Neuware -The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. Until the early 1960's these towers were of moderate size, probably not exceeding 76m (250ft) height. In this range, the structural safety and stability were not of primary concern because, the minimum wall thickness and reinforcement were sufficient to provide the required safety. It was not necessary to use very rigorous methods to analyse the problem. The analysis involved the following assumptions, i) flexural stresses were ignored (membrane tneory), ii) The geometry of the shell was assumed to be perfect and to be idealised as a set of straight sided conical frusta, and iii) The boundary conditions at the base were taken to be fixed or continuously hinged with full tangential restraint.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 228 pp. Englisch.

N� de ref. del art�culo 9783540167389

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo

Finite Element Analysis of Hyperbolic Cooling Towers

Editor

Springer Berlin Heidelberg, Springer Berlin Heidelberg Aug 1986

Fecha de publicaci�n

1986

Idioma

Ingl�s

ISBN 10

3540167382

ISBN 13

9783540167389

Encuadernaci�n

Taschenbuch

Estado

Neu

Cat�logos de vendedores

Acerca de

Sinopsis

The analysis of thin shells of revolution in general has always occupied an important place in the theory of structures, and recently the problem of hyperbolic cooling towers has attracted many investigators due to the wide use of such shells in industry. Until the early 1960's these towers were of moderate size, probably not exceeding 76m (250ft) height. In this range, the structural safety and stability were not of primary concern because, the minimum wall thickness and reinforcement were sufficient to provide the required safety. It was not necessary to use very rigorous methods to analyse the problem. The analysis involved the following assumptions, i) flexural stresses were ignored (membrane tneory), ii) The geometry of the shell was assumed to be perfect and to be idealised as a set of straight sided conical frusta, and iii) The boundary conditions at the base were taken to be fixed or continuously hinged with full tangential restraint.

Rese�a del editor

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Impressum Thorsten Retsch Buchversand Mimpf2000 Ober�lschnitz 16 95517 Emtmannsberg Deutschland Telefon: 09209-2023188 Email: mimpf2000@online.de USt-ID-Nr.: DE 235096871 Wir f�hren gebrauchte B�cher aus allen Sparten der Literatur

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

buchversandmimpf2000
Germany

Condiciones de venta y env�o

Condiciones de venta

Widerrufsbelehrung/ Muster-Widerrufsformular/
Allgemeine Gesch�ftsbedingungen und Kundeninformationen/ Datenschutzerkl�rung

Widerrufsrecht f�r Verbraucher
(Verbraucher ist jede nat�rliche Person, die ein Rechtsgesch�ft zu Zwecken abschlie�t, die �berwiegend weder ihrer gewerblichen noch ihrer selbstst�ndigen beruflichen T�tigkeit zugerechnet werden k�nnen.)

Widerrufsbelehrung

Widerrufsrecht
Sie haben das Recht, binnen 14 Tagen ohne Angabe von Gr�nden diesen Vertrag zu widerrufen.
Die Widerrufsfr...

M�s informaci�n

Derecho a cancelaci�n

Condiciones de env�o

Soweit in der Artikelbeschreibung keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Werktagen nach Vertragsschluss, bei Vorauszahlung erst nach Eingang des vollst�ndigen Kaufpreises und der Versandkosten. Alle Preise inkl. MwSt.

Tarifas de env�o de Alemania a Espa�a

Tarifas de env�o de Alemania a Espa�a
Cantidad del pedido	De 10 a 20 d�as h�biles	De 10 a 20 d�as h�biles
Primer art�culo	EUR 35.00	EUR 35.00

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor