Build Smart Home Devices with ESP32: Create Practical Wi Fi Sensors, Actuators, and Automation Projects with Arduino C++ - Tapa blanda

Sinopsis

What if you could build your own smart home devices instead of relying entirely on expensive, ready-made products?

With the ESP32 microcontroller, Arduino C++, and a few affordable electronic components, you can create connected devices that monitor your environment, control electrical loads, and communicate with your home automation system.

Build Smart Home Devices with ESP32 is a practical guide to turning smart home ideas into working projects. Whether you are getting started with microcontrollers or looking to expand your electronics and programming skills, this book walks you through the essential concepts, components, and techniques needed to build useful Wi-Fi-enabled devices.

Learn by building practical projects

Rather than focusing only on theory, this book connects programming concepts with real hardware applications. You will learn how to configure an ESP32, connect sensors, write Arduino C++ code, build web-based controls, and connect devices to an automation platform.

Inside, you will learn how to:

• Set up the ESP32 development environment and work with GPIO pins, buttons, LEDs, and electronic components.
• Program responsive devices using Arduino C++, including non-blocking code and state-based control.
• Connect devices to Wi-Fi and create web interfaces for monitoring readings and controlling outputs.
• Work with temperature, humidity, pressure, light, and other environmental sensors.
• Control electrical loads using relay modules and MOSFETs, with attention to safe design and appropriate hardware.
• Use MQTT messaging to exchange device readings, commands, and status information.
• Integrate ESP32 projects with Home Assistant for dashboards and home automation routines.
• Build an environmental monitoring system and a multi-channel Wi-Fi relay controller.
• Improve reliability through power management, sensor-error handling, Wi-Fi recovery, and manual overrides.
• Apply practical security measures, update firmware over the air, troubleshoot problems, and maintain your devices.

Designed for practical learning

This book is suitable for beginner and intermediate electronics enthusiasts, makers, students, hobbyist programmers, and developers interested in connected hardware. Basic programming experience can help, but the material is organized to introduce important concepts as you work through the projects.

You do not need to begin with a fully equipped smart home. You can start with an ESP32 board and a small selection of components, develop your skills step by step, and build toward more capable connected systems.

Build devices that do more than simply connect

A useful smart home device must do more than respond to a command when everything is working perfectly. It should also handle connection failures, unexpected sensor readings, power interruptions, and other real-world challenges. This guide emphasizes responsive code, dependable operation, sensible security, and manual control where it matters.

If you want to move beyond basic microcontroller exercises and start building practical smart home sensors, controllers, and automation projects, Build Smart Home Devices with ESP32 gives you a hands-on path from the fundamentals to complete connected-device projects.

"Sinopsis" puede pertenecer a otra edición de este libro.