This book covers advanced 3D printing processes and the latest developments in novel composite-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The rise in ecological anxieties has forced scientists and researchers from all over the world to find novel lightweight materials. Therefore, it is necessary to expand knowledge about the processing, applications, and challenges of 3D printing of composite materials to expanding the range of their application. This book presents an extensive survey on recent improvements in the research and development of additive manufacturing technologies that are used to make composite structures for various applications such as electronic, aerospace, construction, and biomedical applications. Advanced printing techniques including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting will be covered and discussed thoroughly in this book. This book also focuses the recent advances and challenges in polymer nanocomposite and introduces potential applications of these materials in various sectors.

Acerca del autor

Dr. A. Praveen Kumar is presently working as Assistant Professor in the Department of Mechanical Engineering, Easwari Engineering College (A Unit of SRM Group of Institutions), Chennai, Tamilnadu. He acquired distinction in Bachelor’s degree (Mechanical Engineering) and University first rank in Master’s degree (Engineering Design) from Anna University, Chennai. He completed his Ph.D. degree in the area of crashworthiness of thin-walled structures from Anna University, Chennai. He has 5 years of teaching experience and 3 years of research experience. His major areas of research interests include 3D printing of composite parts, metal forming simulation, additive manufacturing, composite materials and structures, impact loading of hybrid tubes, and use of lightweight materials in automotive applications. Dr. A. Praveen Kumar authored a book titled “Mechanical behaviour of hybrid jute/glass polymer composites”– ISBN number: 978-613-9-82605-6 and co-authored a book titled “Development of Labyrinth Type Solar Thermal Energy Storage System”– ISBN number: 978-620-0-11406-8 in Lambert Academic Publishing, Germany. He has edited a book “Advances in Light-weight Materials and structures” for Springer publications. He has published 70 research papers in reputed international journals and presented 10 papers in International/National conferences. He is currently Managing Guest Editor in Materials Today Proceedings (Elsevier), Editorial Board Member in Journal of Transactions on Advancements in Science and Technology, and Reviewer in reputed journals like Journal of Industrial Textiles-Sage Publications, International Journal of Crashworthiness-Taylor and Francis, International Journal of Mechanical Sciences-Elsevier, The Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer. He is also Life Member of various professional bodies including Indian Society of Technical Education (ISTE), Association of Machines and Mechanisms (AMM), International Association of Engineers (IAE), and Indian Society of Mechanical Engineers (ISME).

Dr. Kishor Kumar Sadasivuni is currently working in the Center for Advanced Materials, Qatar University, Doha, Qatar. He has established an international reputation in the fields of polymer nanocomposites composite materials, device designs especially based on sensor and high-performance nanocomposites with different industrial applications. Since 2009, Dr. Kishor has been helping to build communities in the interdisciplinary area of nanocomposite and its industrial technologies. Recently, Dr. Kishor has been started a group called Smart Nano Solutions at Center for Advanced Materials, Qatar University. He has published more than 100 Journal papers, 12 book chapters and 7 books edited. In recent five years, he has published over 70 papers in international peer-reviewed journals such as Small, Sensors and Actuators B, Journal of Physical Chemistry B, and Progress in Polymer Science. His research work has been cited more than 2600 times as listed at google scholar. He has edited seven books and two of them were included in Springers Top 25 e-book download of the year. He has registered seven invention patents and two of them have been filed. He has given several invited talks at international conferences. He is serving as Managing Editor for the Emergent Materials Journal (Springer) lead by the Qatar University and Qatar Petroleum Company (QAPCO) and Editorial Board Member for the Bulletin of Chemical and Pharma Research. He serves as Guest Editor in Sensors & Transducers journal and Lead Guest Editor in International Journal of Materials Science and Applications. Dr. Kishor achievements have been recognized by award such as Tyre & Rubber Industry Leadership Acknowledgement Awards (TRILA): Young Research Scholar of the Year 2017. He has worked in many international laboratories including USA, Qatar, South Korea, Germany, Sweden, Italy and France

Bandar AlMangour is currently an Assistant Professor at King Fahd University of Petroleum and Minerals (KFUPM) in the Department of Mechanical Engineering. Prior to joining KFUPM, AlMangour has served in multiple operational and research roles within SABIC, Saudi Arabia, and has pursued his Postdoctoral Fellowship at Harvard University. Dr. AlMangour received his Ph.D./MSc, with distinction, in Materials Science and Engineering from UCLA in 2017 and 2014 respectively, and MEng in Materials Engineering from McGill University in 2012 and a BSc in Mechanical Engineering from KFUPM in 2005. He sits on the Editorial (Advisory) Board of several international journals, and he is a Committee Member in the Journal of Materials Engineering and Performance, ASM International. AlMangour is still a member of several professional organizations and he serves as a reviewer in several internationally recognized journals. He has served as principal investigator (PI) or co-PI forseveral research projects. His research is generally concerned with the investigation of fundamental industrial problems related to the processing, microstructure, and behavior of materials, ranging from metals to (nano-) composites, for advanced structural and biomedical applications. His current research focuses on scalable materials processing including additive manufacturing and powder metallurgy, mechanical behavior at multiple length scales, bulk nanostructured alloys and composites, and surface engineering. AlMangour has authored more than 40 peer-reviewed papers in internationally recognized journals. AlMangour has more than 2,100 citations from his numerous refereed publications on additive manufacturing and surface engineering, and his research developments have been presented at well over two dozen international conferences, including invited talks in UAE, Turkey, and Greece. In 2019, AlMangour received the Gulf Engineering Union Award for Excellence and Engineering Innovation. AlMangour was also awarded the SABIC Graduate Fellowships, the Undergraduate Memorial Honor Medal (2005), Certificates of Distinction (KFUPM, 2004 and 2005), Outstanding Ph.D. Student Award (2017), and FEI Tony Award for best SEM image (2017).

Dr. Mohd Shukry Abdul Majid is presently working as Dean, in the Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis. He received his Bachelor of Engineering in Mechanical Engineering from University Manchester Institute of Science and Technology (UMIST) in 2001. Upon his return to Malaysia, he worked as Research and Development (R&D) Engineer at a semiconductor industry before joining Universiti Malaysia Perlis (UniMAP) as Lecturer in 2004. He completed his M.Sc. in Mechanical Systems Engineering from the University of Liverpool in 2005 and his Ph.D. in Composite Engineering from Newcastle University, United Kingdom in 2011. H served in Universiti Malaysia Perlis as Associate Professor at School of Mechatronic Engineering after being promoted in 2016. An advocate of interdisciplinary research, his research interests lie in the strength of material's area with emphasis on the composite piping, looking at the performance of composite structures, NDE's of composites and natural fiber/green composites, hybrid reinforced/filled polymer composites, lignocellulosic reinforced/filled polymer, and biodegradable composites. Though considered junior in the research world, his aptitude for high-quality research of international standing has been supported by his 217 Scopus indexed publications with 39 (29 Q1) publications in ISI-ranked Journals having a cumulative impact factor (CIF) of 123.679. His research findings have been published in the prestige "Composite Structures", (Q1, 5% percentile) journal where there are 12 of his papers from a total of 68 papers written by researchers from across Malaysia. In addition, he is also regular Reviewer for several high-impacts ISI ranked journals. To date, Ir. Dr. Mohd Shukry has successfully supervised 5 Ph.D. and 15 M.Sc. students and is currently supervising further 6 Ph.D. and 9 M.Sc. students. He received his professional engineer qualification (Ir.) from Board of Engineer Malaysia (BEM) in Mac 2016 and has been Chartered Engineer (C.Eng.) from the Engineering Council, United Kingdom since 2014. Ir. Dr. Mohd Shukry Abdul Majid is a qualified evaluating panel for Engineering Accreditation Council (EAC) and Engineering Technology Accreditation Council (ETAC) which provides quality assurance in engineering higher education in Malaysia. Ir. Dr. Mohd Shukry has been honored with numerous local and international awards for his achievements including ITEX, MTE, and PECIPTA. He is the first recipient from Technical University Network (MTUN) to have been awarded Malaysia’s Research Star Award 2017, as one of Malaysia’s most promising and influential researchers by the Ministry of High Education Malaysia (MOHE).

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

We carry a comprehensive range of out of print and rare books.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

Kennys Bookshop and Art Galleries (Holdings) Limited
Liosb�n Retail Park, Tuam Road, Galway, H91 N5P8, Ireland

Condiciones de venta y env�o

Condiciones de venta

We guarantee the condition of every book as it's described on the Abebooks websites.

If you're dissatisfied with your purchase (Incorrect Book/Not as Described/Damaged) or if the order hasn't arrived, you're eligible for a refund within 30 days of the estimated delivery date.

For any queries please use the contact seller link or send an email to books@kennys.ie

Conor Kenny

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a Kennys Bookstore, Olney, Maryland, U.S.A., sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

All books securely packaged. Some books ship from Ireland.

Tarifas de env�o en Estados Unidos de America

Tarifas de env�o en Estados Unidos de America
Cantidad del pedido	De 14 a 20 d�as h�biles	De 13 a 14 d�as h�biles
Primer art�culo	EUR 9.16	EUR 18.32

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.