Zustand: Hervorragend | Seiten: 660 | Sprache: Englisch | Produktart: B�cher | This book presents selected peer-reviewed contributions from the 2019 International Conference on �Physics and Mechanics of New Materials and Their Applications�, PHENMA 2019 (Hanoi, Vietnam, 7�10 November, 2019), divided into four scientific themes: processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystals, materials and composites with special properties. It presents nanotechnology approaches, modern environmentally friendly techniques and physical-chemical and mechanical studies of the structural-sensitive and physical�mechanical properties of materials. The obtained results are based on new achievements in material sciences and computational approaches, methods and algorithms (in particular, finite-element and finite-difference modeling) applied to the solution of different technological, mechanical and physical problems. The obtained results have a significant interest fortheory, modeling and test of advanced materials. Other results are devoted to promising devices demonstrating high accuracy, longevity and new opportunities to work effectively under critical temperatures and high pressures, in aggressive media, etc. These devices demonstrate improved comparative characteristics, caused by developed materials and composites, allowing investigation of physio-mechanical processes and phenomena based on scientific and technological progress.

N� de ref. del art�culo 36587217/1

Contactar al vendedor

Denunciar este art�culo

Detalles bibliogr�ficos

T�tulo

Advanced Materials : Proceedings of the International Conference on "Physics and Mechanics of New Materials and Their Applications", PHENMA 2019

Editor

Springer

Fecha de publicaci�n

2020

Idioma

Ingl�s

ISBN 10

3030451194

ISBN 13

9783030451196

Encuadernaci�n

Encuadernaci�n de tapa dura

Estado

Hervorragend

Cat�logos de vendedores

B�cher

Acerca de

Sinopsis

This book presents selected peer-reviewed contributions from the 2019 International Conference on "Physics and Mechanics of New Materials and Their Applications", PHENMA 2019 (Hanoi, Vietnam, 7-10 November, 2019), divided into four scientific themes: processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystals, materials and composites with special properties. It presents nanotechnology approaches, modern environmentally friendly techniques and physical-chemical and mechanical studies of the structural-sensitive and physical-mechanical properties of materials. The obtained results are based on new achievements in material sciences and computational approaches, methods and algorithms (in particular, finite-element and finite-difference modeling) applied to the solution of different technological, mechanical and physical problems. The obtained results have a significant interest for theory, modeling and test of advanced materials. Other results are devoted to promising devices demonstrating high accuracy, longevity and new opportunities to work effectively under critical temperatures and high pressures, in aggressive media, etc. These devices demonstrate improved comparative characteristics, caused by developed materials and composites, allowing investigation of physio-mechanical processes and phenomena based on scientific and technological progress.

Acerca del autor

Dr. Sc. Ivan A. Parinov received his M.Sc. in Mechanics from Rostov State University, Mechanics and Mathematics Department in 1978 (Rostov-on-Don, Russia), his Ph.D. in Physics and Mathematics from Rostov State University in 1990 and his Dr. Sc. in Techniques from South-Russian State Technical University in 2008. He is a corresponding member of the Russian Engineering Academy (2014) and since 1978 is working in the I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute of the Southern Federal University (former Rostov State University) where he is currently Chief Research Fellow. From 1993 to 2019, he headed the Research Grants and Programs from the Soros Foundation, Collaboration for Basic Science and Education (COBASE, USA), Russian Foundation for Basic Research (14 grants), Russian Ministry for Science and Education (9 grants and scientific proposals). He has published over 350 scientific-technical publications, among them there are 30 monographs (in particular, 9books published with Springer and 15 books with Nova Science Publishers). He currently holds 14 Russian and Soviet patents. His scientific achievements have been recognized with over 30 gold medals and special awards from European and Asian exhibitions. Since 1994 Parinov has been a reviewer for the Zentralblatt f�r Mathematik (Germany) and Mathematical Reviews (USA) (over 450 reviews). He has held positions as INTAS expert (2004), FP-7 expert (2010), ERA.NET RUS expert (2011, 2015), expert for the Russian Academy of Science (since 2016), the Russian Foundation for Basic Research expert (since 2017), the Russian Science Foundation expert (since 2019) and Russian Federal expert in the area of science and technology (2012-2021). He is the winner of a competition of the Russian Department of Education and Science (2014-2016 and 2017-2019) for “Organization of Fulfillment of the Scientific Researches”. I. A. Parinov is active member of the New York Academy of Sciences (1994), and member ofthe American Mathematical Society (since 1996), the European Mathematical Society (from 1998) and The Indian Structural Integrity Society (since 2016). He holds the honorary title “Honorary Member of All-Russian Society of Inventors and Rationalizers” (2008). His research interests include R&D of novel materials and composites (in particular, high-temperature superconductors and ferro-piezoelectrics), fracture mechanics and strength physics, acoustic emission, optics, mathematical modeling, different applications of advanced materials and composites.

Dr. Shun-Hsyung Chang received his Ph.D. in electrical engineering from National Sun Yat-Sen University, Taiwan in 1990. Afterward, he served as an Associate Professor and has been a Full Professor since 1997 in the Department of Electrical Engineering at National Taiwan Ocean University, Keelung, Taiwan, where he was also Chairman from 1998 to 2003. He had served as the Vice President of National Kaohsiung Marine University, Kaohsiung, Taiwan, from 2003 to 2006, and is currently a professor in the Department of Microelectronic Engineering at the National Kaohsiung University of Science and Technology (former National Kaohsiung Marine University). He was head of 3 grants in 2010-2017 within joint programs of the Ministry of Science and Technology of Taiwan and the Russian Foundation for Basic Research. He has published over 250 scientific-technical publications, among which are 12 monographs. In 1984, he was granted The Creative Youth prize by the Ministry of Education. He received the Long-Term Paper Award, organized by Acer Incorporated, in 1994, 1996 and 1998. He and his graduate students won the Third Prize of Graduate Team in TI-Taiwan 1994 DSP Design Championship. He also obtained the Distinguished Award in the contest of Special Topic of Communication System in graduate division held by the Ministry of Education in 2000. He contributes greatly to editorship. He was the Editor-in-Chief of the Journal ofMarine Science and Technology 1998-2001, of which he is presently an Editor. He is currently the Editor-in-Chief of the Journal of Ocean and Underwater Technology 2008-2019. His research interests include electrical engineering; electronics and communication engineering; signal, image, video and array processing; underwater and acoustic communication; underwater acoustics; Kalman filtering and detection.

Dr. Sc. Banh Tien Long received a Mechanical Engineering Engineer degree in 1973, a Doctor of Engineering in 1977, and a Doctor of Science and Technology in 1991 in the Czech Republic. He received the title of Associate Professor in 1996, and the title of Professor in 2002. He was assigned the title of People's Teacher in 2010 by the President of Vietnam. Currently, he is a member of the National Council of Science and Technology Policy, and the National Council member, for the title promotion of State Professor of Vietnam. He is The Chair of the Council for the National title promotion of Professor of Mechanical and transport Engineering. He is Professor and Senior Lecturer at Hanoi University of Science and Technology, a member of the board of accreditation of education quality, Editor-in-Chief of Science and Technology Journal of 7 technical universities of Vietnam, Chair of the Academic Council of Hung Yen University of Education and Technology. He is President of the Vietnam Association for Science Editing (VASE), President of the Council of Asian Science Editors, and Vice President of Vietnam Federation of Mechanical Engineering Associations. As a permanent Vice Minister of the Ministry of Education and Training of Vietnam, he was in charge of higher education and professional education, national entering university exams, education quality accreditation, and the reform program “University Education 2006-2020” (HERA). He was a Director of higher education projects I (ODA), career orientation program in higher education (POHE). Before becomingthe Deputy Minister of Education and Training, he was the Director of the Higher Education Department under the Ministry of Education and Training of Vietnam, the Vice President of Hanoi University of Science and Technology (HUST), Vice-Dean, Head of Department of Material machining and industrial instruments, Hanoi University of Science and Technology. His research interests include materials science, mechanical engineering, manufacturing technologies, mechanical and dynamic industry, industrial materials and tool processing.

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

Descripci�n de la librer�a

Seit �ber 30 Jahren handeln wir mit B�chern. Begonnen hat alles als kleiner Fachbuchhandel in Berlin. Heute sind wir spezialisiert auf den An- und Verkauf gebrauchter B�cher. Noch immer liegt unser Fokus dabei auf den Kategorien: Fachbuch und englischsprachige Literatur. Hinzu kommen B�cher aus allen anderen Genres, wie Belletristik, Biografien oder Kinderb�cher. Unser oberstes Ziel ist dabei die Weiterverwendung von Dingen und die Schonung von Ressourcen. Neben dem Ankauf von privaten B�chern oder Haushaltsaufl�sungen kaufen wir bundesweit komplette Bibliotheken und Buchbest�nde von Institutionen auf, um diese nachhaltig ein weiteres Mal auf den Markt zu bringen. Parallel dazu bietet Buchpark die M�glichkeit, gro�e Mengen einzulagern. Ganze Bibliotheken und umfangreiche Buchbest�nde werden von uns professionell auf Qualit�tsmerkmale hin untersucht und sorgf�ltig f�r den Onlinehandel aufbereitet. Wir schenken B�chern ein zweites Leben.

Ver la p�gina web de la librer�a

Informaci�n empresarial del vendedor

Buchpark GmbH
Kr�gerweg 1, Trebbin, 14959, Germany

Condiciones de venta y env�o

Condiciones de venta

Derecho a cancelaci�n

Si eres un consumidor puedes cancelar el presente contrato de acuerdo con lo indicado a continuaci�n. Son consumidores las personas f�sicas que act�en con un prop�sito ajeno a su actividad comercial, empresarial, oficio o profesi�n.

Documento de informaci�n al consumidor y usuario sobre el desistimiento

Derecho de desistimiento:

Tienes derecho a desistir del presente contrato en un plazo de 14 d�as naturales sin necesidad de justificaci�n.

El plazo de desistimiento expirar� a los 14 d�as naturales del d�a en que t� o un tercero que hayas indicado, distinto del transportista, adquiera la posesi�n material del �ltimo bien, componente o pieza.

Para ejercer el derecho de desistimiento, deber�s notificarnos a Buchpark, Unit B, Enterprise House, Waldeck Road, SL6 8BR, Maidenhead, Berkshire, United Kingdom, +49 03381 79 76 585, de tu decisi�n de desistir del contrato a trav�s de una declaraci�n inequ�voca (por ejemplo, una carta enviada por correo postal, fax o correo electr�nico). Podr�s utilizar el modelo de formulario de desistimiento que figura a continuaci�n, aunque su uso no es obligatorio. Tienes asimismo la opci�n de cumplimentar y enviar electr�nicamente el modelo de formulario de desistimiento o cualquier otra declaraci�n inequ�voca a trav�s de nuestro sitio web a "Mis pedidos" en "Mi cuenta". Si recurres a esta opci�n, te comunicaremos sin demora en un soporte duradero (por ejemplo, por correo electr�nico) la recepci�n de dicho desistimiento.

Para cumplir el plazo de desistimiento, basta con que la comunicaci�n relativa al ejercicio por tu parte de este derecho sea enviada antes de que venza el plazo correspondiente.

Consecuencias del desistimiento:

En caso de desistimiento por tu parte, te devolveremos todos los pagos recibidos de ti, incluidos los gastos de entrega (con la excepci�n de los gastos adicionales resultantes de la elecci�n por tu parte de una modalidad de entrega diferente a la modalidad menos costosa de entrega ordinaria que ofrezcamos) sin ninguna demora indebida y, en todo caso, a m�s tardar 14 d�as naturales a partir de la fecha en la que se nos informes de tu decisi�n de desistir del presente contrato. Procederemos a efectuar dicho reembolso utilizando el mismo medio de pago empleado por ti para la transacci�n inicial, a no ser que hayas dispuesto expresamente lo contrario; en todo caso, no incurrir�s en ning�n gasto como consecuencia del reembolso.

Podremos retenerte el reembolso hasta haber recibido los bienes, o hasta que hayas presentado una prueba de la devoluci�n de los mismos, seg�n qu� condici�n se cumpla primero. Deber�s devolvernos o entregarnos directamente los bienes a Buchpark, Unit B, Enterprise House, Waldeck Road, SL6 8BR, Maidenhead, Berkshire, United Kingdom, +49 03381 79 76 585, sin ninguna demora indebida y, en cualquier caso, a m�s tardar en el plazo de 14 d�as naturales a partir de la fecha en que nos comuniques tu decisi�n de desistimiento del contrato. Se considerar� cumplido el plazo si efect�as la devoluci�n de los bienes antes de que haya concluido dicho plazo. Deber�s asumir el coste directo de devoluci�n de los bienes. Solo ser�s responsable de la disminuci�n de valor de los bienes resultante de una manipulaci�n distinta a la necesaria para establecer la naturaleza, las caracter�sticas y el funcionamiento de los bienes.

Excepciones al derecho de desistimiento:

La entrega de peri�dicos, publicaciones especializadas o revistas con la excepci�n de contratos de suscripci�n; y
La entrega de contenido digital (incluyendo apps, MP3, etc.) que no hubiera sido entregado en un medio tangible (por ejemplo: CD o DVD), si al realizar tu pedido has aceptado que podemos proceder al env�o del producto y que no resulta posible su cancelaci�n una vez comienza la entrega.

Modelo de formulario de desistimiento

(S�lo debe cumplimentar y enviar el presente formulario si desea desistir del contrato)

A la atenci�n de: (Buchpark, Unit B, Enterprise House, Waldeck Road, SL6 8BR, Maidenhead, Berkshire, United Kingdom, +49 03381 79 76 585)

Por la presente le comunico/comunicamos* que desisto de mi/desistimos de nuestro* contrato de venta del siguiente bien/prestaci�n del siguiente servicio*

Pedido el/recibido el*:

Nombre del consumidor y usuario o de los consumidores y usuarios:

Domicilio del consumidor y usuario o de los consumidores y usuarios:

Firma del consumidor y usuario o de los consumidores y usuarios (solo si el presente formulario se presenta en papel):

Fecha:

* Eliminar en su caso

Condiciones de env�o

Tarifas de env�o de Alemania a Estados Unidos de America

Tarifas de env�o de Alemania a Estados Unidos de America
Cantidad del pedido	De 60 a 60 d�as h�biles	De 60 a 60 d�as h�biles
Primer art�culo	EUR 105.00	EUR 130.00

Los plazos de entrega los establecen los vendedores y var�an seg�n el transportista y la ubicaci�n. Los pedidos que pasan por la aduana pueden sufrir retrasos y los compradores son responsables de los aranceles o tarifas asociadas. Los vendedores pueden ponerse en contacto con usted en relaci�n con cargos adicionales para cubrir cualquier aumento en los costes de env�o de los art�culos.

Informaci�n detallada sobre el vendedor