Sinopsis
Through a long term research in education [01-09], the authors incorporate in this book all the information needed for an effective microcontroller-based tutoring system, which is particularly suitable for readers with insufficient background on hardware design issues. In addition, the book addresses a pedagogy that draws readers' attention to the parallelism between assembly-level programming for microcontrollers and higher-level programming (a particularly helpful guide for those who might have previous experience on high-level programming). The book provides a comprehensive guide on the subject of microcomputer architecture teaching and learning and it is designed for a variety of engineering disciplines, such as Electrical Engineering, Electronic Engineering, Automation Engineering, Computer Engineering, and all engineering disciplines that have specific requirements for the design and development of microcontroller-based applications. Apart from the academic community, the book is designed to support self-study training, appropriate for professional engineers. Additional material of the book is available for educators and learners on the website: http://electronics.physics.auth.gr/microcon/ [01] D. E. Bolanakis, E. Glavas, G. A. Evangelakis, K. T. Kotsis, and T. Laopoulos, “Documenting Knowledge to the Undergraduate Education of Professional Engineers: A case Study in Microcontroller Education”, in Proc. of the 40th Annual Conference of the European Society for Engineering Education (SEFI 2012), 23-23 September 2012, Thessaloniki, Greece, pp. 1-7. [02] D. E. Bolanakis, G. A. Evangelakis, E. Glavas and K. T. Kotsis, “A Teaching Approach for Bridging the Gap between Low-level and Higher-level Programming using Assembly Language Learning for Small Microcontrollers”, Computer Application in Engineering Education, Vol. 19, Issue 3, pp. 525-537 (2011). [03] D. E. Bolanakis, K. T. Kotsis and T. Laopoulos, “Switching from Computer to Microcomputer Architecture Education”, European Journal of Engineering Education, Vol. 35, Issue 1, pp. 91-98 (2010). [04] D. E. Bolanakis, K. T. Kotsis and T. Laopoulos, “Arithmetic Operations in Assembly Language: Educators’ Perspective on Endianness Learning using 8-bit Microcontrollers”, IEEE 5th International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS'2009), 21-23 September 2009, Rende, Italy, pp. 600-604. [05] D. E. Bolanakis, K. T. Kotsis and T. Laopoulos, “Teaching Concepts in Microcontroller Education: CISC vs RISC assembly-level programming”, in Proc. of the International Conference on Information Communication Technologies in Education (ICICTE 2009), 9-11 July 2009, Corfu, Greece, pp. 742-750. [06] D. E. Bolanakis, G. A. Evangelakis, E. Glavas and K. T. Kotsis, “Teaching the Addressing Modes of the M68HC08 CPU by Means of a Practicable Lesson”, in Proc. of the 11th IASTED International Conference on Computers and Advance Technology in Education (CATE 2008), 29 September–1 October 2008, Crete, Greece, pp. 446-450. [07] D. E. Bolanakis, E. Glavas, and G. A. Evangelakis, “An integrated microcontroller-based tutoring for computer architecture laboratory course”, International Journal of Engineering Education. Vol. 23, No. 4, pp. 785-798 (2007). [08] D. E. Bolanakis, E. Glavas, and G. A. Evangelakis, “Levin’s approach for microcontrollers tutoring”, in Proc. American Society for Engineering Education Global Colloquium on Engineering Education, Istanbul, Turkey, 2007, pp. 1-11. [09] D. E. Bolanakis, E. Glavas, G. A. Evangelakis, “A multidisciplinary educational board system for microcontrollers: considerations in design for technically accurate custom-made platforms”, in Proc. International Symposium on Information Technologies and Applications in Education, Kunming, P. R. China, 2007, pp 391-395.
Reseña del editor
Through a long term research in education [01-09], the authors incorporate in this book all the information needed for an effective microcontroller-based tutoring system, which is particularly suitable for readers with insufficient background on hardware design issues. In addition, the book addresses a pedagogy that draws readers' attention to the parallelism between assembly-level programming for microcontrollers and higher-level programming (a particularly helpful guide for those who might have previous experience on high-level programming). The book provides a comprehensive guide on the subject of microcomputer architecture teaching and learning and it is designed for a variety of engineering disciplines, such as Electrical Engineering, Electronic Engineering, Automation Engineering, Computer Engineering, and all engineering disciplines that have specific requirements for the design and development of microcontroller-based applications. Apart from the academic community, the book is designed to support self-study training, appropriate for professional engineers. Additional material of the book is available for educators and learners on the website: http://electronics.physics.auth.gr/microcon/ [01] D. E. Bolanakis, E. Glavas, G. A. Evangelakis, K. T. Kotsis, and T. Laopoulos, “Documenting Knowledge to the Undergraduate Education of Professional Engineers: A case Study in Microcontroller Education”, in Proc. of the 40th Annual Conference of the European Society for Engineering Education (SEFI 2012), 23-23 September 2012, Thessaloniki, Greece, pp. 1-7. [02] D. E. Bolanakis, G. A. Evangelakis, E. Glavas and K. T. Kotsis, “A Teaching Approach for Bridging the Gap between Low-level and Higher-level Programming using Assembly Language Learning for Small Microcontrollers”, Computer Application in Engineering Education, Vol. 19, Issue 3, pp. 525-537 (2011). [03] D. E. Bolanakis, K. T. Kotsis and T. Laopoulos, “Switching from Computer to Microcomputer Architecture Education”, European Journal of Engineering Education, Vol. 35, Issue 1, pp. 91-98 (2010). [04] D. E. Bolanakis, K. T. Kotsis and T. Laopoulos, “Arithmetic Operations in Assembly Language: Educators’ Perspective on Endianness Learning using 8-bit Microcontrollers”, IEEE 5th International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS'2009), 21-23 September 2009, Rende, Italy, pp. 600-604. [05] D. E. Bolanakis, K. T. Kotsis and T. Laopoulos, “Teaching Concepts in Microcontroller Education: CISC vs RISC assembly-level programming”, in Proc. of the International Conference on Information Communication Technologies in Education (ICICTE 2009), 9-11 July 2009, Corfu, Greece, pp. 742-750. [06] D. E. Bolanakis, G. A. Evangelakis, E. Glavas and K. T. Kotsis, “Teaching the Addressing Modes of the M68HC08 CPU by Means of a Practicable Lesson”, in Proc. of the 11th IASTED International Conference on Computers and Advance Technology in Education (CATE 2008), 29 September–1 October 2008, Crete, Greece, pp. 446-450. [07] D. E. Bolanakis, E. Glavas, and G. A. Evangelakis, “An integrated microcontroller-based tutoring for computer architecture laboratory course”, International Journal of Engineering Education. Vol. 23, No. 4, pp. 785-798 (2007). [08] D. E. Bolanakis, E. Glavas, and G. A. Evangelakis, “Levin’s approach for microcontrollers tutoring”, in Proc. American Society for Engineering Education Global Colloquium on Engineering Education, Istanbul, Turkey, 2007, pp. 1-11. [09] D. E. Bolanakis, E. Glavas, G. A. Evangelakis, “A multidisciplinary educational board system for microcontrollers: considerations in design for technically accurate custom-made platforms”, in Proc. International Symposium on Information Technologies and Applications in Education, Kunming, P. R. China, 2007, pp 391-395.
"Sobre este título" puede pertenecer a otra edición de este libro.
