Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This book highlights the qualitative and quantitative sequential changes in microstructure of P22 steel under various stress and temperature conditions. The P22 alloy is an established material used under elevated temperature and stress for the component.

N� de ref. del art�culo 784368301

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo

Microstructure Atlas of P22 Steel

Editor

Springer, Berlin|Springer Nature Singapore|Springer

Fecha de publicaci�n

2023

Idioma

Ingl�s

ISBN 10

9819901162

ISBN 13

9789819901166

Encuadernaci�n

Encuadernaci�n de tapa dura

Estado

New

Cat�logos de vendedores

Importe

Acerca de

Sinopsis

This book highlights the qualitative and quantitative sequential changes in microstructure of P22 steel under various stress and temperature conditions. This has been further followed by drawing correlation between specific features like precipitate size variation with creep strain / creep time and so on.

Acerca del autor

Dr. Rajat K. Roy is currently positioned as a Principal Scientist at CSIR-National Metallurgical Laboratory, Jamshedpur (India). After completing his Bachelor of Engineering and Master of Engineering in Metallurgy from Bengal Engineering College, Shibpur, Howrah (India), he obtained his Ph.D. degree in Metallurgical and Materials Engineering from Indian Institute of Technology, Kharagpur (India). His research areas are compositional design and development of nanostructured and amorphous materials through rapid solidification, metal joining (brazing), characterization of ferritic steels by electromagnetic NDE. He has authorships of 54 papers in SCI journals, 12 patents, 3 copyrights and 2 book chapters. Dr. Roy has exposures on the development of nanomaterials in Carnegie Mellon University, Pittsburgh (USA) under BOYSCAST fellowship and Korea University, Seoul (Republic of Korea) under BK21 program.

Mr. Anil K. Das is working as General Manager at NTPC Energy Technology Research Alliance (NETRA), the R&D wing of NTPC Limited (India). He is heading the Advanced Scientific Service Division there, which has labs/group related to Non-destructive Evaluation (NDE), Advanced Material Research, Creep & Fatigue, Corrosion and Environment, Analytical Chemistry, Lub & Transformer Oils, Coal & Combustion and Resin. He has done his B.Tech and M.Tech both from I.I.T. Kanpur (India). He has more than 30 years of experience in health and life assessment of power plant components. He was awarded National NDT Award in 2011 for Excellence in Application of NDE in Industries. He has filed 5 patents (2 granted) and 5 copyrights. He is life member of ISNT and member of ASNT. He is ASNT Level-3 certified in four NDT Methods (UT, MT, ET & PT) and CSWIP-Level 2 in PAUT. He is associated with more than 350 publications of reports and technical papers. His major work areas are advanced inspection and analysis tools for power plant components.

Dr. Avijit Kumar Metya has been working at CSIR- NML, Jamshedpur (India) as Principal Scientist. He obtained his B.E. (Mechanical) from Jalpaiguri Government Engineering College, West-Bengal (India); M.Tech in Materials Engineering from BESU, Shibpur (Currently IIEST, Shibpur) Shibpur, Howrah (India) and PhD from Indian Institute of Technology Madras, Chennai (India). His major research interests include Ultrasonic NDE, acoustic wave propagation through materials, mechanical behaviour of materials. He has published 16 papers in International Journals. Dr. Metya received NDT Young Scientist/ Engineer Award in 2011 from Indian Society for Nondestructive Testing.

Dr. Avijit Mondal is currently working as Senior Manager at NETRA, India. He obtained his B.E and M. Tech from Jadavpur University, Kolkata (India) and Ph.D. from the Indian Institute of Technology, Kanpur (India). His major research area includes structure properties correlation, advanced NDE methods for condition assessment, failure analysis of power plant components etc. Before joining NTPC, he was working as visiting Research Scholar at the Pennsylvania State University, USA. He was awarded Shunsaku Katoh Award for most significant contributions to scientific research in the field of Microwave and RF power at the 1^st Global Congress on Microwave Energy Applications (GCEMA 2008), Japan. He was selected as one of the two participants from IIT Kanpur for SAARC-JENESYS 2009 Program by the Japanese Government. He has authored about 32 publications in international journals, conference proceedings and books. He has filed 2 patents and 2 copyrights.

Dr. Ashis Kumar Panda is working as Senior Principal Scientist in the Functional Materials (FM) group of Advanced Materials & Processes (AMP) Division of National Metallurgical laboratory, Jamshedpur (India). He obtained his Ph.D degree in Materials Science from IndianInstitute of Technology, Kharagpur (India) in the year 2002. His research interest is in the development of magnetic alloys (nanostructured, ferromagnetic shape memory, magnetocaloric) through rapid solidification, non- destructive evaluation through magnetic techniques and development of magnetic sensors. He has research experience in Slovak Academy of Science (SAS), Bratislava, Slovakia and National Institute of Materials Science (NIMS), Tsukuba, Japan under Indian National Science Academy (INSA) visiting program and CSIR-Raman Research fellowship respectively. He has about 96 publications in SCI journals and has filed 18 patents.

Dr. M. Ghosh is at present Senior Principal Scientist in Microstructural Engineering Group of Materials Engineering Division, CSIR-National Metallurgical Laboratory, Jamshedpur 831007 (India). After completing B. E. in Metallurgy from Bengal Engineering College, Shibpur, Howrah 711103 (India) and M. E. in Physical Metallurgy fromBE College (Deemed University), Howrah 711103 (India), he obtained his Ph.D in Engineering from BESU, Howrah 711103 (India). Dr. Ghosh was awarded with Indo-US Fellowship in the year of 2009 for post-doctoral research in abroad on advanced joining protocols. He has more than seventeen years of experience in research and development with a major thrust in the area of structure- property co-relation of metallic materials, transmission electron microscopy, solid state joining and failure investigation of engineering components. He has published more than 115 papers in the journals of international repute along with 15 conference proceedings.

Mr. Satish Chand is currently working as Manager at NTPC Energy Technology Research Alliance (NETRA), India. He obtained his M.Sc. (Physics) from Meerut University (India). He has more than 25 years of experience in the field of health and life assessment of power plant components. His major research area includes developing procedures and methodologies for NDE inspection of power plant components, failure investigation, providing new and innovative solutions. He has published more than 15 papers in in-house journal and in international conferences. He has filed 2 patents and 2 copyrights.

Dr. Sarmishtha Palit Sagar obtained her Master of Technology degree in Electronics and Communication Engineering from University of Calcutta, Kolkata, India in 1993 and her PhD from Jadavpur University, Kolkata, India in 2003. She completed her post-doctoral studies at Fraunhofer Institute for Non-Destructive Testing (IzFP), Saarbreucken, Germany & Pennsylvania State University, USA. She currently holds the position of Chief Scientist & Group Leader, NDE group in CSIR-National Metallurgical Laboratory, Jamshedpur, India. She has published 60 SCI/non SCI journal papers, 13 patents and 06 copyrights. Her current research interest includes, Non-Destructive Evaluation using Ultrasonic, Thermography and Advanced Ultrasonic, Sensor & devices for industrial applications, Signal analysis, Internet of Things (IoT) and Artificial Intelligence (AI). She is an editorial board member of the Journal of Non-destructive Evaluation. Dr. Palit Sagar received “National NDT Award in R&D” in 2005, “National NDT award for international recognition” in 2017 and inducted as Honorary fellow of Indian Society for Non-destructive Testing (ISNT).

Dr. Swapan Kumar Das, Ex-Senior Principal Scientist of CSIR-National Metallurgical Laboratory, and Professor of AcSIR was superannuated in February, 2020 after 30 years of service. He obtained his M. Engg and PhD in Metallurgical & Materials Engineering from IIEST, Shibpur, Howrah 711103 (India). His areas of specialization are- Physical Metallurgy, Materials Characterization and Failure Analysis. He has published more than 100 papers in reputed SCI journals.

Mr. Amit Chhabra is currently Senior Manager at the Mechanical Section, NTPC Khargone (India). Earlier, he worked in NDE, Life Management Laboratory at NTPC Energy Technology Research Alliance (NETRA, R&D wing of NTPC). He obtained his B.Tech. (Mechanical) from National Institute of Technology, Jaipur (India). His major work areas at NETRA includes developing procedures and methodologies for NDE inspection of power plant components, failure investigation, providing new and innovative solutions. He has published more than 10 papers in in-house journal and in international conferences. He has filed 2 patents and 2 copyrights.

Dr. Swaminathan Jaganathan is currently working in the position of Chief Scientist at Creep Lab., CSIR-National Metallurgical Laboratory, Jamshedpur (India). He has 28 years research experiences on creep deformation of high temperature alloys. His research interests are remaining life assessment of hightemperature components and failure analysis of industrial steel components. He has published about 35 nos. research papers in various reputed journals.

Prof. Amitava Mitra is currently Visiting Professor at Department of Physics and Professor In-charge (Infrastructure), Indian Institute of Technology Jodhpur, Rajasthan (India). He did his Ph.D. from Indian Institute of Technology, Kharagpur (India) and worked about 30years at CSIR-National Metallurgical Laboratory, Jamshedpur (India). His major areas of research interest include Magnetism & Magnetic Materials and their applications in the field of structural integrity assessment of engineering components. He published more than 150 papers in SCI journals and filed about 15 patents in India and abroad. He is the recipient of National Metallurgist Day Award: Metallurgist of the year-2006 conferred by Ministry of Steel, Government of India for his contributions in the field of Metal Science. He is also the recipient of National NDT award in the year 1997 for R&D and in the year 2000 for system development which were conferred by Indian Society for NDT. He received the Materials Research Society of India Medal in the year 2011. He is an USAID Fellow and worked at Ames Laboratory, Iowa state University, USA and also a JSPS invitation Fellow and worked at Institute of Materials Research, Tohoku University, Sendai, Japan and Iwate University, Morioka, Japan. He is a Fellow of Indian Institute of Metals, Institute of Engineers (India) and Indian Society for NDT.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Online Handel nur mit Neub�chern

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

Moluna GmbH
Engberdingdamm 27, Greven, 48268, Germany

Condiciones de venta y env�o

Condiciones de venta

Informe de revocaci�n/ Modelo de formulario de revocaci�n/
Condiciones Generales de Contrataci�n e informaciones del cliente / Protecci�n de los datos personales

Derecho de revocaci�n para el consumidor
(Se entiende por "consumidor" cualquier persona natural que celebre un negocio jur�dico con fines que no puedan atribuirse ni a su actividad comercial ni a su actividad profesional particular.)

Informaci�n sobre el derecho de revocaci�n

Derecho de revocaci�n
Tiene derecho a revocar el presente co...

M�s informaci�n

Derecho a cancelaci�n

Informe de revocaci�n/ Modelo de formulario de revocaci�n/
Condiciones Generales de Contrataci�n e informaciones del cliente / Protecci�n de los datos personales

Informaci�n sobre el derecho de revocaci�n

Derecho de revocaci�n
Tiene derecho a revocar el presente contrato dentro de un plazo de un mes sin necesidad de alegar ning�n motivo.
El plazo de revocaci�n es de un mes contado a partir del d�a

en el que usted o una tercera persona designada por usted (que no sea el transportista) tome posesi�n de las mercanc�as, siempre que usted haya solicitado una o varias mercanc�as dentro del marco de un pedido com�n y este se suministre en conjunto;
en el que usted o una tercera persona designada por usted (que no sea el transportista) tome posesi�n de la �ltima mercanc�a, siempre que usted haya solicitado varias mercanc�as dentro del marco de un pedido com�n y este se suministre por separado;
en el que usted o una tercera persona designada por usted (que no sea el transportista) tome posesi�n del �ltimo env�o parcial o de la �ltima unidad, siempre que usted haya solicitado una mercanc�a que deba ser suministrada en varios env�os parciales o unidades;

Para ejercer su derecho de revocaci�n, deber� informarnos (Moluna GmbH, M�nsterstr. 105, 48268 Greven, n�mero de tel�fono: 02571/5 69 89 33, N� telefax: 02571/5 69 89 30, Direcci�n de E-Mail: abe@moluna.de) sobre su decisi�n de revocar este contrato a trav�s de una declaraci�n un�voca (p. ej., una carta enviada por correo postal, un telefax o un correo electr�nico). Para ello, puede utilizar el modelo de formulario de revocaci�n adjunto, aunque no es obligatorio.

Para salvaguardar el plazo de revocaci�n es suficiente con el env�o de la notificaci�n sobre el uso del derecho de revocaci�n antes de que expire el plazo de revocaci�n.

Consecuencias de la revocaci�n

En caso de que revoque este contrato, estaremos obligados a reembolsarle todos los pagos que hayamos recibido de su parte, incluyendo los costes de entrega (a excepci�n de los costes adicionales que se deriven en caso de que usted opte por otra modalidad de suministro diferente a la modalidad de suministro est�ndar m�s econ�mica ofrecida por nosotros) con car�cter inmediato y como m�ximo dentro de un plazo de 14 d�as contados a partir del d�a de la recepci�n de la notificaci�n sobre su revocaci�n del presente contrato en nuestras dependencias. Para efectuar dicho reembolso, utilizaremos la misma modalidad de pago que utiliz� usted al efectuar la transacci�n original, a no ser que se haya acordado algo diferente expresamente con usted. En ning�n caso se le abonar� ninguna contraprestaci�n con motivo de dicho reembolso.

Nosotros podremos negarnos a efectuar el reembolso hasta que hayamos recuperado de nuevo las mercanc�as o hasta que nos demuestre mediante un comprobante que nos ha enviado las mercanc�as, lo cual depender� del hecho que se produzca antes.

Usted est� obligado a enviarnos de vuelta o entregarnos las mercanc�as de inmediato y, en cualquier caso, como m�ximo dentro de un periodo de 14 d�as contados a partir del d�a en el que nos informe de la revocaci�n del presente contrato, lo cual tendr� lugar en nuestra direcci�n . El plazo quedar� salvaguardado si efect�a el env�o de las mercanc�as antes de que expire el plazo de 14 d�as.

Usted asumir� los costes directos de la devoluci�n de las mercanc�as.

Usted solo deber� responder en caso de depreciaci�n de las mercanc�as cuando dicha depreciaci�n se atribuya a una manipulaci�n no necesaria para la comprobaci�n de la naturaleza, las propiedades y el funcionamiento de las mercanc�as.

Motivos de exclusi�n y de extinci�n

El derecho de revocaci�n no tendr� validez en caso de contratos:

relacionados con el suministro de mercanc�as que no hayan sido prefabricadas y para cuya fabricaci�n sea determinante una selecci�n o definici�n individual por parte del consumidor, o bien que hayan sido concebidas un�vocamente en base a las necesidades personales del consumidor
relacionados con el suministro de mercanc�as que pueden corromperse r�pidamente o cuya fecha de caducidad podr�a sobrepasarse r�pidamente
relacionados con el suministro de bebidas alcoh�licas cuyo precio haya sido acordado en el momento de la celebraci�n del contrato, pero que no puedan ser suministradas antes de los 30 d�as siguientes a la fecha de celebraci�n del contrato y cuyo valor actual dependa de las fluctuaciones del mercado, sobre lo cual el empresario no tiene ninguna influencia
relacionados con el suministro de peri�dicos, revistas o revistas ilustradas, a excepci�n de contratos de suscripci�n.

El derecho de revocaci�n se extinguir� de forma anticipada en caso de contratos:

relacionados con el suministro de mercanc�as precintadas que no sean apropiadas para ser devueltas por motivos de protecci�n de la salud o de higiene cuando su precinto haya sido retirado tras el suministro
relacionados con el suministro de mercanc�as que, debido a su naturaleza, hayan sido mezcladas de forma inseparable con otras mercanc�as tras el suministro
relacionados con suministros de grabaciones de sonido o v�deo o software inform�tico en un embalaje precintado si dicho precinto ha sido retirado tras el suministro.

Modelo de formulario de revocaci�n

(Si desea revocar el contrato, rellene este formulario y env�enoslo.)

A Moluna GmbH, Engberdingdamm 27, 48268 Greven, n� telefax: 02571/5 69 89 30, direcci�n de e-Mail: abe@moluna.de :
Por la presente, revoco/revocamos () el contrato firmado por m�/por nosotros () sobre la compra de las siguientes mercanc�as ()/
la prestaci�n de los siguientes servicios ()
Fecha del pedido ()/ de la recepci�n ()
Nombre del consumidor/de los consumidores
Direcci�n del consumidor/de los consumidores
Firma del consumidor/de los consumidores (solo en caso de notificaci�n en papel)
Fecha

(*) Tachar lo que no proceda.

Condiciones de env�o

II. Kundeninformationen

Identit�t des Verk�ufers

Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de

Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.

Informationen zum Zustandekommen des Vertrages

Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturm�glichkeiten erfolgen nach Ma�gabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Gesch�ftsbedingungen (Teil I.).

Vertragssprache, Vertragstextspeicherung

3.1. Vertragssprache ist deutsch .

3.2. Der vollst�ndige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung k�nnen die Vertragsdaten �ber die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzvertr�gen und die Allgemeinen Gesch�ftsbedingungen nochmals per E-Mail an Sie �bersandt.

Wesentliche Merkmale der Ware oder Dienstleistung

Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.

Preise und Zahlungsmodalit�ten

5.1. Die in den jeweiligen Angeboten angef�hrten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschlie�lich aller anfallenden Steuern.

5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind �ber eine entsprechend bezeichnete Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zus�tzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.

5.3. Die Ihnen zur Verf�gung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot ausgewiesen.

5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsanspr�che aus dem geschlossenen Vertrag sofort zur Zahlung f�llig.

Lieferbedingungen

6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschr�nkungen finden sich unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot.

Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfl�che keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).

6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zuf�lligen Untergangs und der zuf�lligen Verschlechterung der verkauften Sache w�hrend der Versendung erst mit der �bergabe der Ware an Sie �bergeht, unabh�ngig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenst�ndig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausf�hrung der Versendung bestimmte Person beauftragt haben.

Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.

Gesetzliches M�ngelhaftungsrecht

Die M�ngelhaftung richtet sich nach der Regelung "Gew�hrleistung" in unseren Allgemeinen Gesch�ftsbedingungen (Teil I).

letzte Aktualisierung: 23.10.2019

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 26 a 60 d�as h�biles	De 26 a 60 d�as h�biles
Primer art�culo	EUR 48.99	EUR 48.99

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor