The first volume produced the needful cultural background on the body; it described the body and its components in use on most kinds of cars and industrial vehicles: the quantity of drawings that are presented allows the reader to familiarize with the design features and to understand functions, design motivations and fabrication feasibility, in view of the existing production processes.

The purpose of this second volume is to explain the links which exist between satisfying the needs of the customer (either driver or passenger) and the specifications for vehicle design, and between the specifications for vehicle system and components. For this study a complete vehicle system must be considered, including, according to the nature of functions that will be discussed, more component classes than considered in Volume I, and, sometimes, also part of the chassis and the powertrain.

These two books about the vehicle body may be added to those about the chassis and are part of a series sponsored by ATA (the Italian automotive engineers association) on the subject of automotive engineering; they follow the first book, published in 2005 in Italian only, about automotive transmission.

They cover automotive engineering from every aspect and are the result of a five-year collaboration between the Polytechnical University of Turin and the University of Naples on automotive engineering.

Acerca del autor

Lorenzo Morello received his degree in Mechanical Automotive Engineering in 1968 at the Politecnico of Turin. He immediately began his career at the Politecnico as Assistant of Machine Design and Technologies.

Leaving the Politecnico in 1971, went to work at a branch of Fiat dedicated to vehicle studies, one that has been joined to the new Research Centre in 1976. He participates in the development of cars and experimental prototypes for the ESV US Program. He has also developed mathematical models for vehicle suspensions and road holding simulations.

Since 1973 he has been involved in a major project for the development of mathematical modeIs of the vehicle, to address the product policies of the company in facing the first energy crisis; as part of this activity he began the development of a new automatic transmission for reduced fuel consumption and a small direct injection diesel engine to be used on automobiles.

Dr. Morello was appointed manager of the chassisdepartment of the Vehicle Research Unit and has coordinated the development of many research prototypes, such as electric cars, off-road vehicles, trucks and buses. He was appointed manager of the same Research Unit in 1977 and has been leading a group of about 100 design engineers, dedicated to the development of prototypes. A new urban bus with unitized thin steel sheet body, with spot welded joints, a commercial vehicle that will start production later, a small lightweight urban car, under contract from the National Research Council, and a hybrid car, under contract from the US Department of Energy, were developed in this period of time.

He took responsibility of the Engine Research Unit in 1980; this group, of about 200 people, was primarily dedicated to the development of new car engines. He has managed the development of many petrol engines according to the principle of high turbulence fast combustion. A direct injection diesel engine for cars, many turbocharged pre-chamber diesel engines, a modular two cylinder car engine and many other modified prototypes. He was appointed Director of Product Development in 1983; this position includes all applied research activities on Vehicle Products of Fiat Group. The Division included about 400 people, addressed to power train, chassis and bodies studies as well as prototype construction.

Dr. Morello joined Fiat Auto in 1983, to take responsibility for the development of new automotive petrol engines and the direct injection diesel (the first in the world for automobile applications). He was appointed Director for Powertrain Engineering in 1987; the objective of this group was to develop all engines produced by Fiat Auto brands. The most important activity in this period was the development of the new engine family to be produced in Pratola Serra, which included more than 20 different engines.

At the end of his career, he returned to vehicle development in 1994, as director for Vehicle Engineering; this group was addressed to designing and testing bodies, chassis components, electric and electronic systems, wind tunnels, safety center and other facilities.

Dr. Morello retired in 1999 and started a new activity as consultant to the strategic planning of Elasis, a new company in the Fiat Group, entirely dedicated to vehicle applied research.

Along with Fiat Research Center he participated in the planning of courses for the new Faculty on Automotive Engineering of the Politecnico of Turin, and prepared related lecture notes. He was contract professor of Vehicle System Design and has been contract professor of Automotive Transmission Design since 2001 at the Politecnico of Turin and the University of Naples.

Relevant publications

Progetto della trasmissione meccanica (Automotive Transmission Design), Levrotto e Bella, Torino 2005.

With Giancarlo Genta, The Automotive Chassis, to be published by Springer.

6 Articles published by Ingegneria dell'Autoveicolo, Magazine of the Italian Automotive Engineers Association, between 2006 and 2008, about automotive product evolution.

4 Articles published by Autotecnica, Italian magazine for automotive engineers, between 2007 and 2008, about car suspensions design.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

We specialise in General Interest Books from South Asian countries.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

BOOKS AND PERIODICALS AGENCY LTD
90 Barnet Gate Lane, Barnet, EN5 2AX, United Kingdom

Condiciones de venta y env�o

Condiciones de venta

Returns accepted if you are not satisfied with the Service or Book.

Derecho al desistimiento

Si es un consumidor, puede rescindir el contrato de acuerdo con lo siguiente. Por consumidor se entiende cualquier persona f�sica que act�e con fines ajenos a su actividad comercial, empresarial, oficio o profesi�n.

Informaci�n sobre el derecho de desistimiento

Derecho legal de desistimiento

Tiene derecho a rescindir este contrato en un plazo de 14 d�as sin dar ning�n motivo.

El periodo de desistimiento vencer� a los 14 d�as desde que usted, o un tercero que no sea el transportista e indicado por usted, adquiera la posesi�n f�sica del �ltimo bien o del �ltimo lote o pieza.

Para ejercer el derecho de desistimiento, complete de forma electr�nica y env�e una declaraci�n clara en nuestro sitio web, desde "Mis compras" en "Mi cuenta". Le enviaremos sin demora un acuse de recibo de dicho desistimiento a trav�s de un soporte duradero (por ejemplo, por correo electr�nico).

Para cumplir con el plazo de desistimiento, basta con que env�e su comunicaci�n relativa al ejercicio del derecho de desistimiento antes de que venza el periodo de desistimiento.

Efectos del desistimiento

Si rescinde este contrato, le reembolsaremos todos los pagos que hayamos recibido de usted, incluidos los gastos de env�o (excepto los gastos adicionales que surjan si elige un tipo de env�o que no sea el tipo de env�o est�ndar m�s econ�mico que ofrecemos).

Podemos hacer una deducci�n del reembolso por la p�rdida de valor de cualquier bien suministrado, si la p�rdida es el resultado de una manipulaci�n innecesaria por su parte.

Efectuaremos el reembolso sin demoras indebidas y, a m�s tardar, 14 d�as despu�s de que se nos informe de su decisi�n de rescindir este contrato.

Efectuaremos el reembolso utilizando el mismo medio de pago que utiliz� para la transacci�n inicial, a menos que haya acordado expresamente lo contrario; en cualquier caso, no incurrir� en ning�n cargo como resultado de dicho reembolso.

Podremos retener el reembolso hasta que hayamos recibido los bienes o hasta que nos haya presentado una prueba de que los ha devuelto, lo que ocurra primero.

Deber� devolver los bienes o entregarlos a Majestic Books, Hounslow, United Kingdom, sin demoras indebidas y, en cualquier caso, en un plazo m�ximo de 14 d�as a partir del d�a en que nos comunique su desistimiento del presente contrato. El plazo se cumple si devuelve la mercanc�a antes de que venza el periodo de 14 d�as. Tendr� que asumir los gastos directos de devoluci�n de los bienes. Usted solo es responsable de la disminuci�n del valor de los bienes como resultado de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento

El derecho de desistimiento no se aplica a lo siguiente:

La entrega de peri�dicos, diarios o revistas, con la excepci�n de los contratos de suscripci�n; y
El suministro de contenido digital que no se proporcione en un soporte tangible (por ejemplo, en un CD o DVD) si, al hacer el pedido, acept� que pod�amos empezar a entregarlo y que no podr�a desistir una vez iniciada la entrega.

Condiciones de env�o

Best packaging and fast delivery

Tarifas de env�o de Reino Unido a Estados Unidos de America

Tarifas de env�o de Reino Unido a Estados Unidos de America
Cantidad del pedido	De 14 a 45 d�as h�biles	De 5 a 10 d�as h�biles
Primer art�culo	EUR 7.63	EUR 11.56

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.