Mechanics of Heterogeneous Materials (Advanced Structured Materials, 195)
Idioma: inglés
Editorial: Springer, 2023
- Tapa dura
- Nuevo

Librería: Mispah books, Redhill, Surrey, Reino UnidoMispah books
Vendedor de AbeBooks desde 15 de abril de 2021
Condición: Nuevo
EUR 473,14
Cantidad disponible: 1 disponibles
Añadir al carritoDescripción del artículo del vendedor
N° de ref. del artículo ERICA82930312874366
- Título
- Mechanics of Heterogeneous Materials (Advanced Structured Materials, 195)
- Editorial
- Springer
- Año de publicación
- 2023
- Estado
- New
- Tipo de libro
- book
- Encuadernación
- hardcover
- Idioma
- inglés
- ISBN 10
- 3031287436
- ISBN 13
- 9783031287435
This book is published on dedication of Prof. Dr. Igor Sevostianov who passed away in 2021. He was a great Russian-American scientist who made significant contributions in the field of mechanics of heterogeneous media. This book contains research papers from his friends and colleagues in this research field.
“Sinopsis” puede pertenecer a otra edición de este título.
Acerca del autor
Prof. Dr.-Ing.habil. Dr.h.c.mult. Holm Altenbach is a member of the International Association of Applied Mathematics and Mechanics and the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy. He has held positions at the Otto-von-Guericke-Universität Magdeburg and Martin-Luther-Universität Halle-Wittenberg, both in Germany. He graduated from Leningrad Polytechnic Institute in 1985 (diploma in Dynamics and Strength of Machines) and was awarded his Ph.D. degree in 1983 and his Doctor of Technical Sciences degree in 1987 at the same institute. He is currently a full professor of Engineering Mechanics at the Otto-von-Guericke-Universität Magdeburg, Faculty of Mechanical Engineering, Institute of Mechanics (since 2011), where he has been the acting director since 2015. His areas of scientific interest include general theory of elastic and inelastic plates and shells, creep and damage mechanics, strength theories, and nano- and micromechanics.
Victor A. Eremeyev, Ph.D., Dr. hab., is Associate Professor at University of Cagliari. His research focuses on continuum and structural mechanics, including the following topics: nonlinear elasticity, generalized continua (micropolar, micromorphic, stress- and strain- gradient media), metamaterials, surface elasticity, plates and shells, nano- and micromechanics, piezo- and flexoelectricity, flexomagneticity, and surface waves. He graduated from the Department of Mechanics and Applied Mathematics at the Rostov State University (Rostov on Don, Russia) in 1985. In 1990, he received a PhD degree from the same university; he also holds a doctor of science degree from 2004, at the Institute of Problems of Mechanical Engineering of Russian Academy of Science (St. Petersburg, Russia). He was appointed as assistant, associate and full professor at Rostov State University/South Federal University (1988–2017). Later, he worked as a researcher at Martin Luther University Halle-Wittenberg (2010–2011) and Otto-von-Guericke-University Magdeburg (2012–2015), Germany, as associate professor at Rzeszow University of Technology, Rzeszow (2015–2017), and as a full ´ professor at Gdansk University of Technology, Poland (2017–2021). In 2020, he joined the University of Cagliari, Italy.
Mikhail Yu. Gutkin, Ph.D. (1990), Dr. Sci. Habil. (1998), is the Chief Researcher and Head of the Lab of Nanomaterials Mechanics and Theory of Defects at the Institute of Problems of Mechanical Engineering, Russian Academy of Sciences (St. Petersburg, Russia); Professor at the Institute of Advances Data Transfer Systems, ITMO University; Professor at the Higher School of Mechanics and Control Processes, Peter the Great St. Petersburg Polytechnic University. Areas of expertise are the Theory of defects in solids; Physics and mechanics of photonics structures; Micromechanics of plastic deformation and fracture of nanostructural materials; Defect structures in growing hexagonal crystals; Description of defects using gradient and surface elasticity theory; Boundary problems of elasticity theory for defects in finite and elastically heterogeneous structures. Graduated from the Peter the Great St. Petersburg Polytechnic University (former Leningrad Polytechnic Institute called after M.I. Kalinin) in 1985.
Post-graduate at the Ioffe Physico-Technical Institute, Russian Academy of Sciences (1986-1990). Engineer, Junior Researcher, Researcher – Leader of research group at the Central Research Institute of Materials (St. Petersburg, 1985-1991). Researcher, Senior Researcher, Leading Researcher, Chief Researcher, Chief Researcher and Head of Lab (1991-to date) at the Institute of Problems of Mechanical Engineering, Russian Academy of Sciences (St. Petersburg). Professor at the Chair of the Physics of the Strength and Plasticity of Materials, St. Petersburg State Polytechnical University (2005-2012) and at the Chair (Higher School since2019) of Mechanics and Control Processes, Peter the Great St. Petersburg Polytechnic University (2013-to date). Professor at the Department of modern functional materials, Faculty of Engineering and Physics (2014-2015), Department of Light Technologies and Optoelectronics (2015-2018), Faculty of Laser Photonics and Optoelectronics (2018-2019), Institute of Advances Data Transfer Systems (2019-to date), ITMO University (St. Petersburg). Leading Researcher at the Faculty of Mathematics and Mechanics, St. Petersburg State University (2012-2013). Leading Researcher at LLC “Optogan New Technologies of Light” (St. Petersburg, 2012-2013). Visiting Researcher at the Research Group on Mechanics of Heterogeneous Solids, Max-Planck-Society, Dresden, Germany (1995); the Mechanics and Mechanical Engineering Department, Michigan Technological University, Houghton, MI, USA (1996); the Laboratory of Mechanics and Materials, Polytechnic School, Aristotle University of Thessaloniki, Greece (1998, 1999);the Institute of Physical Metallurgy, Freiberg University of Mining and Technology, Freiberg, Germany (1999, 2001). Senior Research Associate at the School of Mechanical Engineering, University of Natal, Durban, South Africa (2000-2001).
Wolfgang H. Müller, Dr. rer. nat. (1986), Habil. (1998), is Full Professor of Continuum Mechanics and Cosntitutive Theory at the Technische Universität Berlin since 2001. Formelly he was full Professor of Mechanical Engineering at Heriot-Watt University in Edinburgh. His area of expertise is in continuum physics.
“Acerca de” puede pertenecer a otra edición de este título.
Mispah books
Redhill, Surrey, Reino Unido
Vendedor de AbeBooks desde 15 de abril de 2021
Tarifas de envío de Reino Unido a Estados Unidos de America
| Artículo | De 14 a 15 días hábiles | De 9 a 10 días hábiles |
|---|---|---|
| Primer artículo | EUR 29,15 | EUR 31,48 |
Métodos de pago
Descripción de la tienda
Especialidad
Fiction & Academic Books, Science, GeneralInformación empresarial del vendedor
Mispah books
Reino Unido
Condiciones de venta
We offer excellent customer service & easy return facility.
we ship from Multiple location,UK,India,US
Return address:
Mispah books
flat4 ,
Centenary court, 30 Warwick Road
Redhill , SURRE RH1 1FQ
United Kingdom
Derecho al desistimiento
Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona física que actúe con fines ajenos a su actividad comercial, empresarial, oficio o profesión.
Información sobre el derecho de desistimiento
Derecho legal de desistimiento
Tiene derecho a rescindir este contrato en un plazo de 14 días sin dar ningún motivo.
El periodo de desistimiento vencerá a los 14 días desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesión física del último bien o del último lote o pieza.
Para ejercer el derecho de desistimiento, complete de forma electrónica y envíe una declaración clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a través de un soporte duradero (por ejemplo, por correo electrónico).
Para cumplir con el plazo de desistimiento, basta con que envíe su comunicación relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.
Efectos del desistimiento
Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de envío (excepto los gastos adicionales que surjan si elige un tipo de envío que no sea el tipo de envío estándar más económico que ofrecemos).
Podemos hacer una deducción del reembolso por la pérdida de valor de cualquier bien suministrado, si la pérdida es el resultado de una manipulación innecesaria por su parte.
Efectuaremos el reembolso sin demoras indebidas y, a más tardar, 14 días después de que se nos informe de su decisión de rescindir este contrato.
Efectuaremos el reembolso utilizando el mismo medio de pago que utilizó para la transacción inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrirá en ningún cargo como resultado de dicho reembolso.
Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.
Deberá devolver los bienes o entregarlos a Mispah books, Redhill, Surrey, United Kingdom, sin demoras indebidas y, en cualquier caso, en un plazo máximo de 14 días a partir del día en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercancía antes de que venza el periodo de 14 días. Tendrá que asumir los gastos directos de devolución de los bienes. Usted solo es responsable de la disminución del valor de los bienes como resultado de una manipulación distinta a la necesaria para establecer la naturaleza, las características y el funcionamiento de los bienes.
Excepciones al derecho de desistimiento
El derecho de desistimiento no se aplica a lo siguiente:
- La entrega de periódicos, diarios o revistas, con la excepción de los contratos de suscripción; y
- El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, aceptó que podíamos empezar a entregarlo y que no podría desistir una vez iniciada la entrega.