Paperback. Electric Discharge Machining (EDM) is an acclaimed non-conventional machining process that is used for machining of hard or geometrically complex and electrically conductive materials which are extremely difficult to machine by conventional methods. One of the foremost demerits of this process is its very low material removal rate (MRR). For this, researchers have proposed some modifications, such as providing rotational motion to the tool or workpiece, mixing of conducting fine powders (such as SiC, Cr, Al, graphite etc.) in the dielectric, providing vibrations to either the tool or the workpiece etc. This book deals with the EDM process enhancement using the adoption of the tool rotation methodology for machining the AISI D3 Tool Steel. The process enhancement method proves to significantly improve the material removal rate and the surface finish of the machined specimen. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

N� de ref. del art�culo 9786202923781

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo

Influence of Tool Rotation on the Output Parameters of the EDM Process (Paperback)

Editor

LAP Lambert Academic Publishing

Fecha de publicaci�n

2024

Idioma

Ingl�s

ISBN 10

6202923784

ISBN 13

9786202923781

Encuadernaci�n

Paperback

Estado

new

Cat�logos de vendedores

Acerca de

Sinopsis

Electric Discharge Machining (EDM) is an acclaimed non-conventional machining process that is used for machining of hard or geometrically complex and electrically conductive materials which are extremely difficult to machine by conventional methods. One of the foremost demerits of this process is its very low material removal rate (MRR). For this, researchers have proposed some modifications, such as providing rotational motion to the tool or workpiece, mixing of conducting fine powders (such as SiC, Cr, Al, graphite etc.) in the dielectric, providing vibrations to either the tool or the workpiece etc. This book deals with the EDM process enhancement using the adoption of the tool rotation methodology for machining the AISI D3 Tool Steel. The process enhancement method proves to significantly improve the material removal rate and the surface finish of the machined specimen.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

The Nile Group Pty Ltd
42 Apex Drive, Truganina, VIC, 3029, Australia

Condiciones de venta y env�o

Condiciones de venta

We guarantee the condition of every book as it's described on the Abebooks web sites. If you're dissatisfied with your purchase (Incorrect Book/Not as Described/Damaged) or if the order hasn't arrived, you're eligible for a refund within 30 days of the estimated delivery date. If you've changed your mind about a book that you've ordered, please use the Ask bookseller a question link to contact us and we'll respond within 2 business days.

Derecho a cancelaci�n

Condiciones de env�o

Please note that titles are dispatched from our UK and NZ warehouse. Delivery times specified in shipping terms. Orders ship within 2 business days. Delivery to your door then takes 8-15 days.

Tarifas de env�o de Australia a Espa�a

Tarifas de env�o de Australia a Espa�a
Cantidad del pedido	De 25 a 60 d�as h�biles	De 8 a 59 d�as h�biles
Primer art�culo	EUR 31.74	EUR 37.75

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.