This book describes load modeling approaches for complex work pieces and batch forgings, and demonstrates analytical modeling and data-driven modeling approaches for known and unknown complex forging processes. It overcomes the current shortcomings of modeling, analysis and control approaches, presenting contributions in three major areas: In the first, several novel modeling approaches are proposed: a process/shape-decomposition modeling method to help estimate the deformation force; an online probabilistic learning machine for the modeling of batch forging processes; and several data-driven identification and modeling approaches for unknown forging processes under different work conditions. The second area develops model-based dynamic analysis methods to derive the conditions of stability and creep. Lastly, several novel intelligent control methods are proposed for complex forging processes.One of the most serious problems in forging forming involves the inaccurate forging conditions, velocity and position offered by the hydraulic actuator due to the complexity of both the deformation process of the metal work piece and the motion process of the hydraulic actuator. The book summarizes the current weaknesses of modeling, analysis and control approaches. are summarized as follows: a) With the current modeling approaches it is difficult to model complex forging processes with unknown parameters, as they only model the dynamics in local working areas but do not effectively model unknown nonlinear systems across multiple working areas; further, they do not take the batch forging process into account, let alone its distribution modeling. b) All previous dynamic analysis studies simplify the forging system to having a single-frequency pressure fluctuation and neglect the influences of non-linear load force. Further, they fail to take the flow equation in both valves and cylinders into account. c) Conventional control approaches only consider the linear deformation force and pay no attention to sudden changes and the motion synchronization for the multi-cylinder system, making them less effective for complex, nonlinear time-varying forging processes subject to sudden changes.

“Sinopsis” puede pertenecer a otra edición de este título.

Acerca del autor

XinJiang Lu received the B.E. and M.E. degrees in the School of Mechanical & Electrical Engineering, Central South University, China, and the Ph.D degree in the Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong. Currently, he is currently a Professor of the School of Mechanical & Electrical Engineering, Central South University.

Dr. Lu has broad interest in academic as well as applied research. He has published 1 book with John Wiley & Sons in 2014, and published over 30 SCI journal papers and more than 20 conference papers. As PI, he has taken charge of 8 projects. His current research interests are in modeling and control of hydraulic actuator, data learning, process modeling and control, robust design, integration of design and control.

Dr. Lu serves as one of the Editorial Board Members in both International Journal of Industrial and Manufacturing Systems Engineering and International Journal of Computer& Software Engineering. He was awarded New Century Excellent Talents award by the Chinese Ministry of Education in 2013, Hiwin Doctoral Dissertation Award in 2011, Excellent Thesis Award for Master’s Degree of both Hunan Province and Central South University respectively in 2007 and 2006. He is a member of IEEE.

The list of the selected publications:

[1] Lu X.J., Zou W., Huang M.H., A Novel Spatiotemporal LS-SVM Method for Complex Distributed Parameter Systems with Applications to Curing Thermal Process, IEEE Transactions on Industrial Informatics, 12(3), pp.1156 - 1165, 2016.

[2] Fan B., Lu X.J^*., Huang M.H., A Novel LS-SVM Control for Unknown Nonlinear Systems with Application to Complex Forging Process, Journal of Central South University, 2016 (Accepted)

[3] Fan B., Lu X.J*., Li H.X., Probabilistic Inference based Least Squares Support Vector Machine for Modeling under Noisy Environment,IEEE Trans. Systems, Man, and Cybernetics: Systems, 10.1109/TSMC.2016.2531674, 2016. (Accepted)

[4] Zhou C., Lu X.J^*.,Huang M.H., Dempster-Shafer theory-based robust least squares support vector machine for stochastic modelling, Neurocomputing, 182, pp.145-153i 2016.

[5] Lu X.J., Zhou C., Huang M.H., Lv W.B. Regularized online sequential extreme learning machine with adaptive regulation factor for time-varying nonlinear system, Neurocomputing, 174,pp.617-626, 2016.

[6] Lu X.J., Liu C., Huang M.H. Online Probabilistic Extreme Learning Machine for Distribution Modeling of Complex Batch Forging Processes, IEEE Transactions on Industrial Informatics, 11(6), pp.1277-1286, 2015.

[7] Lu X.J., Zou W., Huang M.H. An adaptive modeling method for time-varying distributed parameter processes with curing process applications, Nonlinear Dynamics, 82(1), pp. 865-876, 2015。

[8] Lu X.J., Fan B., Huang, M.H. (2015). A Novel LS-SVM Modeling Method for a Hydraulic Press Forging Process with Multiple Localized Solutions, IEEE Transactions on Industrial Informatics, 11(3), pp. 663-670, 2015.

[9] Lu X.J., Zou W., Huang M.H., Deng K. (2015). A process/shape-decomposition modeling method for deformation force estimation in complex forging processes, International Journal of Mechanical Sciences, 90, pp.190-199, 2015.

[10] Lu X.J., Huang M.H. (2015). Two-Level Modeling Based Intelligent Integration Control for Time-Varying Forging Processes, Industrial and engineering chemistry research, 54, pp.5690-5696, 2015.

[11] Lu X.J., Huang M.H., (2015). A Novel Multi-level Modeling Method for Complex Forging Processes on Hydraulic Press Machines, International Journal of Advanced Manufacturing Technology,79(9), pp.1869-1880, 2015.

[12] Lei J., Lu X.J., Li Y.B., Huang M.H., Zou W., (2015). Approximate-model Based Estimation Method for Dynamic Response of Forging Processes, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28(3), pp.565-572, 2015.

[13] Lu X.J., Li H.X., Huang M.H. (2014). Data-Driven Robust Design for a Curing Oven, IEEE Trans. on Components, Packaging and Manufacturing Technology, 4(8), pp. 1366-1373, 2014.

[14] Lu X.J., Li H.X., Huang M.H. (2014). Stability and robust design using a sector nonlinearity approach for nonlinear manufacturing systems, Mechanism and Machine Theory, 82, pp. 115-127, 2014.

[15] Lu X.J., Huang M.H. (2014). A KL/Subspace Modeling Method for Integrated Design and Control in Curing Processes, Industrial and engineering chemistry research, 53, pp. 14377-14384, 2014.

[16] Lu X.J., Huang M.H. (2014). A simple online modeling approach for a time-varying forging process, International Journal of Advanced Manufacturing Technology, 75, pp. 1197-1205, 2014

[17] Lu X.J., Li Y.B., Huang M.H. (2013). Operation-region-decomposition-based SVD/NN Modeling Method for Complex Hydraulic Press Machines, Industrial & Engineering Chemistry Research,52, pp.17221-17228, 2013.

[18] Lu X.J. & Huang, M.H. (2013). Nonlinear-Measurement-Based Integrated Robust Design and Control for Manufacturing System, IEEE Trans. on Industrial Electronics, 60(7), pp.2711-2720, 2013.

[19] Lu X.J. & Huang, M.H. (2013). Multi-domain modeling based robust design for nonlinear manufacture system, International Journal of Mechanical Sciences, 75, pp.80-86, 2013.

[20] Lu X.J. & Huang, M.H. (2012). System decomposition based multi-level control for hydraulic press machine. IEEE Trans. on Industrial Electronics, 59(4), pp. 1080-1087, 2012.

[21] Lu X.J. & Li, H.-X. (2012). Model based probabilistic robust design with data-based uncertainty compensation for model uncertainty. ASME Trans. on Journal of Mechanical Design, 134(2), pp. 021004, 2012.

[22] Lu X.J. & Li, H.-X. (2012). Probabilistic robust design for covariance minimization of nonlinear system. Mechanism and Machine Theory, , 52, pp. 195-205, 2012.

[23] Lu X.J. & Li, H.-X. (2011). Robust Design for Dynamic system under Model Uncertainty. ASME Trans. on Journal of Mechanical Design, 133(2), pp:021006.

[24] Lu X.J. & Huang, M.H. (2011). Subspace modeling based Nonlinear Measurement for Process Design. Industrial & Engineering Chemistry Research , 50, 13457-13465.

[25] Lu X.J. Li, H.-X., & Yuan, X. (2010). PSO-based intelligent integration of design and control for a kind of curing process. Journal of process control, 20, 1116-1125

[26] Lu X.J., Li, H.-X., Chen C. L. (2010). Variable sensitivity based deterministic robust design for nonlinear system. ASME Trans. on Journal of Mechanical Design. 132(6),pp: 064502.

[27] Lu X.J., Li, H.-X., Chen C. L. (2010). Robust Optimal Design with Consideration of Robust Eigenvalue Assignment. Industrial & Engineering Chemistry Research, 49 (7), pp: 3306–3315.

[28] Lu X.J., Li, H.-X.^*, Duan J.-A., Sun D. (2010). Integrated Design and Control under Uncertainty: A Fuzzy Modeling Approach. Industrial & Engineering Chemistry Research. 49(3), pp:1312–1324.

[29] Lu X.J. & Li, H.-X. (2009). Perturbation Theory based Robust Design for Model Uncertainty. ASME Trans. on Journal of Mechanical Design. 131(11), pp:111006.

[30] Lu X.J. & Li, H.-X. (2009). Stability based Robust Eigenvalue Design for Tolerance. ASME Trans. on Journal of Mechanical Design. 131(8), pp: 081007.

MingHui Huang received the B.E., M.E. and Ph.D degrees in the School of Mechanical & Electrical Engineering, Central South University, China.

Currently, he is a full professor of the School of Mechanical & Electrical Engineering, Central South University. He was awarded both “Chang Jiang Scholar” and New Century Excellent Talents award by the Chinese Ministry of Education, China. His research interests include forging forming, machine design and manufacturing, design theory, fault diagnosis, digital manufacturing.

The list of the selected publications:

[1] Lu X.J., Zou W., Huang M.H., A Novel Spatiotemporal LS-SVM Method for Complex Distributed Parameter Systems with Applications to Curing Thermal Process, IEEE Transactions onIndustrial Informatics, 12(3), pp.1156 - 1165, 2016.

[2] lex="" forging="" process,="" journal="" of="" central="" south="" university,="" 2016="" (accepted)

[3] Zhou C., Lu X.J^*.,Huang M.H., Dempster-Shafer theory-based robust least squares support vector machine for stochastic modelling, Neurocomputing, 182, pp.145-153i 2016.

[4] Lu X.J., Zhou C., Huang M.H., Lv W.B. Regularized online sequential extreme learning machine with adaptive regulation factor for time-varying nonlinear system, Neurocomputing, 174,pp.617-626, 2016.

[5] Lu X.J., Liu C., Huang M.H. Online Probabilistic Extreme Learning Machine for Distribution Modeling of Complex Batch Forging Processes, IEEE Transactions on Industrial Informatics, 11(6), pp.1277-1286, 2015.

[6] Lu X.J., Zou W., Huang M.H.^ations, Nonlinear Dynamics, 82(1), pp. 865-876, 2015。

[7] Lu X.J., Fan B., Huang, M.H. (2015). A Novel LS-SVM Modeling Method for a Hydraulic Press Forging Process with Multiple Localized Solutions, IEEE Transactions on Industrial Informatics, 11(3), pp. 663-670, 2015.

[8] Lu X.J., Zou W., Huang M.H., Deng K. (2015). A process/shape-decomposition modeling method for deformation force estimation in complex forging processes, International Journal of Mechanical Sciences, 90, pp.190-199, 2015.

[9] Lu X.J., Huang M.H. (2015). Two-Level Modeling Based Intelligent Integration Control for Time-Varying Forging Processes, Industrial and engineering chemistry research, 54, pp.5690-5696, 2015.

[10] Lu X.J., Huang M.H., (2015). A Novel Multi-level Modeling Method for Complex Forging Processes on Hydraulic Press Machines, International Journal of Advanced Manufacturing Technology,79(9), pp.1869-1880, 2015.

[11] Lei J., Lu X.J., Li Y.B., Huang M.H., Zou W., (2015). Approximate-model Based Estimation Method for Dynamic Response of Forging Processes, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28(3), pp.565-572, 2015.

[12] Lu X.J., Li H.X., Huang M.H. (2014). Data-Driven Robust Design for a Curing Oven, IEEE Trans. on Components, Packaging and Manufacturing Technology, 4(8), pp. 1366-1373, 2014.

[13] Lu X.J., Li H.X., Huang M.H. (2014). Stability and robust design using a sector nonlinearity approach for nonlinear manufacturing systems, Mechanism and Machine Theory, 82, pp. 115-127, 2014.

[14] Lu X.J., Huang M.H. (2014). A KL/Subspace Modeling Method for Integrated Design and Control in Curing Processes, Industrial and engineering chemistry research, 53, pp. 14377-14384, 2014.

[15] Lu X.J., Huang M.H. (2014). A simple online modeling approach for a time-varying forging process, International Journal of Advanced Manufacturing Technology, 75, pp. 1197-1205, 2014

[16] Lu X.J., Li Y.B., Huang M.H. (2013). Operation-region-decomposition-based SVD/NN Modeling Method for Complex Hydraulic Press Machines, Industrial & Engineering Chemistry Research,52, pp.17221-17228, 2013.

[17] Lu X.J. & Huang, M.H. (2013). Nonlinear-Measurement-Based Integrated Robust Design and Control for Manufacturing System, IEEE Trans. on Industrial Electronics, 60(7), pp.2711-2720, 2013.

[18] Lu X.J. & Huang, M.H. (2013). Multi-domain modeling based robust design for nonlinear manufacture system, International Journal of Mechanical Sciences, 75, pp.80-86, 2013.

[19] Lu X.J. & Huang, M.H. (2012). System decomposition based multi-level control for hydraulic press machine. IEEE Trans. on Industrial Electronics, 59(4), pp. 1080-1087, 2012.

“Acerca de” puede pertenecer a otra edición de este título.

Brook Bookstore On Demand

Napoli, NA, Italia

Vendedor de 5 estrellas

Vendedor de AbeBooks desde el 11 de octubre de 2022

Tarifas de envío de Italia a Estados Unidos de America

Artículo	De 25 a 40 días hábiles	De 60 a 60 días hábiles
Primer artículo	EUR 5,50	EUR 511,00

Los plazos de entrega los establecen los vendedores y varían según el transportista y la ubicación. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relación con cargos adicionales para cubrir cualquier aumento en los costes de envío de los artículos.

Métodos de pago

Descripción de la tienda

Account dedicated to Print on Demand titles. Brook Bookstore offers a wide selection of books with a continuously updated catalog and fast shipments all over the world. We hold distribution rights with all of the publishers we promote and are in continuous search of new interesting titles to propose to our customers. We are part of Brandon Group SRL (an Italian company) and all of the orders are shipped from Europe. Depending on availability orders will be picked from our different warehouses. CONTACT US If you have any questions please do not hesitate to contact us sending a message to our store. We have a well prepared customer service team who will be happy to assist you. Our working hours are from Monday to Friday from 9:30 to 18:30 (CET, UTC +1) so messages received during the weekends might be responded with a slight delay but we guarantee you will get back to you as soon as possible. RETURNS If you want to return your order, please submit your request through Abebooks platform. Returns requests are managed case by case by our team and always in line with Abebooks policies: AbeBooks’ Return Policy guarantees that you can return any book for a refund within 30 days, when the return is due to an error on the bookseller’s part. When the motive of the return is not due to an error of the seller it is up to Brook Bookstore to accept the return or else after studying the case. CANCELLATION You can send a cancellation request to our customer service team while the package has not yet been shipped. After that we cannot ensure we can retrieve the parcel but we suggest you to get in touch with us in order to verify the case. INVOICE You can request the invoice to be issued together with the shipment of the order or, at the latest, in the same month of the shipment. …

Especialidad

Print on Demand

Información empresarial del vendedor

Brandon Group S.R.L.

Via Vannella Gaetani 27, Brandon Group
Napoli, NA Italia 80121

Contactar con el vendedorVer los artículos de este vendedorVer la página principal del vendedor

Condiciones de venta

Brook Bookstore On Demand ofrece una amplia selección de libros con un catálogo continuamente actualizado y envíos rápidos a todo el mundo. Tenemos los derechos de distribución con todas las editoriales que promocionamos y estamos en continua búsqueda de nuevos títulos interesantes para proponer a nuestros clientes. Somos parte de Brandon Group SRL (una compañía italiana) y todos los pedidos se envían desde Europa. Dependiendo de la disponibilidad los pedidos se recogerán de nuestros diferentes centros de distribución.

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona física que actúe con fines ajenos a su actividad comercial, empresarial, oficio o profesión.

Información sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 días sin dar ningún motivo.

El periodo de desistimiento vencerá a los 14 días desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesión física del último bien o del último lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electrónica y envíe una declaración clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a través de un soporte duradero (por ejemplo, por correo electrónico).

Para cumplir con el plazo de desistimiento, basta con que envíe su comunicación relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de envío (excepto los gastos adicionales que surjan si elige un tipo de envío que no sea el tipo de envío estándar más económico que ofrecemos).

Podemos hacer una deducción del reembolso por la pérdida de valor de cualquier bien suministrado, si la pérdida es el resultado de una manipulación innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a más tardar, 14 días después de que se nos informe de su decisión de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utilizó para la transacción inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrirá en ningún cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deberá devolver los bienes o entregarlos a Brook Bookstore On Demand, Bristol, United Kingdom, +39 3485885209, sin demoras indebidas y, en cualquier caso, en un plazo máximo de 14 días a partir del día en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercancía antes de que venza el periodo de 14 días. Tendrá que asumir los gastos directos de devolución de los bienes. Usted solo es responsable de la disminución del valor de los bienes como resultado de una manipulación distinta a la necesaria para establecer la naturaleza, las características y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de periódicos, diarios o revistas, con la excepción de los contratos de suscripción; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, aceptó que podíamos empezar a entregarlo y que no podría desistir una vez iniciada la entrega.

Lu:Modeling, Analysis and Control of Hy (eng)

Descripción del artículo del vendedor

Detalles bibliográficos

Sinopsis

Acerca de