Artículos relacionados a SURFACE ROUGHNESS PREDICTION OF AL ALLOY USING ANN...

SURFACE ROUGHNESS PREDICTION OF AL ALLOY USING ANN IN CNC TURNING: Using Ann in CNC Turning to Predict Surface Roughness of an Al Alloy RDE-40 and H-15 - Tapa blanda

SRINIVASAN, D.R.; RAJENDRAPRASAD, S.

 
9786203582741: SURFACE ROUGHNESS PREDICTION OF AL ALLOY USING ANN IN CNC TURNING: Using Ann in CNC Turning to Predict Surface Roughness of an Al Alloy RDE-40 and H-15
Tapa blanda
ISBN 10: 6203582743 ISBN 13: 9786203582741
Editorial: LAP LAMBERT Academic Publishing, 2021

Sinopsis

Machining of advance aerospace materials like alloys of aluminum has posed a lot of challenges with the existing cutting tools higher the metal feed cutting rate lower is the surface finish and lower is metal feed cutting rate better is the surface finish. Also surface finish has played a prominent role in the machining of materials as it determines the number of steps required for process of aluminum alloy from the initial stage i.e. raw material stage to finished product. The experimental investigation was conducted by varying different operating parameters like spindle speed, feed rate and depth of cut. The obtained results were taken as inputs and by using Artificial Neural Network to obtain optimized solution of different conflicting parameters in terms of higher feed rate, maximum depth of cut and higher spindle speed accompanied by best surface finish.

"Sinopsis" puede pertenecer a otra edición de este libro.

Editorial
LAP LAMBERT Academic Publishing
Año de publicación
2021
Idioma
Inglés
ISBN 10 
6203582743
ISBN 13 
9786203582741
Encuadernación
Tapa blanda
Número de páginas
64
Contacto del fabricante
no disponible
Persona responsable
no disponible