Neurocomputing, 174,pp.617-626, 2016.

[5] Lu X.J., Liu C., Huang M.H. Online Probabilistic Extreme Learning Machine for Distribution Modeling of Complex Batch Forging Processes, IEEE Transactions on Industrial Informatics, 11(6), pp.1277-1286, 2015.

[6] Lu X.J., Zou W., Huang M.H.^ations, Nonlinear Dynamics, 82(1), pp. 865-876, 2015。

[7] Lu X.J., Fan B., Huang, M.H. (2015). A Novel LS-SVM Modeling Method for a Hydraulic Press Forging Process with Multiple Localized Solutions, IEEE Transactions on Industrial Informatics, 11(3), pp. 663-670, 2015.

[8] Lu X.J., Zou W., Huang M.H., Deng K. (2015). A process/shape-decomposition modeling method for deformation force estimation in complex forging processes, International Journal of Mechanical Sciences, 90, pp.190-199, 2015.

[9] Lu X.J., Huang M.H. (2015). Two-Level Modeling Based Intelligent Integration Control for Time-Varying Forging Processes, Industrial and engineering chemistry research, 54, pp.5690-5696, 2015.

[10] Lu X.J., Huang M.H., (2015). A Novel Multi-level Modeling Method for Complex Forging Processes on Hydraulic Press Machines, International Journal of Advanced Manufacturing Technology,79(9), pp.1869-1880, 2015.

[11] Lei J., Lu X.J., Li Y.B., Huang M.H., Zou W., (2015). Approximate-model Based Estimation Method for Dynamic Response of Forging Processes, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28(3), pp.565-572, 2015.

[12] Lu X.J., Li H.X., Huang M.H. (2014). Data-Driven Robust Design for a Curing Oven, IEEE Trans. on Components, Packaging and Manufacturing Technology, 4(8), pp. 1366-1373, 2014.

[13] Lu X.J., Li H.X., Huang M.H. (2014). Stability and robust design using a sector nonlinearity approach for nonlinear manufacturing systems, Mechanism and Machine Theory, 82, pp. 115-127, 2014.

[14] Lu X.J., Huang M.H. (2014). A KL/Subspace Modeling Method for Integrated Design and Control in Curing Processes, Industrial and engineering chemistry research, 53, pp. 14377-14384, 2014.

[15] Lu X.J., Huang M.H. (2014). A simple online modeling approach for a time-varying forging process, International Journal of Advanced Manufacturing Technology, 75, pp. 1197-1205, 2014

[16] Lu X.J., Li Y.B., Huang M.H. (2013). Operation-region-decomposition-based SVD/NN Modeling Method for Complex Hydraulic Press Machines, Industrial & Engineering Chemistry Research,52, pp.17221-17228, 2013.

[17] Lu X.J. & Huang, M.H. (2013). Nonlinear-Measurement-Based Integrated Robust Design and Control for Manufacturing System, IEEE Trans. on Industrial Electronics, 60(7), pp.2711-2720, 2013.

[18] Lu X.J. & Huang, M.H. (2013). Multi-domain modeling based robust design for nonlinear manufacture system, International Journal of Mechanical Sciences, 75, pp.80-86, 2013.

[19] Lu X.J. & Huang, M.H. (2012). System decomposition based multi-level control for hydraulic press machine. IEEE Trans. on Industrial Electronics, 59(4), pp. 1080-1087, 2012.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Das Antiquariat im Hufelandhaus geh�rt zu den groessten wissenschaftlichen Antiquariaten in Europa. Wir sind als Mitglied des Verbandes Deutscher Antiquare regelm�ssig auf Antiquariatsmessen vertreten. Der umfangreiche Bestand, ca. 40.000 B�cher, hat seinen Schwerpunkt in der Medizin des 19. Jahrhunderts. J�hrlich erscheinen 8-10 Antiquariatskataloge zu einzelnen Sachgebieten. Diese Kataloge stellen jeweils nur eine Auswahl aus unseren Buchbest�nden dar. Desweiteren erscheint j�hrlich der Preiskatalog mit den zur�ckliegenden Jahrg�ngen/Back Volumes der Zeitschriften des wissenschaftlichen Springer-Verlages. Wir sind jederzeit am Ankauf von Bibliotheken und Einzelwerken interessiert. Auf Wunsch erfolgt eine Besichtigung vor Ort. Antiquariat im Hufelandhaus GmbH HRB 80262 B, Amtsgericht Berlin-Charlottenburg Ust.Id.Nr. DE 222395865

Ver la p�gina web de la librer�a

Miembro de asociaci�n

Los miembros de estas asociaciones est�n comprometidos a mantener los est�ndares m�s altos. Ellos garantizan la autenticidad de los art�culos que ofrecen a la venta. Tienen descripciones expertas y detalladas, se�alan los defectos significativos y/o restauraciones, muestran los precios exactos y llevan a cabo un servicio de imparcialidad y honestidad durante la experiencia de la compra.

Informaci�n empresarial del vendedor

Universit�tsbuchhandlung Herta Hold GmbH
Dorotheenstra�e 16, Berlin, 10117, Germany

Condiciones de venta y env�o

Condiciones de venta

Allgemeine Lieferungs- und Zahlungsbedingungen der Fa. Antiquariat im Hufelandhaus GmbH vorm. Lange & Springer

Geltungsbereich

Die nachfolgenden Allgemeinen Gesch�ftsbedingungen gelten ausschlie�lich f�r die Internet-Gesch�ftsbeziehung der Antiquariat im Hufelandhaus GmbH vorm. Lange & Springer (nachfolgend H�ndler genannt). Ma�geblich ist die zum Zeitpunkt der Bestellung geltende Fassung. Abweichende Vereinbarungen/ Bedingungen der Bestellerin/ des Bestellers bed�rfen zu ihrem Anerkenntnis der ...

M�s informaci�n

Derecho a cancelaci�n

Si eres un consumidor puedes cancelar el presente contrato de acuerdo con lo indicado a continuaci�n. Son consumidores las personas f�sicas que act�en con un prop�sito ajeno a su actividad comercial, empresarial, oficio o profesi�n.

Documento de informaci�n al consumidor y usuario sobre el desistimiento

Derecho de desistimiento:

Tienes derecho a desistir del presente contrato en un plazo de 14 d�as naturales sin necesidad de justificaci�n.

El plazo de desistimiento expirar� a los 14 d�as naturales del d�a en que t� o un tercero que hayas indicado, distinto del transportista, adquiera la posesi�n material del �ltimo bien, componente o pieza.

Para ejercer el derecho de desistimiento, deber�s notificarnos a Antiquariat im Hufelandhaus GmbH, Antiquariat im Hufelandhaus, vormals Lange & Springer, 10117, Berlin, Germany, +49 03031504 196, de tu decisi�n de desistir del contrato a trav�s de una declaraci�n inequ�voca (por ejemplo, una carta enviada por correo postal, fax o correo electr�nico). Podr�s utilizar el modelo de formulario de desistimiento que figura a continuaci�n, aunque su uso no es obligatorio. Tienes asimismo la opci�n de cumplimentar y enviar electr�nicamente el modelo de formulario de desistimiento o cualquier otra declaraci�n inequ�voca a trav�s de nuestro sitio web a "Mis pedidos" en "Mi cuenta". Si recurres a esta opci�n, te comunicaremos sin demora en un soporte duradero (por ejemplo, por correo electr�nico) la recepci�n de dicho desistimiento.

Para cumplir el plazo de desistimiento, basta con que la comunicaci�n relativa al ejercicio por tu parte de este derecho sea enviada antes de que venza el plazo correspondiente.

Consecuencias del desistimiento:

En caso de desistimiento por tu parte, te devolveremos todos los pagos recibidos de ti, incluidos los gastos de entrega (con la excepci�n de los gastos adicionales resultantes de la elecci�n por tu parte de una modalidad de entrega diferente a la modalidad menos costosa de entrega ordinaria que ofrezcamos) sin ninguna demora indebida y, en todo caso, a m�s tardar 14 d�as naturales a partir de la fecha en la que se nos informes de tu decisi�n de desistir del presente contrato. Procederemos a efectuar dicho reembolso utilizando el mismo medio de pago empleado por ti para la transacci�n inicial, a no ser que hayas dispuesto expresamente lo contrario; en todo caso, no incurrir�s en ning�n gasto como consecuencia del reembolso.

Podremos retenerte el reembolso hasta haber recibido los bienes, o hasta que hayas presentado una prueba de la devoluci�n de los mismos, seg�n qu� condici�n se cumpla primero. Deber�s devolvernos o entregarnos directamente los bienes a Antiquariat im Hufelandhaus GmbH, Antiquariat im Hufelandhaus, vormals Lange & Springer, 10117, Berlin, Germany, +49 03031504 196, sin ninguna demora indebida y, en cualquier caso, a m�s tardar en el plazo de 14 d�as naturales a partir de la fecha en que nos comuniques tu decisi�n de desistimiento del contrato. Se considerar� cumplido el plazo si efect�as la devoluci�n de los bienes antes de que haya concluido dicho plazo. Deber�s asumir el coste directo de devoluci�n de los bienes. Solo ser�s responsable de la disminuci�n de valor de los bienes resultante de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento:

La entrega de peri�dicos, publicaciones especializadas o revistas con la excepci�n de contratos de suscripci�n; y
La entrega de contenido digital (incluyendo apps, MP3, etc.) que no hubiera sido entregado en un medio tangible (por ejemplo: CD o DVD), si al realizar tu pedido has aceptado que podemos proceder al env�o del producto y que no resulta posible su cancelaci�n una vez comienza la entrega.

Modelo de formulario de desistimiento

(S�lo debe cumplimentar y enviar el presente formulario si desea desistir del contrato)

A la atenci�n de: (Antiquariat im Hufelandhaus GmbH, Antiquariat im Hufelandhaus, vormals Lange & Springer, 10117, Berlin, Germany, +49 03031504 196)

Por la presente le comunico/comunicamos* que desisto de mi/desistimos de nuestro* contrato de venta del siguiente bien/prestaci�n del siguiente servicio*

Pedido el/recibido el*:

Nombre del consumidor y usuario o de los consumidores y usuarios:

Domicilio del consumidor y usuario o de los consumidores y usuarios:

Firma del consumidor y usuario o de los consumidores y usuarios (solo si el presente formulario se presenta en papel):

Fecha:

* Eliminar en su caso

Condiciones de env�o

Versandkosten

Die Versandkosten sind vom Besteller zus�tzlich zu dem Kaufpreis zu zahlen.

Die H�he der anfallenden Versandkosten ist bei der Artikelbeschreibung und den Preisangaben der ausgew�hlten Ware zu finden.

Im Falle der Aus�bung des Widerrufsrechts gelten folgende Versandkostenregelungen f�r die R�cksendung der Ware (Auszug aus dem Widerrufsrecht):

Sie haben die Waren unverz�glich und in jedem Fall sp�testens binnen vierzehn Tagen ab dem Tag, an dem Sie uns �ber den Widerruf dieses Vertrags unterrichten, an uns zur�ckzusenden oder zu �bergeben, Die Frist ist gewahrt, wenn Sie die Waren vor Ablauf der Frist von vierzehn Tagen absenden. Sie tragen die unmittelbaren Kosten der R�cksendung der Waren.

Die Ware wird in der Regel innerhalb von 2 Tagen nach Bestelleingang verschickt. Bitte entnehmen Sie den voraussichtlichen Liefertermin Ihrer Bestellbest�tigung. Die Versandkostenpauschalen basieren auf Durchschnittswerten f�r 1 kg schwere B�cher. �ber abweichende Kosten (z.B. wegen eines sehr schweren Buches) werden Sie gegebenenfalls vom Verk�ufer informiert.

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 30 a 60 d�as h�biles	De 30 a 60 d�as h�biles
Primer art�culo	EUR 30.00	EUR 30.00

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.