Gas Kinetics and Energy Transfer : Volume 4
Idioma: inglés
Editorial: Royal Society Of Chemistry Jan 1981, 1981
- Tapa dura
- Nuevo

Librería: AHA-BUCH GmbH, Einbeck, AlemaniaAHA-BUCH GmbH
Vendedor de IberLibro desde 14 de agosto de 2006
Condición: Nuevo
EUR 578,56
Cantidad disponible: 2 disponibles
Añadir al carritoDescripción del artículo del vendedor
Neuware - Specialist Periodical Reports provide systematic and detailed review coverage of progress in the major areas of chemical research. Written by experts in their specialist fields the series creates a unique service for the active research chemist, supplying regular critical in-depth accounts of progress in particular areas of chemistry. For over 80 years the Royal Society of Chemistry and its predecessor, the Chemical Society, have been publishing reports charting developments in chemistry, which originally took the form of Annual Reports. However, by 1967 the whole spectrum of chemistry could no longer be contained within one volume and the series Specialist Periodical Reports was born. The Annual Reports themselves still existed but were divided into two, and subsequently three, volumes covering Inorganic, Organic and Physical Chemistry. For more general coverage of the highlights in chemistry they remain a 'must'. Since that time the SPR series has altered according to the fluctuating degree of activity in various fields of chemistry. Some titles have remained unchanged, while others have altered their emphasis along with their titles; some have been combined under a new name whereas others have had to be discontinued. The current list of Specialist Periodical Reports can be seen on the inside flap of this volume.…
N° de ref. del artículo 9780851867861
- Título
- Gas Kinetics and Energy Transfer : Volume 4
- Autor
- R J Donovan
- Editorial
- Royal Society Of Chemistry Jan 1981
- Año de publicación
- 1981
- Estado
- Neu
- Encuadernación
- Buch
- Idioma
- inglés
- ISBN 10
- 0851867863
- ISBN 13
- 9780851867861
- Peso del artículo
- 475 gramos
- Dimensiones
- 216x140x19 mm
Reflecting the growing volume of published work in this field, researchers will find this book an invaluable source of information on current methods and applications.
“Sinopsis” puede pertenecer a otra edición de este título.
Fragmento. © Reproducción autorizada. Todos los derechos reservados.
Gas Kinetics and Energy Transfer Volume 4
A Review of the Literature Published Up to Early 1980
By P. G. Ashmore, R. J. DonovanThe Royal Society of Chemistry
All rights reserved.
Contents
Chapter 1 Reactions Studied by Molecular Beam Techniques By R. Grice, 1,
Chapter 2 Reorientation by Elastic and Rotationally Inelastic Transitions By A. J. McCaffery, 47,
Chapter 3 Infrared Multiple Photon Excitation and Dissociation: Reaction Kinetics and Radical Formation By M. N. R. Ashfold and G. Hancock, 73,
Chapter 4 Ultraviolet Multiphoton Excitation: Formation and Kinetic Studies of Electronically Excited Atoms and Free Radicals By R. J. Donovan, 117,
Chapter 5 Gas Phase Reactions of Hydroxyl Radicals By D. L. Baulch and I. M. Campbell, 137,
Chapter 6 Gas-phase Chemistry of the Minor Constituents of the Troposphere By R. A. Cox and R. G. Derwent, 189,
Author Index, 235,
CHAPTER 1
Reactions Studied by Molecular Beam Techniques
BY R. GRICE
1 Introduction
The objective of reactive scattering experiments in molecular beams is to gain a full understanding of the dynamics of chemical reactions. Early studies involving alkali-metal atom reactions required only relatively straightforward techniques by means of which many important results have been obtained. Effective models of the reaction dynamics have also been developed which rely on the simplicity of the chemical interactions in alkali-metal systems. These are frequently dominated by ionic potential-energy surfaces, which intersect the covalent surfaces and give rise to electron-jump transitions. However, the most important reactions of gas-phase chemical kinetics are those of atoms and free radicals, which determine the chemistry of combustion, pyrolysis, and upper atmosphere processes. The experimental techniques required for the study of such non-alkali-metal reactions are considerably more complex than those required for alkali-metal reactions. Moreover, the chemical interactions involved are frequently much more complicated than those which govern alkali-metal reactions and hence more comprehensive experimental information is required for the development of adequate models of the reaction dynamics. Experimental techniques for the study of non-alkali-metal reactive scattering have been advanced and refined extensively over the past decade, so that it is now possible to make detailed measurements of differential reaction cross-sections for an increasing range of atom and free-radical reactions. The rapid progress of laser technology is also having a major impact on reactive scattering experiments. Reactant molecules may be promoted to excited vibrational, rotational, or electronic states and their orientations thereby selected. Similarly, the vibrational and rotational state distributions of product molecules may be determined by laser fluorescence spectroscopy. In this Report we review progress in reactive scattering experiments and examine the extent to which the measurements so far accumulated demonstrate the dependence of reaction dynamics on the electronic structure of the reaction potential-energy surface.
Progress in this field was reviewed during 1976 in Faraday Discuss. Chem. Soc., 1976, 62, on 'Potential Energy Surfaces' and the meeting on 'Energy Transfer Processes', a Report of which appeared in Ber. Bunsenges. Phys. Chem., 1976, 81. Accordingly, this Report concentrates on work that has appeared since these meetings, from the beginning of 1977 to late 1979. Chemiluminescence in the gas phase, including molecular beam experiments, has recently been reviewed in this series. Thus, discussion here of chemiluminescence measurements in molecular beams will be confined to showing their relationship to other molecular beam studies; the reader is referred to the previous review for detailed discussion of spectral assignments, lifetimes, and bond energies.
2 Experimental Techniques
Early crossed-beam studies of non-alkali-metal reactive scattering employed mass-spectrometric detection with an effusive atom or free-radical source and conventional time-of-flight velocity analysis. However, an effusive source permits only crude control of the reactant translational energy, unless a mechanical velocity selector is employed at a considerable cost in beam intensity. Moreover, the inefficiency of the conventional time-of-flight method of velocity analysis and the low intensity of the effusive beam source limits the determination of differential reaction cross-sections in this form of experiment to favourable reactions with fairly large total-reaction cross-sections Q [??] 1 Å2. In order to overcome these limitations and to extend measurements of differential reaction cross-sections to a wider range of reactions, supersonic beams of atoms and free radicals seeded in inert buffer gas are now being used in place of effusive sources and cross-correlation time-of-flight analysis in place of the conventional method.
Supersonic nozzle beam sources have been used for a considerable time to produce intense beams of stable molecules with narrow velocity distributions. In a seeded supersonic expansion of a dilute mixture of a heavy gas in a light buffer gas, the heavy molecules are accelerated to the same velocity as that of the light buffer gas. Consequently, the translational energy of the heavy molecule in such a seeded beam is increased in the ratio of the molecular weight of the heavy molecule to the mean molecular weight of the gas mixture. Thus the translational energy may be controlled by varying the molecular weight of the buffer gas. Reactive scattering apparatus employing seeded supersonic nozzle beams requires powerful source differential pumping (Figure 1) by an apparatus that has pumping speeds of 4600, 1500, and 5600 1 s-1 on the source, buffer, and scattering chambers. Supersonic beams of halogen atoms and hydrogen atoms may be produced by thermal dissociation of the diatomic molecules in a high-temperature oven. Beams of fluorine atoms seeded in helium and argon buffer gases have been produced from a nickel oven at ca. 1100 K. Similarly, beams of chlorine and bromine atoms seeded in helium and argon buffer gases have been produced by use of a graphite oven (Figure 2) at a higher temperature, ca. 2000 K. Both the nickel and the graphite ovens are heated by a direct curent [??] 450 A flowing through the oven body to obtain [??] 80% dissociation of the halogen molecules at a pressure of ca. 10 mbar, with the inert buffer gas making up a total pressure [??] 1000 mbar. These oven materials are not corroded significantly by the halogens under these conditions. A supersonic hydrogen-atom beam seeded in undissociated hydrogen molecules has been produced from a tungsten oven at ca. 2800 K. Owing to the high pressure of ca. 1500 mbar of hydrogen in the source and the high bond-strength of the hydrogen molecule only a small degree of dissociation, ca. 5%, can be achieved at temperatures below the point at which tungsten softens unduly. Rather higher degrees of dissociation were obtained by using helium and neon buffer gases to produce a hypothermal supersonic hydrogen-atom beam. Beams of alkali-metal atoms seeded in helium, argon, and hydrogen buffer gases may more readily be produced by maintaining an appropriate alkali-metal vapour pressure in a stainless-steel oven. However, the thermal dissociation method is limited by the necessity of finding oven materials that can reach the temperatures required to attain significant dissociation and resist corrosion by the reactive species thus produced. An alternative method of dissociation involves the use of a high-pressure discharge source. The production of a supersonic oxygen-atom beam seeded in helium buffer gas was first achieved by Miller and Patch using radio-frequency excitation. More recently, a microwave discharge source has been used to produce supersonic beams of oxygen, hydrogen, and chlorine atoms seeded in helium and neon buffer gases. The source (Figure 3) operates in a vacuum to create a discharge in the quartz tube, which is foreshortened compared with that reported in ref. 13. Gas issuing from the nozzle at the end of the quartz tube is sampled by the skimmer to yield a supersonic beam with [??]70% dissociation of oxygen, hydrogen, or chlorine molecules. Microwave excitation is generally preferable to r.f. excitation owing to its stronger coupling to the discharge plasma. However, the radio-frequency method has been extended by Lee and co-workers to produce supersonic beams of oxygen atoms seeded in argon and helium. In this source the plasma extends through the nozzle and the beam contains ions and metastable electronically excited O(1D) in addition to ground-state O(3P) oxygen atoms when using helium buffer gas. The possible production of metastable electronicallyexcited species must always be considered when using a discharge source rather than thermal dissociation. Even under the more controlled conditions of microwave excitation, where the plasma does not extend through the nozzle, the metastable electronically-excited O2(lΔg) molecule is expected to be present in the beam. Fortunately, O2(1Δg) molecules are generally much less reactive than ground-state O(3P) atoms, but the chemistry of each reaction must be checked to ensure that O2(1Δg) makes no significant contribution to the observed reactive scattering. Direct-current discharges have been used as sources of supersonic hydrogen and nitrogen atom beams with very high, ca. 6000 K, effective source temperatures. However, this very hot plasma also extends through the nozzle of these sources and the production of metastable electronically-excited species presents a very acute problem. This may inhibit the use of these sources in the study of reactive scattering by ground-state atoms particularly for the nitrogen case. On the other hand, discharge sources may be used to study reactions of metastable electronically-excited atoms that are endoergic for ground-state atoms, provided that only a single electronically-excited state contributes to the reactive scattering. It has proved possible to use the r.f. source in this way to measure reactive scattering by metastable O(1D) atoms. A supersonic beam of mercury atoms in the metastable Hg(3P0) electronically-excited state seeded in nitrogen buffer gas has been produced by illuminating a quartz nozzle tube with resonance radiation from low-pressure mercury lamps.
The conventional method of time-of-flight velocity analysis, whereby a single pulse of molecules is transmitted by a chopper disc and the time-of-flight distribution measured in computer-generated time channels before a further pulse of molecules is transmitted, suffers from a very poor duty cycle, ca. 5 %. This may be overcome if the single slot of the conventional disc is replaced by a pseudorandom sequence of slots and teeth, which constitute a Hadamard sequence of 2n – 1 elements, where n is an integer and the duty cycle is raised to ca. 50%. The arrival times of molecules at the detector resulting from the pseudorandom chopper disc are measured in computer-generated time channels and the results cross-correlated with the appropriate complementary sequence. Hirschy and Aldridge first applied this method in molecular beam experiments to measure the velocity distribution of an argon nozzle beam. A recent implementation of the cross-correlation method for measuring velocity distributions of reactive scattering is illustrated by the chopper disc shown in Figure 4 and the computer interface shown in Figure 5. In this implementation of the cross-correlation method, the rotation of the chopper disc and the advance of the channel address register in the interface are permanently synchronized. The atom or free radical beam is also modulated by a tuning-fork chopper to ensure the unambiguous measurement of scattering from the beam-intersection zone. After cross-correlation with the complementary sequence, the time-of-flight data is deconvolved and transformed to velocity space using the same algorithms as in the conventional method. Consequently, the time-of-flight system may use the cross-correlation or conventional methods with equal facility. While the cross-correlation method is preferred for measuring the low intensities of reactive scattering, the conventional method is more convenient for measuring velocity distributions of energetic seeded beams where intensities must be reduced by restricting the detector aperture and the poor efficiency of the conventional method is not detrimental.
The application of lasers to reactive scattering experiments continues to be determined by the availability of certain types of high-powered lasers. The hydrogen halide chemical lasers are particularly effective at producing vibrational excitation of reactant hydrogen halide beams, as the laser transition coincides with the absorbing transition of the beam molecules. This method has been to excite hydrogen chloride and fluoride molecules from the vibrational ground state to specific rotational levels J = 1 — 4 of the first vibrationally-excited state. Electronic excitation of reactant molecules usually depends upon chance coincidences between an available intense laser line and an absorption transition of a reactant molecule. The excitation of the v' = 43, J' = 13 vibration–rotational level of the I2[B3 Π(0+u)] state by an argon ion laser has proved a useful example. Indeed, excitation of a diatomic molecule by plane or circularly polarized light yields excited molecules with selected orientations and this excitation has recently been used to study the orientation dependence of the reaction of I2[B3 Π(O+u)] with indium and thallium atoms. Similarly, rotation-vibrational excitation of hydrogen fluoride has been used to study the orientation dependence of its reaction with strontium atoms. Atoms and molecules with low-lying excited electronic states may be excited selectively by a tunable dye laser. This method has been used to excite beams of sodium atoms to the 2P electronically-excited state, strontium and barium atoms to the 3P electronically-excited state, and sodium dimers to the 1Πu electronically-excited state. In each of these cases of excitation to electronically-excited states the laser must illuminate the beam-intersection zone, since the excited atoms and molecules travel only a short distance, [??]0.1 mm, during their radiative lifetimes. However, excitation of a diatomic molecule prior to the beam-intersection zone allows fluorescent decay to vibration-rotation states of the ground electronic state different from the vibration-rotation state from which it was excited. Indeed excitation of a beam of sodium dimers to the Na2(1Πu) electronically- excited state by a tunable dye laser followed by fluorescent decay has been used to modulate specific-rotational-state populations of the ground vibrational and electronic state.
The laser-induced fluorescence method of determining product internal-state distributions has been improved by the introduction of optical-fibre techniques in the construction of the rotatable detector (Figure 6). This permits measurement of angular distributions of product scattering while maintaining the beam sources stationary as required for the use of seeded nozzle beam sources. When the laser line used in laser-induced fluorescence detection is sufficiently narrow the Doppler shift due to the component of molecular velocity along the direction of the laser beam may be observedZ6 and information on the product velocity distribution thereby obtained. Indeed it has been suggested that full contour maps of reactive scattering of specific product internal states as a function of laboratory scattering angle and velocity may be determined by Fouriq transformation of Doppler profiles measured by laser-induced fluorescence. In this method the laser beam passes through the beam intersection region and Doppler profiles are measured for different angles of incidence of the laser beam with respect to the molecular beams. Thus components of the laboratory product velocity distribution along the laser beam are measured by the Doppler profile at each angle of incidence and the full set of Doppler profiles may be inverted to obtain a contour map of the product angle-velocity distribution by standard Fourier transform techniques. Such a contour map has recently been obtained for the hydroxy-radical product scattering from the reaction of an effusive hydrogen-atom beam with a cross-beam of NO2 molecules. The detection of hydroxy-radicals and also of bromine atoms by the laser-induced fluorescence method illustrates the extension of tunable dye laser technology into the near-uv., which promises to bring many more species within the scope of this detection method.
A high-power argon ion laser has been used to produce nonresonant two-photon ionization of alkali-metal dimers, and tunable dye lasers to produce resonant multiphoton ionization of alkali-metal dimer, iodine, aniline, and benzene molecules. Resonant multiphoton ionization is a promising method of detecting scattered reaction products since it is insensitive to scattered laser light and the detection of ions is much more efficient than the detection of photons in the laser-induced fluorescence method. Indeed resonant multiphoton ionization has been used to detect BaCl product molecules from the reaction of barium atoms with hydrogen chloride molecules. However, the observed ionization was not readily related to the internal-state distribution of the reaction products. This appears to present a still more severe problem in the multiphoton ionization of polyatomic molecules where fragmentation may be more extensive than in electron bombardment ionization.
(Continues...)
Excerpted from Gas Kinetics and Energy Transfer Volume 4 by P. G. Ashmore, R. J. Donovan. Copyright © 1981 The Royal Society of Chemistry. Excerpted by permission of The Royal Society of Chemistry.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
“Acerca de” puede pertenecer a otra edición de este título.
AHA-BUCH GmbH
Einbeck, Alemania
Vendedor de IberLibro desde 14 de agosto de 2006
Tarifas de envío de Alemania a Estados Unidos de America
| Artículo | De 7 a 10 días hábiles | De 5 a 7 días hábiles |
|---|---|---|
| Primer artículo | EUR 35,00 | EUR 45,00 |
Métodos de pago
- Cheque
- Giro bancario
- PayPal
Descripción de la tienda
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Especialidad
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumInformación empresarial del vendedor
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Alemania 37574
IImprint
Información del vendedor
AHA-BUCH GmbH
representado por el director gerente Christel Glass
Garlebsen 48
37574 Einbeck
Alemania
Teléfono: 055639996039
Fax: 055639995974
E-Mail: abebooks@aha-buch.de
USt-IdNr.: DE261904229
Inscrita en el Registro Mercantil Amtsgerichtes Göttingen
Handelsregisternummer HRB 200691
Resolución alternativa de conflictos:
La Comisión Europea proporciona una plataforma para la resolución extrajudicial de litigios en línea (plataforma ODR), a la que se puede acceder en https://ec.europa.eu/odr.
Somos miembros de la iniciativa "FairCommerce" desde el 25.05.2018.
Para obtener más información, consulte www.fair-commerce.de.
Condiciones de venta
Términos y Condiciones Generales e Información del Cliente / Política de Privacidad
I. Términos y Condiciones Generales
§ 1 Disposiciones básicas
(1)Los siguientes términos y condiciones se aplican a todos los contratos que celebre con nosotros como proveedor (AHA-BUCH GmbH) a través de las plataformas de Internet AbeBooks y/o ZVAB. A menos que se acuerde lo contrario, se objetará la inclusión de cualquiera de sus propios términos y condiciones utilizados por usted.
(2)Un consumidor en el sentido de los siguientes reglamentos es cualquier persona física que concluye una transacción legal con fines que no pueden atribuirse predominantemente ni a su actividad comercial ni a su actividad profesional independiente. Un empresario es cualquier persona física o jurídica o sociedad con capacidad jurídica que, al concluir un negocio jurídico, actúa en el ejercicio de su actividad profesional o comercial independiente.
§ 2 Celebración del contrato
(1) El objeto del contrato es la venta de bienes.
(2) Si un artículo aparece en AbeBooks o ZVAB, la activación de la página de oferta en AbeBooks o ZVAB constituye la oferta vinculante para celebrar un contrato en las condiciones contenidas en la página del artículo.
(3) El contrato se celebra a través del sistema de carrito de la compra en línea de la siguiente manera:
Los bienes destinados a la compra se almacenan en el "carrito de compras". A través del botón correspondiente en la barra de navegación, puede llamar al "carrito de compras" y realizar cambios allí en cualquier momento.
Después de llamar a la página "Pago" e ingresar los datos personales, así como las condiciones de pago y envío, todos los datos del pedido se mostrarán nuevamente en la página de descripción general del pedido. Antes de enviar el pedido, tiene la opción de verificar toda la información nuevamente, cambiarla (también a través de la función "atrás" del navegador de Internet) o cancelar la compra.
Al enviar el pedido a través del botón "Comprar ahora", usted declara la aceptación de la oferta de manera legalmente vinculante, por lo que se concluye el contrato.
(4) El procesamiento del pedido y la transmisión de toda la información requerida en relación con la celebración del contrato se automatiza parcialmente por correo electrónico. Por lo tanto, debe asegurarse de que la dirección de correo electrónico que ha almacenado con nosotros es correcta, que la recepción de los correos electrónicos está técnicamente garantizada y, en particular, que los filtros de spam no lo impiden.
§ 3 Derecho de retención, retención de la titularidad
(1) Solo puede ejercer un derecho de retención si se trata de reclamaciones de la misma relación contractual.
(2) Los bienes siguen siendo de nuestra propiedad hasta el pago total del precio de compra.
§ 4 Garantía
(1)Los derechos legales de garantía existen.
(2)En el caso de bienes usados, el período de garantía es de un año a partir de la entrega del artículo, desviándose de la regulación legal. La reducción del plazo no se aplica:
- daños causados culposamente atribuibles a nosotros por lesiones a la vida, extremidades o alud y en el caso de otros daños causados intencionalmente o por negligencia grave;
- en la medida en que hayamos ocultado fraudulentamente el defecto o hayamos asumido una garantía de la calidad del artículo.
(3) Como consumidor, se le solicita que verifique el artículo inmediatamente después de la entrega para verificar su integridad, defectos obvios y daños en el transporte y que nos informe a nosotros y al agente de carga de cualquier queja lo antes posible. Si no cumple con esto, esto no tendrá ningún efecto en sus reclamos de garantía legales.
§ 5 Elección de la ley, lugar de cumplimiento, lugar de jurisdicción
(1)Se aplicará la legislación alemana. En el caso de los consumidores, esta elección de la ley aplicable solo se aplicará en la medida en que no se retire la protección otorgada por las disposiciones imperativas de la ley del Estado de residencia habitual del consumidor (principio de favorabilidad).
(2)El lugar de prestación de todos los servicios derivados de las relaciones comerciales existentes con nosotros, así como el lugar de jurisdicción, es nuestro domicilio social, en la medida en que usted no sea un consumidor, sino un comerciante, una entidad legal de derecho público o un fondo especial de derecho público. Lo mismo se aplica si no tiene un lugar general de jurisdicción en Alemania o la UE o si el domicilio o la residencia habitual no se conoce en el momento en que se presenta la acción. El derecho a apelar ante el tribunal en otro lugar legal de jurisdicción no se ve afectado por esto.
(3)Las disposiciones de la Convención de las Naciones Unidas sobre los Contratos de Compraventa Internacional de Mercaderías no se aplicarán expresamente.
II. Información del cliente
- Identidad del Vendedor
AHA-BUCH GmbH
Garlebsen 48
D-37574 Einbeck
Alemania
Teléfono: 055639996039
Correo electrónico: abebooks@aha-buch.de
Resolución alternativa de conflictos:
La Comisión Europea proporciona una plataforma para la resolución extrajudicial de litigios en línea (plataforma ODR), a la que se puede acceder en https://ec.europa.eu/odr.
- Información sobre la celebración del contrato
Los pasos técnicos para la conclusión del contrato, la conclusión del contrato en sí y las opciones de corrección se llevan a cabo de acuerdo con las disposiciones "Conclusión del contrato" de nuestros Términos y Condiciones Generales (Parte I.).
- Idioma del contrato, almacenamiento de texto del contrato
3.1. El idioma del contrato es el alemán.
3.2. El texto completo del contrato no será almacenado por nosotros. Antes de enviar el pedido, los datos del contrato se pueden imprimir o guardar electrónicamente a través de la función de impresión del navegador. Después de recibir el pedido por nuestra parte, los datos del pedido, la información legalmente prescrita para los contratos a distancia y los Términos y Condiciones Generales se le enviarán nuevamente por correo electrónico.
- Características esenciales de los bienes o servicios
Las características esenciales de los bienes y/o servicios se pueden encontrar en la oferta respectiva.
- Precios y condiciones de pago
5.1. Los precios indicados en las respectivas ofertas, así como los gastos de envío, representan los precios totales. Incluyen todos los componentes del precio, incluidos todos los impuestos aplicables.
5.2. Los gastos de envío incurridos no están incluidos en el precio de compra. Se pueden llamar a través de un botón designado correspondientemente en nuestro sitio web o en la oferta respectiva, se muestran por separado en el curso del proceso de pedido y deben ser asumidos por usted además, a menos que se haya prometido el envío gratuito.
5.3. Si la entrega se realiza a países fuera de la Unión Europea, podemos incurrir en costes adicionales de los que no somos responsables, como derechos de aduana, impuestos o tasas de transferencia de dinero (tasas de transferencia o tipo de cambio de las entidades de crédito), que correrán a cargo de usted. Cualquier costo incurrido por la transferencia de dinero también será asumido por usted en los casos en que la entrega se realice a un estado miembro de la UE, pero el pago se inició fuera de la Unión Europea.
5.5. A menos que se indique lo contrario para los métodos de pago individuales, las reclamaciones de pago del contrato celebrado deben pagarse inmediatamente.
- Condiciones de entrega
6.1. Los términos de entrega, la fecha de entrega y, si corresponde, las restricciones de entrega existentes se pueden encontrar en un botón designado correspondientemente en nuestro sitio web o en la oferta respectiva.
6.2 En la medida en que no se especifique ningún otro plazo en la oferta respectiva o en el botón designado correspondientemente, la entrega de los bienes tendrá lugar dentro de los 3-5 días posteriores a la conclusión del contrato (en el caso del pago anticipado acordado, sin embargo, solo después del momento de su instrucción de pago).
tener empresas de transporte encargadas o cualquier otra persona designada para llevar a cabo el envío.
- Responsabilidad legal por defectos
La responsabilidad por defectos se rige por la disposición "Garantía" en nuestros Términos y Condiciones Generales (Parte I).
última actualización: 07/12/2017
Derecho al desistimiento
Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona física que actúe con fines ajenos a su actividad comercial, empresarial, oficio o profesión.
Información sobre el derecho de desistimiento
Derecho legal de desistimiento
Tiene derecho a rescindir este contrato en un plazo de 14 días sin dar ningún motivo.
El periodo de desistimiento vencerá a los 14 días desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesión física del último bien o del último lote o pieza.
Para ejercer el derecho de desistimiento, complete de forma electrónica y envíe una declaración clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a través de un soporte duradero (por ejemplo, por correo electrónico).
Para cumplir con el plazo de desistimiento, basta con que envíe su comunicación relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.
Efectos del desistimiento
Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de envío (excepto los gastos adicionales que surjan si elige un tipo de envío que no sea el tipo de envío estándar más económico que ofrecemos).
Podemos hacer una deducción del reembolso por la pérdida de valor de cualquier bien suministrado, si la pérdida es el resultado de una manipulación innecesaria por su parte.
Efectuaremos el reembolso sin demoras indebidas y, a más tardar, 14 días después de que se nos informe de su decisión de rescindir este contrato.
Efectuaremos el reembolso utilizando el mismo medio de pago que utilizó para la transacción inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrirá en ningún cargo como resultado de dicho reembolso.
Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.
Deberá devolver los bienes o entregarlos a AHA-BUCH GmbH, Einbeck, Germany, sin demoras indebidas y, en cualquier caso, en un plazo máximo de 14 días a partir del día en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercancía antes de que venza el periodo de 14 días. Tendrá que asumir los gastos directos de devolución de los bienes. Usted solo es responsable de la disminución del valor de los bienes como resultado de una manipulación distinta a la necesaria para establecer la naturaleza, las características y el funcionamiento de los bienes.
Excepciones al derecho de desistimiento
El derecho de desistimiento no se aplica a lo siguiente:
- La entrega de periódicos, diarios o revistas, con la excepción de los contratos de suscripción; y
- El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, aceptó que podíamos empezar a entregarlo y que no podría desistir una vez iniciada la entrega.
Condiciones de envío
Enviamos su pedido después de recibirlos
para artículos disponibles las últimas 24 horas,
para artículos con suministro nocturno a más tardar 48 horas.
En caso de que necesitemos pedir un artículo a nuestro proveedor, nuestro tiempo de envío depende de la fecha de recepción de los artículos, pero los artículos se enviarán el mismo día.
Nuestro objetivo es enviar los artículos pedidos de la manera más rápida, pero también más eficiente y segura a nuestros clientes.
Privacidad y seguridad
Política de privacidad
A menos que se indique lo contrario a continuación, la provisión de sus datos personales no es requerida por ley o contrato, ni es necesaria para la celebración de un contrato. Usted no está obligado a proporcionar los datos. No proporcionar esto no tendrá consecuencias. Esto solo se aplica si no se proporciona otra información en las operaciones de procesamiento posteriores.
Recopilación, procesamiento y uso de datos personales para pedidos
Al realizar un pedido, recopilamos y utilizamos sus datos personales solo en la medida necesaria para cumplir y procesar su pedido y para procesar sus consultas. El suministro de los datos es necesario para la celebración del contrato. El hecho de no proporcionar esta disposición significa que no se puede celebrar ningún contrato. El procesamiento se lleva a cabo sobre la base del Art. 6 (1) lit. b GDPR y es necesario para la ejecución de un contrato con usted. Sus datos no serán cedidos a terceros sin su consentimiento expreso. Quedan excluidos de esto solo nuestros socios de servicio, que necesitamos para procesar la relación contractual o los proveedores de servicios que utilizamos en el contexto del procesamiento de pedidos. Además de los destinatarios nombrados en las respectivas cláusulas de esta declaración de protección de datos, estos son, por ejemplo, destinatarios de las siguientes categorías: proveedores de servicios de envío, proveedores de servicios de pago, proveedores de servicios de gestión de mercancías, proveedores de servicios para el procesamiento de pedidos, servidores web, proveedores de servicios de TI y comerciantes de dropshipping. En todos los casos, respetamos estrictamente los requisitos legales. El alcance de la transmisión de datos se limita al mínimo.
Derechos del interesado
Si se cumplen los requisitos legales, tiene los siguientes derechos en virtud de los artículos 15 a 20 del RGPD: Derecho a la información, a la corrección, a la eliminación, a la restricción del procesamiento, a la portabilidad de los datos. Además, de conformidad con el artículo 21 (1) del RGPD, tiene derecho a oponerse al procesamiento basado en el artículo 6 (1) f del RGPD y al procesamiento con fines de marketing directo.
Póngase en contacto con nosotros bajo petición. Los datos de contacto se pueden encontrar en nuestro pie de imprenta.
Derecho a presentar una reclamación ante la autoridad de control
De conformidad con el artículo 77 del RGPD, tiene derecho a presentar una reclamación ante la autoridad de control si considera que el tratamiento de sus datos personales no es lícito.
última actualización: 25/04/2018