T�tulo: Handbook of Re-Engineering Software Intensive Systems into Software Product Lines
Editor: Springer
Fecha de publicaci�n: 2023
Idioma: Ingl�s
ISBN 10: 3031116887
ISBN 13: 9783031116889
Encuadernaci�n: Encuadernaci�n de tapa blanda
Estado: New

Acerca de

Sinopsis

This handbook distils the wealth of expertise and knowledge from a large community of researchers and industrial practitioners in Software Product Lines (SPLs) gained through extensive and rigorous theoretical, empirical, and applied research. It is a timely compilation of well-established and cutting-edge approaches that can be leveraged by those facing the prevailing and daunting challenge of re-engineering their systems into SPLs. The selection of chapters provides readers with a wide and diverse perspective that reflects the complementary and varied expertise of the chapter authors. This perspective covers the re-engineering processes, from planning to execution.

SPLs are families of systems that share common assets, allowing a disciplined software reuse. The adoption of SPL practices has shown to enable significant technical and economic benefits for the companies that employ them. However, successful SPLs rarely start from scratch, but instead, they usually start from a set of existing systems that must undergo well-defined re-engineering processes to unleash new levels of productivity and competitiveness.

Practitioners will benefit from the lessons learned by the community, captured in the array of methodological and technological alternatives presented in the chapters of the handbook, and will gain the confidence for undertaking their own re-engineering challenges. Researchers and educators will find a valuable single-entry point to quickly become familiar with the state-of-the-art on the topic and the open research opportunities; including undergraduate, graduate students, and R&D engineers who want to have a comprehensive understanding of techniques in reverse engineering and re-engineering of variability-rich software systems.

Acerca del autor

Roberto Erick Lopez-Herrejon is an Associate Professor at the Department of Software Engineering and Information Technology of the �cole de technologie sup�rieure of the University of Quebec in Montreal, Canada. Prior he was a senior postdoctoral researcher at the Johannes Kepler University in Linz, Austria. He was an Austrian Science Fund (FWF) Lise Meitner Fellow (2012-2014) at the same institution. From 2008 to 2014 he was an External Lecturer at the Software Engineering Masters Programme of the University of Oxford, England. From 2010 to 2012 he held an FP7 Intra-European Marie Curie Fellowship sponsored by the European Commission. From 2005 to 2008, he was a Career Development Fellow at the Software Engineering Centre of the University of Oxford sponsored by the Higher Education Funding Council of England (HEFCE). He obtained his Ph.D. from the University of Texas at Austin in 2006, funded in part by a Fulbright Fellowship sponsored by the U.S. State Department. His main expertise is in software customization, software product lines, search-based software engineering, and empirical software engineering.Jabier Martinez is part of the Software Technologies team at Tecnalia, Spain. His background is in providing methods and tools for systems modelling, and for achieving systematic reuse covering all the artefacts that conform a system life-cycle. He obtained the title of computer engineering from the University of the Basque Country in 2007 and, after several years of industrial experience, he received his PhD in 2016 from the Luxembourg University (SnT, Interdisciplinary centre for Security and Trust) and Sorbonne University (Lip6, Laboratory of Computer Sciences, Paris 6) with an awarded thesis about mining software artefacts for product line migration and analysis. He co-organizes the Reverse Variability Engineering series of workshops and has authored more than fifty peer-reviewed publications, and participated in several European research projects, on modelling, software reuse, variability management, software product lines, safety and security.
Wesley Klewerton Guez Assun��o is currently a University Assistant at Johannes Kepler University Linz (JKU) - Austria and Postdoctoral researcher at Pontifical Catholic University of Rio de Janeiro (PUC-Rio) - Brazil. Wesley received his M.Sc. in Informatics (2012) and Ph.D. in Computer Science (2017) both from Federal University of Paran� (UFPR) - Brazil. His areas of interest are Software Modernization, Variability Management, Collaborative Engineering of Complex Systems, Software Testing, and Search Based Software Engineering. He published research papers, in collaboration with many international researchers, in conferences like ICSME, SANER, MSR, EASE, SPLC, SSBSE, GECCO, to cite some, as well as in journals such as EMSE, IST, and JSS. Wesley has also served as reviewers for many conferences and journals, and as organizer of conferences (e.g., PC co-chairof SPLC’22), symposiums, workshops, competitions, and meetings.Mathieu Acher is Associate Professor at University of Rennes 1/IRISA/Inria, France. His research focuses on modelling, reverse engineering, and learning variability of software-intensive systems. He is the author of more than one hundred peer-reviewed publications in international journals and conferences. He was program committee co-chair of SPLC (Systems and Software Product Line Conference) 2017 and VaMoS (Conference on Variability Modelling of Software-Intensive Systems) 2020, served in the steering committees of SPLC and VaMoS, and co-organized the Reverse Variability Engineering series of workshops. His work has received one Most Influential Paper Award (SLE’19) and two Best Paper Awards (SPLC’21, ICPE’19). He is currently leading a research project, VaryVary, on machine learning and (deep) software variability. Since 2021, he is a junior research fellow at Institut Universitaire de France (IUF).Tewfik Ziadi is Associate Professor at the Sorbonne University and the head of the MoVe team at LIP6 Lab. He received a Ph.D. in Computer Science from Universite of Rennes 1 in 2005 and his habilitation (HDR) in 2016 from Sorbonne Universit�. His research interests include Software Product Lines, Variability Modeling, and Model-Driven Development. His research has been published at several top tier software engineering venues and journals, such as the TSE, IST, and JSS journals and the IEEE/ACM International Conference on Automated Software Engineering (ASE). He is a co-developer of the BUT4Reuse platform for Bottom-Up technologies for Reuse. He is the scientific coordinator of an international project and the general co-chair of the Systems and Software Product Line Conference (SPLC 2019) and co-chair of the ACM SAC VSPLE Variability and Software Product Line Engineering Track, 2019. He was the publication chair of ICSR 2018 (International Conference on Software Reuse), and co-chair of the editions of the REverse Variability Engineering workshop (REVE 2013–2018).
Silvia Regina Vergilio received Master and Doctoral degrees from University of Campinas (UNICAMP), Brazil. She is currently a professor of Software Engineering in the Computer Science Department of Federal University of Paran� (UFPR), Brazil, where she leads the Research Group on Software Engineering. She has been involved in several projects and her research is mainly supported by CNPq (PQ Level 1D). She is the author of more than one hundred peer-reviewed publications in international journals and conferences. She serves as assistant editor of the Journal of Software Engineering: Research and Development, and acts as peer reviewer for diverse international journals. She served on the Program Committee of conferences such as SPLC, SSBSE, CEC, GECCO, SANER, and ICPC. Her research interests include software testing, software reliability, Software Product Lines (SPLs) and Search-based Software Engineering (SBSE).

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

We carry a wide selection of books from South Asia, United States, UK.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

Readingos GmbH
Kaiserstra�e 47, Frankfurt am Main, 60329, Germany

Condiciones de venta y env�o

Condiciones de venta

Derecho a cancelaci�n

Si eres un consumidor puedes cancelar el presente contrato de acuerdo con lo indicado a continuaci�n. Son consumidores las personas f�sicas que act�en con un prop�sito ajeno a su actividad comercial, empresarial, oficio o profesi�n.

Documento de informaci�n al consumidor y usuario sobre el desistimiento

Derecho de desistimiento:

Tiene derecho a cancelar este contrato en un plazo de 14 d�as por cualquier motivo.

El plazo de desistimiento expirar� a los 14 d�as naturales del d�a en que t� o un tercero que hayas indicado, distinto del transportista, adquiera la posesi�n material del �ltimo bien, componente o pieza.

Para ejercer el derecho de desistimiento, deber�s notificarnos a Biblios, 47 Kaisetstrasse, 60329, frankfurt am main, hessen, Germany, de tu decisi�n de desistir del contrato a trav�s de una declaraci�n inequ�voca (por ejemplo, una carta enviada por correo postal, fax o correo electr�nico). Podr�s utilizar el modelo de formulario de desistimiento que figura a continuaci�n, aunque su uso no es obligatorio. Tienes asimismo la opci�n de cumplimentar y enviar electr�nicamente el modelo de formulario de desistimiento o cualquier otra declaraci�n inequ�voca a trav�s de nuestro sitio web a "Mis pedidos" en "Mi cuenta". Si recurres a esta opci�n, te comunicaremos sin demora en un soporte duradero (por ejemplo, por correo electr�nico) la recepci�n de dicho desistimiento.

Para cumplir el plazo de desistimiento, basta con que la comunicaci�n relativa al ejercicio por tu parte de este derecho sea enviada antes de que venza el plazo correspondiente.

Consecuencias del desistimiento:

En caso de desistimiento por tu parte, te devolveremos todos los pagos recibidos de ti, incluidos los gastos de entrega (con la excepci�n de los gastos adicionales resultantes de la elecci�n por tu parte de una modalidad de entrega diferente a la modalidad menos costosa de entrega ordinaria que ofrezcamos) sin ninguna demora indebida y, en todo caso, a m�s tardar 14 d�as naturales a partir de la fecha en la que se nos informes de tu decisi�n de desistir del presente contrato. Procederemos a efectuar dicho reembolso utilizando el mismo medio de pago empleado por ti para la transacci�n inicial, a no ser que hayas dispuesto expresamente lo contrario; en todo caso, no incurrir�s en ning�n gasto como consecuencia del reembolso.

Podremos retenerte el reembolso hasta haber recibido los bienes, o hasta que hayas presentado una prueba de la devoluci�n de los mismos, seg�n qu� condici�n se cumpla primero. Deber�s devolvernos o entregarnos directamente los bienes a Biblios, 47 Kaisetstrasse, 60329, frankfurt am main, Germany, sin ninguna demora indebida y, en cualquier caso, a m�s tardar en el plazo de 14 d�as naturales a partir de la fecha en que nos comuniques tu decisi�n de desistimiento del contrato. Se considerar� cumplido el plazo si efect�as la devoluci�n de los bienes antes de que haya concluido dicho plazo. Deber�s asumir el coste directo de devoluci�n de los bienes. Solo ser�s responsable de la disminuci�n de valor de los bienes resultante de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento:

La entrega de peri�dicos, publicaciones especializadas o revistas con la excepci�n de contratos de suscripci�n; y
La entrega de contenido digital (incluyendo apps, MP3, etc.) que no hubiera sido entregado en un medio tangible (por ejemplo: CD o DVD), si al realizar tu pedido has aceptado que podemos proceder al env�o del producto y que no resulta posible su cancelaci�n una vez comienza la entrega.

Modelo de formulario de desistimiento

(S�lo debe cumplimentar y enviar el presente formulario si desea desistir del contrato)

A la atenci�n de: (Biblios, 47 Kaisetstrasse, 60329, frankfurt am main, hessen, Germany)

Por la presente le comunico/comunicamos* que desisto de mi/desistimos de nuestro* contrato de venta del siguiente bien/prestaci�n del siguiente servicio*

Pedido el/recibido el*:

Nombre del consumidor y usuario o de los consumidores y usuarios:

Domicilio del consumidor y usuario o de los consumidores y usuarios:

Firma del consumidor y usuario o de los consumidores y usuarios (solo si el presente formulario se presenta en papel):

Fecha:

* Eliminar en su caso

Condiciones de env�o

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 25 a 45 d�as h�biles	De 8 a 14 d�as h�biles
Primer art�culo	EUR 9.95	EUR 18.70

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor