It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

N� de ref. del art�culo 0323858325-8-1

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo: Elastomer Blends and Composites: Principles, Characterization, Advances, and Applications
Editor: Elsevier (edition 1)
Fecha de publicaci�n: 2022
Idioma: Ingl�s
ISBN 10: 0323858325
ISBN 13: 9780323858328
Encuadernaci�n: Paperback
Edici�n: 1.
Estado: Very Good

Acerca de

Sinopsis

Elastomer Blends and Composites: Principles, Characterization, Advances, and Applications presents the latest developments in natural rubber and synthetic rubber-based blends and nanocomposites, with a focus on current trends, future directions and state-of-the-art applications. The book introduces the fundamentals of natural rubber and synthetic rubbers, outlining synthesis, structure, properties, challenges and potential applications. This is followed by detailed coverage of compounding and formulations, manufacturing methods, and preparation of elastomer-based blends, composites, and nanocomposites. The next section of the book focuses on properties and characterization, examining elasticity, spectroscopy, barrier properties, and rheological, morphological, mechanical, thermal, and viscoelastic behavior, and more.

This is a highly valuable resource for researchers and advanced students in rubber (or elastomer) science, polymer blends, composites, polymer science, and materials science and engineering, as well as engineers, technologists, and scientists working with rubber-based materials for advanced applications.

Guides the reader through the manufacturing, properties, characterization and latest innovations in elastomer blends and composites
Addresses aging and degradation behavior, lifecycle analysis, and recycling of rubber-based materials
Explores novel applications of rubber blends and composites in areas such as automotive, aerospace, medicine and engineering

Acerca de los autores

Dr. Sanjay Mavinkere Rangappa is a Principal Research Scientist and Associate Professor at King Mongkut 's University of Technology North Bangkok, Thailand. He also serves as an Advisor within the President' s Office for University Promotion and Development towards International goals. Dr. Rangappa is the Executive Editor of Book Cluster: Fiber Science and Fibrous Composite Materials ( Elsevier), a former Associate Editor of Heliyon (Materials Science), and an Associate Editor of Frontier Materials Journals. He acts as a Board Member and Editor for various international journals in materials science and composites. He has reviewed over 250 international journals, including for Nature, Elsevier, Springer, and Wiley, as well as book proposals and conference submissions. He has published more than 425 articles in top- tier peer- reviewed journals indexed by SCI/Scopus, 13 editorial issues, 100 book chapters, and 70 books as an Editor with leading publishers such as Elsevier, Springer, Taylor & Francis, and Wiley. Additionally, he authored 3 books published by Elsevier and has presented research at numerous national and international conferences. Over 25 of his articles are highly cited in journals like the Journal of Cleaner Production and Carbohydrate Polymers. Dr. Rangappa is the lead editor for several special issues and has a Google Scholar citation count exceeding 39, 000, with an H- index of 100 and An i 100- Index of 475. He holds 1 US Patent, 11 UK Design Patents, 1 Thailand Patent, and 5 Indian patents. He has delivered keynote and invited talks globally, including Russia, South Africa, Malaysia, and India. Currently, he is an Academic Visitor at The University of Portsmouth, UK (2024), with upcoming visiting positions at various Malaysian and Indonesian universities from 2024 to 2027. His research focuses on Natural fiber composites, Polymer Composites, and Advanced Material Technology. He received the ‘Top Peer Reviewer 2019’ award from Publons, and the KMUTNB ‘Outstanding Young Researcher’ (2020) and' Outstanding Researcher’ (2021) awards. Recognized as one of the top 1% most- cited scientists by Stanford University (2019-2025), he ranks 5th in Thailand overall and 2nd In the Polymers category for 2023. He is also listed among the ‘Top 100 Scientists’ in Thailand by AD Scientific Index.

Prof. Jyotishkumar Parameswaranpillai is currently the Director of AU – Sophisticated Testing and Instrumentation Center, Alliance University, Bengaluru, India, and a Professor at the Department of Science, Alliance University, Bengaluru, India. He has received numerous prestigious awards, including the DST INSPIRE Faculty Award from the Government of India and the Best Faculty Awards from KMUTNB, Thailand and Alliance University India.

Prof. Dr.-Ing. habil. Suchart Siengchin is a former President of King Mongkut’s University of Technology North Bangkok and currently serves as the Director of TechnoPark at the same university. He earned his Dipl.-Ing. in Mechanical Engineering from the University of Applied Sciences Giessen/Friedberg, Germany in 1999, followed by an M.Sc. in Polymer Technology from the University of Applied Sciences Aalen in 2002, and another M.Sc. in Material Science from Erlangen-N�rnberg University in 2004. He obtained his Doctor of Philosophy in Engineering (Dr.-Ing.) from the Institute for Composite Materials at the University of Kaiserslautern in 2008, including postdoctoral research at Kaiserslautern University and Purdue University's School of Materials Engineering. In 2016, he received his habilitation from Chemnitz University in Saxony, Germany. In 2024, he was honored as an Honorary Fellow by RWTH Aachen University. He has also served as a Lecturer in Production and Material Engineering at the Sirindhorn International Thai-German Graduate School of Engineering, KMUTNB, and has been a full Professor and President of KMUTNB. He received the Outstanding Researcher Award in 2010, 2012, and 2013 at KMUTNB. His research focuses on Polymer Processing and Composite Materials. He is the Editor-in-Chief of the journal Applied Science and Engineering Progress, a Q1 indexed journal on Scopus, and has authored over 600 peer-reviewed journal articles, 15 editorial contributions, more than 100 book chapters, one authored book, and over 50 edited books. He has presented at more than 70 international and national conferences related to Materials Science and Engineering. Recognized as one of the world’s top 2% scientists by Stanford University for 2021- 2022, he received the National Excellence Researcher Award (Engineering and Research Industry) from Thailand's National Research Council in 2021, and has been listed as a Highly Cited Researcher in 2025 by Clarivate.

Togay Ozbakkaloglu is a Professor at the Ingram School of Engineering of Texas State University, USA. He has published over 250 peer-reviewed research papers in these areas, including over 125 journal articles that appeared in leading disciplinary journals and received over 4000 citations (Scopus). He is Associate Editor for the ASCE Journal of Structural Engineering (the foremost structural engineering journal), Heliyon, Frontiers in Built Environment, and Australian Journal of Civil Engineering. He also serves on the Editorial Board of 12 international journals, including the ASCE Journal of Composites for Construction, the leading journal in his immediate research field of structural applications of FRP composites.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

BooksRun helps save money on books. Founded in 2014, we are an independent online bookseller with thousands of happy customers and top ratings. With millions of titles in stock, from fiction to textbooks, we have the best book selection and prices 90% below the list price. We ship all orders the same day or the next business day. Expedited shipping arrives in 2 - 5 business days. Returns are accepted within 30 days of delivery. We are committed to providing each customer with the highest standard of customer service.� Please carefully check the book?s description and condition before ordering. If you have any questions or issues, please contact us first. Thank you for choosing BooksRun!

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

AZ Texts LLC
228 Park Ave S Suite 38827, New York, NY, 10003, U.S.A.

Condiciones de venta y env�o

Condiciones de venta

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a BooksRun, Philadelphia, Pennsylvania, U.S.A., sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

Tarifas de env�o en Estados Unidos de America

Tarifas de env�o en Estados Unidos de America
Cantidad del pedido	De 3 a 8 d�as h�biles	De 3 a 6 d�as h�biles
Primer art�culo	EUR 0.00	EUR 3.50

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.