nach der Bestellung gedruckt Neuware - Printed after ordering - This handbook gives readers a close look at the entire technology of printing very high resolution and high density integrated circuit (IC) patterns into thin resist process transfer coatings-- including optical lithography, electron beam, ion beam, and x-ray lithography. The book's main theme is the special printing process needed to achieve volume high density IC chip production, especially in the Dynamic Random Access Memory (DRAM) industry. The book leads off with a comparison of various lithography methods, covering the three major patterning parameters of line/space, resolution, line edge and pattern feature dimension control. The book's explanation of resist and resist process equipment technology may well be the first practical description of the relationship between the resist process and equipment parameters. The basics of resist technology are completely covered -- including an entire chapter on resist process defectivity and the potential yield limiting effect on device production. Each alternative lithographic technique and testing method is considered and evaluated: basic metrology including optical, scanning-electron-microscope (SEM) techniques and electrical test devices, along with explanations of actual printing tools and their design, construction and performance. The editor devotes an entire chapter to today's sophisticated, complex electron-beam printers, and to the emerging x-ray printing technology now used in high-density CMOS devices. Energetic ion particle printing is a controllable, steerable technology that does not rely on resist, and occupies a final section of the handbook.

N� de ref. del art�culo 9780815512813

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo: Handbook of VLSI Microlithography : Principles, Technology and Applications
Editor: Elsevier Science & Technology, William Andrew
Fecha de publicaci�n: 1991
Idioma: Ingl�s
ISBN 10: 0815512813
ISBN 13: 9780815512813
Encuadernaci�n: Buch
Estado: Neu

Acerca de

Sinopsis

This handbook gives readers a close look at the entire technology of printing very high resolution and high density integrated circuit (IC) patterns into thin resist process transfer coatings-- including optical lithography, electron beam, ion beam, and x-ray lithography. The book's main theme is the special printing process needed to achieve volume high density IC chip production, especially in the Dynamic Random Access Memory (DRAM) industry. The book leads off with a comparison of various lithography methods, covering the three major patterning parameters of line/space, resolution, line edge and pattern feature dimension control. The book's explanation of resist and resist process equipment technology may well be the first practical description of the relationship between the resist process and equipment parameters. The basics of resist technology are completely covered -- including an entire chapter on resist process defectivity and the potential yield limiting effect on device production. Each alternative lithographic technique and testing method is considered and evaluated: basic metrology including optical, scanning-electron-microscope (SEM) techniques and electrical test devices, along with explanations of actual printing tools and their design, construction and performance. The editor devotes an entire chapter to today's sophisticated, complex electron-beam printers, and to the emerging x-ray printing technology now used in high-density CMOS devices. Energetic ion particle printing is a controllable, steerable technology that does not rely on resist, and occupies a final section of the handbook.

Acerca del autor

John Helbert is a Senior Member of the Motorola Technical Staff. He earned his doctorate in Physical

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Das Unternehmen AHA-BUCH GmbH: Seit der Gr�ndung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisg�nstig wie m�glich ihren B�cherwunsch zu erf�llen. Unsere Firma besch�ftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine W�nsche! Auf �ber 3700 m2 Fl�che haben wir �ber 100.000 B�cher, Modernes Antiquariat und Spiele auf Lager.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

AHA-BUCH GmbH
Garlebsen 48, Einbeck, 37574, Germany

Condiciones de venta y env�o

Condiciones de venta

T�rminos y Condiciones Generales e Informaci�n del Cliente / Pol�tica de Privacidad

I. T�rminos y Condiciones Generales

� 1 Disposiciones b�sicas

(1)Los siguientes t�rminos y condiciones se aplican a todos los contratos que celebre con nosotros como proveedor (AHA-BUCH GmbH) a trav�s de las plataformas de Internet AbeBooks y/o ZVAB. A menos que se acuerde lo contrario, se objetar� la inclusi�n de cualquiera de sus propios t�rminos y condiciones utilizados por usted.
(2)Un consumidor en el sentid...

M�s informaci�n

Condiciones de env�o

Enviamos su pedido despu�s de recibirlos
para art�culos disponibles las �ltimas 24 horas,
para art�culos con suministro nocturno a m�s tardar 48 horas.
En caso de que necesitemos pedir un art�culo a nuestro proveedor, nuestro tiempo de env�o depende de la fecha de recepci�n de los art�culos, pero los art�culos se enviar�n el mismo d�a.

Nuestro objetivo es enviar los art�culos pedidos de la manera m�s r�pida, pero tambi�n m�s eficiente y segura a nuestros clientes.

Informaci�n detallada sobre el vendedor