This book focuses on the research and development challenges posed by 3D video systems based on multi-view plus depth (MVD) technology. This technology can produce a realistic immersive experience generating synthetic video views on the decoder side, reducing the amount of information on the encoder side. The discussion presented in this book explores the MVD characteristics to propose high-throughput and energy-efficient architectures/systems, focusing on 3D-HEVC, the state-of-the-art standard for exploiting the MVD concept. The book includes an extensive discussion of the 3D-HEVC video encoding, followed by an in-depth evaluation of the 3D-HEVC reference software behavior. Then, the book presents in detail a set of high-throughput and energy-efficient architectures targeting the three main prediction steps inside the 3D-HEVC: intra-frame prediction, inter-frame prediction, and inter-view prediction.

Acerca del autor

Vladimir Afonso received the B.S. degree in industrial automation from the Sul-rio-grandense Federal Institute (IFSul), Pelotas, RS, Brazil, in 2008, the M.S. degree in computer science from the Federal University of Pelotas (UFPel), RS, Brazil, in 2013, and the Ph.D. degree on microelectronics from the Federal University of Rio Grande do Sul (UFRGS), Porto Alegre, RS, Brazil, in 2019. He is a Professor since 2009 at the IFSul and a researcher with the Video Technology Research Group (ViTech) at the UFPel. His research interests include 2D/3D video-coding algorithms, and FPGA-based and VLSI designs for video coding.

Murilo Perleberg received the B.S. degree in computer engineering and the M.S. degree in computer science from the Federal University of Pelotas (UFPel), Brazil, in 2018 and 2020, respectively. He is currently pursuing the Ph.D. degree in computer science at UFPel. He is a member of the Video Technology Research Group, UFPel. His research interests include VLSI design for video coding.

Bruno Zatt received his B.E. and M.S. in Computer Engineering from the Federal University of Rio Grande do Sul (UFRGS), Porto Alegre, Brazil, in 2006 and 2008, respectively. He received his Ph.D. degree in Microelectronics from the PGMICRO (Graduate Program on Microelectronics) at the same university in 2012 with "summa cum laude" distinction. Currently, Bruno Zatt is a Professor at the Federal University of Pelotas (UFPel), Pelotas, Brazil, and a member of the Group of Architectures and Integrated Circuits (GACI) and the Video Technology Research Group (ViTech). He has 19+ years of research experience os digital signal processing including 3 years as an intern researcher at the Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany, 1-year experience as a visiting professor at the University of California, Irvine, USA, and as visiting professor at the Universit� di Torino, Turin, Italy. He has published over 190+ papers in international journals/conferences and one book entitled "3D Video Coding for Embedded Devices". His expertise includes visual signal processing and coding standards such as 2D video coding (H.264, HEVC, AV1, VVC), multiview video coding (MVC), 3D video coding (3D-HEVC), and Light Fields coding (JPEG Pleno). He holds the status of IEEE Senior Member (since 2016) and CNPq (National Council for Scientific and Technological Development) productivity research fellow (since 2017). He has coordinated several research projects funded by public (FAPERGS, CNPq, CAPES) and private funding agencies (Instituto Serrapilheira). Prof. Zatt also contributes as a member of the Brazilian Committee on Audio, Image, Multimedia and Hypermedia Coding (under ABNT - Brazilian Association of Technical Standards), a member of the Brazilian Microelectronics Society (SBMICRO) council, and a member of IEEE CASS Visual Signal Processing and Communication Technical Committee (VSPC-TC). He served for four years as an adjunct coordinator and two years as coordinator of the Graduate Program in Computing at UFPel. Prof. Zatt also contributes as Coeditor of the Journal of Integrated Circuits and Systems (JICS), Associate Editor for the IEEE Open Journal of Signal Processing (OJ-SP), and Senior Associate Editor for the IEEE Transaction on Circuits and Systems for Video Technology (TCSVT).

Marcelo Schiavon Porto is a Brazilian Distinguished Researcher holding a CNPq PQ-1D grant. He received the M.S. and Ph.D. degrees in computer science from Federal University of Rio Grande do Sul (UFRGS), Brazil, in 2008 and 2012, respectively. He is currently a Professor with the Federal University of Pelotas (UFPel), Brazil, and a member of the Video Technology Research Group (ViTech) and the Group of Architectures and Integrated Circuits (GACI). He is currently a permanent member and advisor of doctor and master's students at the Graduate Program in Computing (PPGC) of UFPel. He also has been holding the status of CNPq (National Council for Scientific and Technological Development) Productivity Research Fellow, since 2016. His research interests include video coding, motion estimation algorithms, point cloud compression, coding complexity reduction, and energy-efficient VLSI design for video coding. Prof. Porto is a Senior Member of IEEE and member of SBC and SBMicro Brazilian societies.

Luciano Volcan Agostini is a Full Professor at the Federal University of Pelotas (UFPel), where he has been a faculty member since 2002. Currently, he is a CNPq Productivity Research Fellow (PQ) in category 1C and serves as Vice-President of the Brazilian Microelectronics Society (SBMicro). He founded and leads the Video Technology Research Group (ViTech) at UFPel. From 2017 to 2018, he conducted postdoctoral research at the University of Lisbon. He earned his Ph.D. (2007) and M.Sc. (2002) in Computer Science from the Federal University of Rio Grande do Sul (UFRGS). Agostini previously served as UFPel’s Vice-President for Research and Graduate Studies (2013-2017) and as President of the Pelotas Municipal Council of Science and Technology (2013-2017). His work has earned him numerous best paper awards, and he has played an active role in organizing events internationally. He is an Associate Editor for IEEE Transactions on Circuits for Video Technology (TCSVT), IEEE Open Journal of Circuits and Systems (OJCAS), and Frontiers in Imaging. His research focuses on hardware design for image and video compression, machine learning-based video compression algorithms, and AV1, VVC, VP9, HEVC, and H.264/AVC encoders. He also investigates 3D, 360, light fields, and point clouds coding, as well as digital design with FPGAs, ASICs, and microelectronics. Agostini is a Senior Member of both the IEEE and ACM societies, and an active member of SBMicro and Brazilian Computer Society (SBC) societies.

Altamiro Amadeu Susin was born in Vacaria-RS (Brazil) in 1945. He holds a degree in Electrical Engineering and a master's degree from the Federal University of Rio Grande do Sul (UFRGS) in 1972 and 1977, respectively, and a PhD in Computer Engineering - Microelectronics from the Institut National Polytechnique de Grenoble-France in 1981. He spent one year at McGill University, Montreal-Canada (1997/8) as a researcher in the mixed-signal group. He is a professor, now retired, in the Department of Electrical Engineering at UFRGS, responsible for the disciplines of Analog and Digital Electronics in the graduate and undergraduate courses, where he worked for over 40 years. He is also or was a member of the Graduate Programs in Computer Science, Electrical Engineering and Microelectronics at UFRGS. His main research interests are Integrated Circuit Architecture, Systems on Chip and Networks on Chip for complex multi-core systems and Signal Processing with over 50 technical papers published in these areas. He is/was responsible for several publicly and/or industrially funded R&D projects covering electronic instrumentation, audio and image processing, digital TV and computer vision for medical instrumentation, robotics and driving assistance and has supervised over a hundred graduate and undergraduate students. He has also designed and organized conferences and workshops on the above mentioned topics. He was vice-president and president of the Brazilian Society of Microelectronics and has participated as a member of committees of several research funding entities.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Professional Book Seller offering fast shipping and hassle-free returns for every order. Our 100% satisfaction policy guarantees that you get the best product and the best service at the best price!

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

Basi6 International LLC
1018 Camino Lago, Irving, TX, 75039, U.S.A.

Condiciones de venta y env�o

Condiciones de venta

Professional Book Seller shipping from Multiple Locations Worldwide for fastest delivery possible!

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a Basi6 International, Irving, Texas, U.S.A., sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

All orders shipped via FedEx or DHL and delivered to your doorstep within 3-5 days. We do not ship to P.O.Boxes and a proper street address must be provided to avoid any delays.

Tarifas de env�o en Estados Unidos de America

Tarifas de env�o en Estados Unidos de America
Cantidad del pedido	De 5 a 14 d�as h�biles	De 3 a 6 d�as h�biles
Primer art�culo	EUR 0.00	EUR 0.00

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor