Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Gibson, Ian; Rosen, David; Stucker, Brent
ISBN 10: 1493921126 ISBN 13: 9781493921126
Editorial: Springer, 2014
Usado
Encuadernación de tapa dura
Librería:
Goodwill of Silicon Valley, SAN JOSE, CA, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Vendedor de AbeBooks desde 28 de junio de 2024
Este artículo en concreto ya no está disponible.
Descripción
Descripción:
Supports Goodwill of Silicon Valley job training programs. The cover and pages are in Good condition! Any other included accessories are also in Good condition showing use. Use can include some highlighting and writing, page and cover creases as well as other types visible wear. N° de ref. del artículo GWSVV.1493921126.G
Sinopsis:
This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems.
This book also:
Reflects recent developments and trends and adheres to the ASTM, SI, and other standards
Includes chapters on automotive technology, aerospace technology and low-cost AM technologies
Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Acerca del autor:
Dr. Ian Gibson is a Professor of Industrial Design at Deakin University.
Dr. Brent Stucker is a Professor and Clark Chair of Computer Aided Engineering at the University of Louisville.
Dr. David W. Rosen is Associate Chair for Administration and a Professor at the Georgia Institute of Technology.
"Sobre este título" puede pertenecer a otra edición de este libro.
Detalles bibliográficos
Título: Additive Manufacturing Technologies: 3D ...
Editorial: Springer
Año de publicación: 2014
Encuadernación: Encuadernación de tapa dura
Condición: good
Edición: 2ª Edición
Los mejores resultados en AbeBooks
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: HPB-Red, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Acceptable. Connecting readers with great books since 1972. Used textbooks may not include companion materials such as access codes, etc. May have condition issues including wear and notes/highlighting. We ship orders daily and Customer Service is our top priority! Nº de ref. del artículo: S_402278108
Comprar usado
EUR 12,53
EUR 3,21 shipping
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: HPB-Red, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority! Nº de ref. del artículo: S_437935411
Comprar usado
EUR 12,53
EUR 3,21 shipping
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: FirstClassBooks, Little Rock, AR, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: Good. Used books cannot guarantee unused access codes or working CD's! Nº de ref. del artículo: FAY-218-985
Comprar usado
EUR 19,25
EUR 3,42 shipping
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 5 disponibles
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: Anybook.com, Lincoln, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1050grams, ISBN:9781493921126. Nº de ref. del artículo: 9749533
Comprar usado
EUR 76,89
EUR 15,48 shipping
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: Anybook.com, Lincoln, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1050grams, ISBN:9781493921126. Nº de ref. del artículo: 9749532
Comprar usado
EUR 76,89
EUR 15,48 shipping
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: Anybook.com, Lincoln, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1050grams, ISBN:9781493921126. Nº de ref. del artículo: 9749531
Comprar usado
EUR 76,89
EUR 15,48 shipping
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen del vendedor
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing : 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Publicado por
Springer, Berlin, Springer New York, 2014
ISBN 10: 1493921126
ISBN 13: 9781493921126
Antiguo o usado
Tapa dura
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Gebundene Ausgabe. Condición: Sehr gut. Gebraucht - Sehr gut sg - umschlag leicht berieben / beschädigt, ungelesenes mängelexemplar, gestempelt - This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered. Nº de ref. del artículo: INF1000365723
Comprar usado
EUR 96,83
EUR 64,96 shipping
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
Librería: Toscana Books, AUSTIN, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: new. Excellent Condition.Excels in customer satisfaction, prompt replies, and quality checks. Nº de ref. del artículo: Scanned1493921126
Comprar nuevo
EUR 242,06
EUR 3,68 shipping
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 1 disponibles