Spacecraft Systems Engineering Handbook: Design, Integration, and Modern Practice - Tapa blanda

Sinopsis

The engineering knowledge required to design a spacecraft is spread across dozens of specialist textbooks, standards documents, and conference proceedings — each excellent within its discipline, none connecting the whole.

This handbook closes that gap.

Twenty chapters develop every major spacecraft subsystem at working-engineer depth — governing equations derived, not just stated; numerical examples carried to computed results; and cross-references that trace every output to the inputs it feeds in every adjacent chapter. A single spacecraft — a 1,500 kg Earth observation satellite in Sun-synchronous orbit at 500 km — runs as the worked example throughout, so every formula lands on real numbers and every result is traceable across the full design.

Coverage includes:

• Space environment: radiation dose, plasma charging, atomic oxygen flux, thermal cycling, and debris risk — and how each constrains every subsystem that follows
• Orbital mechanics and mission analysis: vis-viva equation, eclipse fraction, nodal regression, constellation design
• Chemical and electric propulsion sizing: specific impulse trades, propellant mass computation, and the power–transfer time tradeoff for all-electric platforms
• Electrical power systems: solar array sizing and degradation, battery management, power conditioning architecture, eclipse and sunlit mode budgets
• Attitude determination and control: disturbance torque analysis, sensor and actuator selection, linearised control laws
• Structures: launch load cases, natural frequency requirements, material selection, ECSS-compliant design margins
• Thermal control: coating selection, MLI sizing, radiator area, heater allocation, eclipse–sunlit cycling
• Telecommunications: link budget development, Friis transmission equation, noise temperature, uplink and downlink margin
• Telemetry, command, and on-board data handling; EMC and ECSS-compliant verification; AIV test sequencing and model philosophy
• Small satellite and CubeSat systems engineering at genuine design depth — subsystem selection under real mass, power, and volume constraints
• Model-based systems engineering: SysML architecture modelling, interface control, requirement traceability, digital twin integration

Both heritage-qualified and commercial new space practice — reusable launch vehicles, rideshare, mega-constellation operations, software-defined ground infrastructure — are addressed throughout. ECSS and CCSDS standards provide the governing framework where they apply.

For engineers entering spacecraft programmes or transitioning into systems roles; graduate students seeking a comprehensive systems-level reference; and practitioners who need one structured resource that connects every discipline and every decision.

"Sinopsis" puede pertenecer a otra edición de este libro.