Engineering Materials and Processes Desk Reference
Idioma: inglés
Editorial: Butterworth-Heinemann, 2009
- Tapa dura
- Usado
Librería: ThriftBooks-Dallas, Dallas, TX, Estados Unidos de AmericaThriftBooks-Dallas
Vendedor de IberLibro desde 2 de julio de 2009
Condición: Usado - Bueno
EUR 27,89
Cantidad disponible: 1 disponible
Añadir al carritoDescripción del artículo del vendedor
May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
N° de ref. del artículo G1856175863I4N00
- Título
- Engineering Materials and Processes Desk Reference
- Autor
- Ashby, Michael F.; Messler, Robert W.; Asthana, Rajiv
- Editorial
- Butterworth-Heinemann
- Año de publicación
- 2009
- Estado
- Very Good
- Sobrecubierta
- No Jacket
- Encuadernación
- Hardcover
- Idioma
- inglés
- ISBN 10
- 1856175863
- ISBN 13
- 9781856175869
- Peso del artículo
- 3,61 libras
“Sinopsis” puede pertenecer a otra edición de este título.
Acerca del autor
Rajiv Asthana, Ph.D., FASM, is Fulton and Edna Holtby Endowed Chair in manufacturing at the University of Wisconsin-Stout where he teaches in the manufacturing engineering program. He is Editor of Journal of Materials Engineering & Performance and on the editorial boards of Ceramics International and Materials Science and Engineering A. He has authored or coauthored five books, including Materials Science in Manufacturing (Elsevier) and 160 scientific publications, and co-edited Ceramic Integration and Joining Technologies (Wiley). His research interests include ceramic/metal joining, high-temperature capillarity and cast metal-matrix composites.
Dr. Edward Furlani holds BS degrees in both physics and electrical engineering, and MS and PhD degrees in theoretical physics from the State University of New York at Buffalo. He is currently a research associate in the research laboratories of the Eastman Kodak Company, which he joined in 1982. He has worked in the area of applied magnetics for over 15 years. His research in this area has involved the design and development of numerous magnetic devices and processes. He has extensive experience in the analysis and simulation of a broad range of magnetic applications including rare-earth permanent magnet structures, magnetic drives and suspensions, magnetic circuits, magnetic brush subsystems in the electrophotographic process, magnetic and magneto-optic recording, high-gradient magnetic separation, and electromechanical devices such as transducers, actuators and motors. His current research activity is in the area of microsystems and involves the analysis and simulation of various micro-electromechanical systems (MEMS) including light modulators, microactuators and microfluidic components. Dr. Furlani has authored over 40 publications in scientific journals and holds over 100 US patents.
After gaining his PhD in 1953, Professor Smallman spent five years at the Atomic Energy Research
Establishment at Harwell before returning to the University of Birmingham, where he became Professor
of Physical Metallurgy in 1964 and Feeney Professor and Head of the Department of Physical
Metallurgy and Science of Materials in 1969. He subsequently became Head of the amalgamated
Department of Metallurgy and Materials (1981), Dean of the Faculty of Science and Engineering, and
the first Dean of the newly created Engineering Faculty in 1985. For five years he wasVice-Principal
of the University (1987-92).
He has held visiting professorship appointments at the University of Stanford, Berkeley, Pennsylvania
(USA), New SouthWales (Australia), Hong Kong and Cape Town, and has received Honorary
Doctorates from the University of Novi Sad (Yugoslavia), University ofWales and Cranfield University.
His research work has been recognized by the award of the Sir George Beilby Gold Medal of the
Royal Institute of Chemistry and Institute of Metals (1969), the Rosenhain Medal of the Institute of
Metals for contributions to Physical Metallurgy (1972), the Platinum Medal, the premier medal of
the Institute of Materials (1989), and the Acta Materialia Gold Medal (2004).
Hewas elected a Fellowof the Royal Society (1986), a Fellowof the RoyalAcademy of Engineering
(1990), a Foreign Associate of the United States National Academy of Engineering (2005), and
appointed a Commander of the British Empire (CBE) in 1992. A former Council Member of the
Science and Engineering Research Council, he has been Vice-President of the Institute of Materials
and President of the Federated European Materials Societies. Since retirement he has been academic
consultant for a number of institutions both in the UK and overseas.
Professor Ngan obtained his PhD on electron microscopy of intermetallics in 1992 at the University
of Birmingham, under the supervision of Professor Ray Smallman and Professor Ian Jones. He then
carried out postdoctoral research at Oxford University on materials simulations under the supervision
of Professor David Pettifor. In 1993, he returned to the University of Hong Kong as a Lecturer in
Materials Science and Solid Mechanics, at the Department of Mechanical Engineering. In 2003,
he became Senior Lecturer and in 2006 Professor. His research interests include dislocation theory,
electron microscopy of materials and, more recently, nanomechanics. He has published over 120
refereed papers, mostly in international journals. He received a number of awards, including the
Williamson Prize (for being the top Engineering student in his undergraduate studies at the University
of Hong Kong), Thomas Turner Research Prize (for the quality of his PhD thesis at the University of
Birmingham), Outstanding Young Researcher Award at the University of Hong Kong, and in 2007
was awarded the Rosenhain Medal of the Institute of Materials, Minerals and Mining. He also held
visiting professorship appointments at Nanjing University and the Central Iron and Steel Research
Institute in Beijing, and in 2003, he was also awarded the Universitas 21 Fellowship to visit the
University of Auckland. He is active in conference organization and journal editorial work.
“Acerca de” puede pertenecer a otra edición de este título.
ThriftBooks-Dallas
Dallas, TX, Estados Unidos de America
Vendedor de IberLibro desde 2 de julio de 2009
Tarifas de envío en Estados Unidos de America
| Artículo | De 4 a 8 días hábiles | De 4 a 8 días hábiles |
|---|---|---|
| Primer artículo | EUR 0,00 | EUR 0,00 |
Métodos de pago
Descripción de la tienda
ThriftBooks is a fully independent seller of used books, having sold more than 160 million used and new books since we started in 2003. Each quality used book is sorted, graded, shelved and shipped by hand by our team of dedicated employees in our seven warehouses across the US. We have the best selection of books, in the right condition and format, at everyday low prices. We also have a dedicated, US-based Customer Service team, ranked in the top three by Newsweek for Best Customer Service in 2018 and 2019, so you can shop with confidence. We support and invest in our employees, appreciate and value our customers, and truly believe in the power of the written word to educate, energize, and engage readers of all ages and interests.…
Información empresarial del vendedor
Thrift Books Global LLC
18300 Cascade Ave S
Seattle, WA Estados Unidos de America 98188
Condiciones de venta
We guarantee each book that we send you. If you have any problems, please contact
our dedicated customer service department. They will do everything possible to
ensure you are happy with your order.
Derecho al desistimiento
Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona física que actúe con fines ajenos a su actividad comercial, empresarial, oficio o profesión.
Información sobre el derecho de desistimiento
Derecho legal de desistimiento
Tiene derecho a rescindir este contrato en un plazo de 14 días sin dar ningún motivo.
El periodo de desistimiento vencerá a los 14 días desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesión física del último bien o del último lote o pieza.
Para ejercer el derecho de desistimiento, complete de forma electrónica y envíe una declaración clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a través de un soporte duradero (por ejemplo, por correo electrónico).
Para cumplir con el plazo de desistimiento, basta con que envíe su comunicación relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.
Efectos del desistimiento
Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de envío (excepto los gastos adicionales que surjan si elige un tipo de envío que no sea el tipo de envío estándar más económico que ofrecemos).
Podemos hacer una deducción del reembolso por la pérdida de valor de cualquier bien suministrado, si la pérdida es el resultado de una manipulación innecesaria por su parte.
Efectuaremos el reembolso sin demoras indebidas y, a más tardar, 14 días después de que se nos informe de su decisión de rescindir este contrato.
Efectuaremos el reembolso utilizando el mismo medio de pago que utilizó para la transacción inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrirá en ningún cargo como resultado de dicho reembolso.
Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.
Deberá devolver los bienes o entregarlos a ThriftBooks-Dallas, Dallas, Texas, U.S.A., sin demoras indebidas y, en cualquier caso, en un plazo máximo de 14 días a partir del día en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercancía antes de que venza el periodo de 14 días. Tendrá que asumir los gastos directos de devolución de los bienes. Usted solo es responsable de la disminución del valor de los bienes como resultado de una manipulación distinta a la necesaria para establecer la naturaleza, las características y el funcionamiento de los bienes.
Excepciones al derecho de desistimiento
El derecho de desistimiento no se aplica a lo siguiente:
- La entrega de periódicos, diarios o revistas, con la excepción de los contratos de suscripción; y
- El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, aceptó que podíamos empezar a entregarlo y que no podría desistir una vez iniciada la entrega.
Condiciones de envío
All domestic Standard and Expedited shipments are distributed from our warehouses by OSM, then handed off to the USPS for final delivery.
2-Day Shipping is delivered by FedEx, which does not deliver to PO boxes.
International shipments are tendered to the local postal service in the destination country for final delivery – we do not use courier services for international deliveries.