CAD/CAM in Practice: A Manager's Guide to Understanding and Using CAD/CAM

0 valoración promedio
( 0 valoraciones por Goodreads )
 
9789401171229: CAD/CAM in Practice: A Manager's Guide to Understanding and Using CAD/CAM
Ver todas las copias de esta edición ISBN.
 
 
Reseña del editor:

Little more than a decade ago computer-aided design and manufacture (CAD/CAM) was a very esoteric field indeed, not one that was of much practical concern to a manager or industrialist unless his business was on the scale of, say, a major automobile manufacturer or in a field of high technology such as aerospace. Like so much else, this situation was revo­ lutionized by the invention of the silicon chip, the arrival of the micro­ processor and the dramatic fall in the cost of computer hardware. Today, CAD/CAM has spread down the market, and down the price scale, to the point at which it is both a feasible and an affordable technology for a wide range of small-and medium-sized companies in areas as various as architec­ ture and general engineering, plastic moulding and consumer electronics. But the explosion - there is no other word for it - in the variety and capabilities of CAD/CAM systems, and their spectacular climb to the top of the hi-tech hit parade, has placed the potential purchaser and user of the new technology in a difficult position. On the one hand he is assured, not least by the manufacturers of CAD/CAM equipment, that a failure to invest in it will leave his company stranded in the industrial Stone Age.

"Sobre este título" puede pertenecer a otra edición de este libro.

Comprar nuevo Ver libro

Gastos de envío: EUR 4,39
De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de envío

Añadir al carrito

Los mejores resultados en AbeBooks

1.

Medland, A.J.
Publicado por Springer (2016)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Paperback Cantidad disponible: 1
Impresión bajo demanda
Librería
Ria Christie Collections
(Uxbridge, Reino Unido)
Valoración
[?]

Descripción Springer, 2016. Paperback. Condición: New. PRINT ON DEMAND Book; New; Publication Year 2016; Not Signed; Fast Shipping from the UK. No. book. Nº de ref. del artículo: ria9789401171229_lsuk

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 79,40
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 4,39
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

2.

Publicado por Springer, Netherlands (2012)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Paperback Cantidad disponible: 10
Impresión bajo demanda
Librería
The Book Depository
(London, Reino Unido)
Valoración
[?]

Descripción Springer, Netherlands, 2012. Paperback. Condición: New. Language: English . Brand New Book ***** Print on Demand *****.Little more than a decade ago computer-aided design and manufacture (CAD/CAM) was a very esoteric field indeed, not one that was of much practical concern to a manager or industrialist unless his business was on the scale of, say, a major automobile manufacturer or in a field of high technology such as aerospace. Like so much else, this situation was revo- lutionized by the invention of the silicon chip, the arrival of the micro- processor and the dramatic fall in the cost of computer hardware. Today, CAD/CAM has spread down the market, and down the price scale, to the point at which it is both a feasible and an affordable technology for a wide range of small-and medium-sized companies in areas as various as architec- ture and general engineering, plastic moulding and consumer electronics. But the explosion - there is no other word for it - in the variety and capabilities of CAD/CAM systems, and their spectacular climb to the top of the hi-tech hit parade, has placed the potential purchaser and user of the new technology in a difficult position. On the one hand he is assured, not least by the manufacturers of CAD/CAM equipment, that a failure to invest in it will leave his company stranded in the industrial Stone Age. Softcover reprint of the original 1st ed. 1986. Nº de ref. del artículo: AAV9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 85,46
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

3.

Publicado por Springer, Netherlands (2012)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Paperback Cantidad disponible: 10
Librería
Book Depository hard to find
(London, Reino Unido)
Valoración
[?]

Descripción Springer, Netherlands, 2012. Paperback. Condición: New. Language: English . This book usually ship within 10-15 business days and we will endeavor to dispatch orders quicker than this where possible. Brand New Book. Little more than a decade ago computer-aided design and manufacture (CAD/CAM) was a very esoteric field indeed, not one that was of much practical concern to a manager or industrialist unless his business was on the scale of, say, a major automobile manufacturer or in a field of high technology such as aerospace. Like so much else, this situation was revo- lutionized by the invention of the silicon chip, the arrival of the micro- processor and the dramatic fall in the cost of computer hardware. Today, CAD/CAM has spread down the market, and down the price scale, to the point at which it is both a feasible and an affordable technology for a wide range of small-and medium-sized companies in areas as various as architec- ture and general engineering, plastic moulding and consumer electronics. But the explosion - there is no other word for it - in the variety and capabilities of CAD/CAM systems, and their spectacular climb to the top of the hi-tech hit parade, has placed the potential purchaser and user of the new technology in a difficult position. On the one hand he is assured, not least by the manufacturers of CAD/CAM equipment, that a failure to invest in it will leave his company stranded in the industrial Stone Age. Softcover reprint of the original 1st ed. 1986. Nº de ref. del artículo: LIE9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 86,16
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

4.

Publicado por Springer, Netherlands (2012)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Paperback Cantidad disponible: 10
Impresión bajo demanda
Librería
Book Depository International
(London, Reino Unido)
Valoración
[?]

Descripción Springer, Netherlands, 2012. Paperback. Condición: New. Language: English . Brand New Book ***** Print on Demand *****. Little more than a decade ago computer-aided design and manufacture (CAD/CAM) was a very esoteric field indeed, not one that was of much practical concern to a manager or industrialist unless his business was on the scale of, say, a major automobile manufacturer or in a field of high technology such as aerospace. Like so much else, this situation was revo- lutionized by the invention of the silicon chip, the arrival of the micro- processor and the dramatic fall in the cost of computer hardware. Today, CAD/CAM has spread down the market, and down the price scale, to the point at which it is both a feasible and an affordable technology for a wide range of small-and medium-sized companies in areas as various as architec- ture and general engineering, plastic moulding and consumer electronics. But the explosion - there is no other word for it - in the variety and capabilities of CAD/CAM systems, and their spectacular climb to the top of the hi-tech hit parade, has placed the potential purchaser and user of the new technology in a difficult position. On the one hand he is assured, not least by the manufacturers of CAD/CAM equipment, that a failure to invest in it will leave his company stranded in the industrial Stone Age. Softcover reprint of the original 1st ed. 1986. Nº de ref. del artículo: AAV9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 86,49
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

5.

A. J. Medland
Publicado por Springer (2012)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Cantidad disponible: > 20
Impresión bajo demanda
Librería
Pbshop
(Wood Dale, IL, Estados Unidos de America)
Valoración
[?]

Descripción Springer, 2012. PAP. Condición: New. New Book. Shipped from US within 10 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Nº de ref. del artículo: IQ-9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 87,72
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,25
A Estados Unidos de America
Destinos, gastos y plazos de envío

6.

A.J. MEDLAND
Publicado por Springer (2012)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Paperback Cantidad disponible: 1
Librería
Herb Tandree Philosophy Books
(Stroud, GLOS, Reino Unido)
Valoración
[?]

Descripción Springer, 2012. Paperback. Condición: NEW. 9789401171229 This listing is a new book, a title currently in-print which we order directly and immediately from the publisher. For all enquiries, please contact Herb Tandree Philosophy Books directly - customer service is our primary goal. Nº de ref. del artículo: HTANDREE0817959

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 81,91
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 9,07
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

7.

A. J. Medland
Publicado por Springer (2012)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Cantidad disponible: > 20
Impresión bajo demanda
Librería
Books2Anywhere
(Fairford, GLOS, Reino Unido)
Valoración
[?]

Descripción Springer, 2012. PAP. Condición: New. New Book. Delivered from our UK warehouse in 3 to 5 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Nº de ref. del artículo: LQ-9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 83,57
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 10,20
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

8.

Publicado por Springer (2013)
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Tapa blanda Cantidad disponible: 15
Impresión bajo demanda
Librería
Valoración
[?]

Descripción Springer, 2013. Condición: New. This item is printed on demand for shipment within 3 working days. Nº de ref. del artículo: LP9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 101,66
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 2,99
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

9.

Publicado por Springer
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Paperback Cantidad disponible: > 20
Librería
BuySomeBooks
(Las Vegas, NV, Estados Unidos de America)
Valoración
[?]

Descripción Springer. Paperback. Condición: New. 232 pages. Dimensions: 9.2in. x 6.1in. x 0.5in.Little more than a decade ago computer-aided design and manufacture (CADCAM) was a very esoteric field indeed, not one that was of much practical concern to a manager or industrialist unless his business was on the scale of, say, a major automobile manufacturer or in a field of high technology such as aerospace. Like so much else, this situation was revo lutionized by the invention of the silicon chip, the arrival of the micro processor and the dramatic fall in the cost of computer hardware. Today, CADCAM has spread down the market, and down the price scale, to the point at which it is both a feasible and an affordable technology for a wide range of small-and medium-sized companies in areas as various as architec ture and general engineering, plastic moulding and consumer electronics. But the explosion - there is no other word for it - in the variety and capabilities of CADCAM systems, and their spectacular climb to the top of the hi-tech hit parade, has placed the potential purchaser and user of the new technology in a difficult position. On the one hand he is assured, not least by the manufacturers of CADCAM equipment, that a failure to invest in it will leave his company stranded in the industrial Stone Age. This item ships from multiple locations. Your book may arrive from Roseburg,OR, La Vergne,TN. Paperback. Nº de ref. del artículo: 9789401171229

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 110,55
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

10.

Publicado por Springer
ISBN 10: 940117122X ISBN 13: 9789401171229
Nuevo Tapa blanda Cantidad disponible: 1
Librería
Ohmsoft LLC
(Lake Forest, IL, Estados Unidos de America)
Valoración
[?]

Descripción Springer. Condición: New. Paperback. Worldwide shipping. FREE fast shipping inside USA (express 2-3 day delivery also available). Tracking service included. Ships from United States of America. Nº de ref. del artículo: 940117122X

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 115,52
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

Existen otras copia(s) de este libro

Ver todos los resultados de su búsqueda