Druck auf Anfrage Neuware - Printed after ordering - This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paidto PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor's and Master's programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course 'Fundamentals of Electric Drives' in the third bachelor. Part 3 is used for the course 'Controlled Electrical Drives' in the first master, while Part 4 is used in the specialised master on electrical energy.

N� de ref. del art�culo 9783319892030

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo: Electrical Machines and Drives : Fundamentals and Advanced Modelling
Editor: Springer
Fecha de publicaci�n: 2019
Idioma: Ingl�s
ISBN 10: 3319892037
ISBN 13: 9783319892030
Encuadernaci�n: Taschenbuch
Estado: Neu
Dimensiones: 235�mil�metros de ancho por 155 de alto por 41 de largo
Peso: 1136 gramos

Acerca de

Sinopsis

This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paid to PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor’s and Master’s programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course ’Fundamentals of Electric Drives’ in the third bachelor. Part 3 is used for the course ’Controlled Electrical Drives’ in the first master, while Part 4 is used in the specialised master on electrical energy.

De la contraportada

This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paid to PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor s and Master s programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course Fundamentals of Electric Drives in the third bachelor. Part 3 is used for the course Controlled Electrical Drives in the first master, while Part 4 is used in the specialised master on electrical energy.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Das Unternehmen AHA-BUCH GmbH: Seit der Gr�ndung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisg�nstig wie m�glich ihren B�cherwunsch zu erf�llen. Unsere Firma besch�ftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine W�nsche! Auf �ber 3700 m2 Fl�che haben wir �ber 100.000 B�cher, Modernes Antiquariat und Spiele auf Lager.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

AHA-BUCH GmbH
Garlebsen 48, Einbeck, 37574, Germany

Condiciones de venta y env�o

Condiciones de venta

T�rminos y Condiciones Generales e Informaci�n del Cliente / Pol�tica de Privacidad

I. T�rminos y Condiciones Generales

� 1 Disposiciones b�sicas

(1)Los siguientes t�rminos y condiciones se aplican a todos los contratos que celebre con nosotros como proveedor (AHA-BUCH GmbH) a trav�s de las plataformas de Internet AbeBooks y/o ZVAB. A menos que se acuerde lo contrario, se objetar� la inclusi�n de cualquiera de sus propios t�rminos y condiciones utilizados por usted.
(2)Un consumidor en el sentid...

M�s informaci�n

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a AHA-BUCH GmbH, Einbeck, Germany, sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

Enviamos su pedido despu�s de recibirlos
para art�culos disponibles las �ltimas 24 horas,
para art�culos con suministro nocturno a m�s tardar 48 horas.
En caso de que necesitemos pedir un art�culo a nuestro proveedor, nuestro tiempo de env�o depende de la fecha de recepci�n de los art�culos, pero los art�culos se enviar�n el mismo d�a.

Nuestro objetivo es enviar los art�culos pedidos de la manera m�s r�pida, pero tambi�n m�s eficiente y segura a nuestros clientes.

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 30 a 40 d�as h�biles	De 7 a 14 d�as h�biles
Primer art�culo	EUR 65.68	EUR 75.68

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor