Databook of Nucleating Agents. Este artículo no está disponible.Databook of Nucleating Agents

Databook of nucleating agents contains data on the most critical products in use today. Production of approximately 30% of nucleating agents included in the previous edition was discontinued, and they were replaced by new additives developed in the last 6 years. Two groups of data are included: data for chemical compounds used for the manufacture of nucleating agents (data included come from many available sources and contain extensive reference) and commercial products (data from a single supplier of material). The second edition contains revised data and includes commercial nucleating agents that are currently available.

The information on each nucleating agent included in the Databook of Nucleating Agents is divided into five sections: General information, Physical properties, Health and safety, Ecological properties, and Use & Performance. The data belong to over 100 data fields, which accommodate a variety of data available in source publications. The description of each section below gives more detail on the composition of information.

In General information section, the following data are included: name, CAS #, EC #, Acronym, Chemical category, Common name, Common synonym, IUPAC name, Molecular structure, Molecular formula, Molecular mass, Masterbatch, Mixture, RTECS number, Moisture contents, Purity, and Product contents.

Physical-chemical properties section contains data on State, Odor, Color, Brightness, Whiteness, Acid #, Average particle size, Boiling point, Melting point, Density, Relative permittivity, Melt flow rate, Gas production, Expansion, Heat of combustion, Heat of fusion, Henry's law constant, Oil absorption, Loss on ignition, pH, Refractive index, Surface tension, Solubility in water and solvents, Specific surface area, Thermal conductivity, Vapor density, Vapor pressure, Viscosity, Volatility, Volume resistivity, and pKa1/pKa2.

Health and safety section contains data on Flash point, Flash point method, Autoignition temperature, Explosive LEL, Explosive UEL, NFPA Health, NFPA Flammability, NFPA Reactivity, HMIS Health, HMIS Fire, HMIS Reactivity, HMIS Personal protection, UN number, UN Risk Phrases, R, UN Safety Phrases, S, DOT Hazard Class, UN/NA hazard class, UN packaging group, ICAO/IATA Class, IMDG Class, Proper shipping name, Rat oral LD50, Mouse oral LD50, Rabbit dermal LD50, Inhalation rat LC50, Route of entry, Skin irritation, Eye irritation, Ingestion, Inhalation, First aid: eyes, skin, and inhalation, Carcinogenicity by ACGIH, IARC, NTP, and OSHA, Mutagenicity, and TLV - TWA 8h (ACGIH, NIOSH, OSHA)

Ecological properties section contains data on Biodegradation probability, Aquatic toxicity LC50 (Rainbow trout, Bluegill sunfish, Fathead minnow, Sheepshead minnow, and Daphnia magna), Bioconcentration factor, Biological, Chemical, and Theoretical Oxygen Demand, and Partition coefficient (log Kow and log Pow).

 

Use & performance section contains information on Manufacturer, Outstanding properties, Recommended for polymers, Recommended for products, Concentration used Processes, Process temperature, and Food contact.

This book is a must to have for manufacturers of nucleating agents, manufacturers of products containing nucleating agents designed for various purposes, regulating bodies, academia, and research laboratories. The databook contains information that is complete, timely, up-to-date, and useful in numerous fields of application and for thousands of manufactures and products.

The Databook of Nucleating Agents is best used in combination with the Handbook of Nucleating Agents. Both books do not overlap but complement each other.

George Wypych has a Ph.D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research and development. He has published 18 books, 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability and the development of sealants and coatings.

Anna Wypych studied chemical engineering and polymer chemistry and obtained an M.Sc in chemical engineering. Her professional expertise includes both teaching and research & development. She specializes in polymer additives for PVC and other polymers, and evaluates their effect on health and environment.