Artículos relacionados a Titanium Alloy Foams For Biomedical Applications
Sinopsis
Titanium and its alloy based foam have gained a lot of interest for research in recent years as implants in biomedical applications. This book deals about titanium alloy foams prepared by powder metallurgy. The foams prepared by using titanium, copper and silver powders. Space holder material wax was used in two different sizes: 200-500 microns and 500-1000 microns in order to observe the effect of different pore size on mechanical properties and density. The sintered samples were examined in terms of relative density, percent porosity, pores size and distribution, compressive strength and flexural strength. The results show that percent porosity of sintered samples in case of copper and silver alloyed titanium foam is less than pure titanium foams due to higher compressibility of silver and copper powders. Compressive strength and flexural strength of alloy foam is higher than pure titanium due to solid solution strengthening.
"Sinopsis" puede pertenecer a otra edición de este libro.
Comprar nuevo
Ver este artículo
EUR 59,90
EUR 23,00 gastos de envío desde Alemania a Estados Unidos de America
Destinos, gastos y plazos de envíoResultados de la búsqueda para Titanium Alloy Foams For Biomedical Applications
Imagen del vendedor
Titanium Alloy Foams For Biomedical Applications
Publicado por
Scholars' Press Okt 2021, 2021
ISBN 10: 6138961846
ISBN 13: 9786138961840
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Titanium and its alloy based foam have gained a lot of interest for research in recent years as implants in biomedical applications. This book deals about titanium alloy foams prepared by powder metallurgy. The foams prepared by using titanium, copper and silver powders. Space holder material wax was used in two different sizes: 200-500 microns and 500-1000 microns in order to observe the effect of different pore size on mechanical properties and density. The sintered samples were examined in terms of relative density, percent porosity, pores size and distribution, compressive strength and flexural strength. The results show that percent porosity of sintered samples in case of copper and silver alloyed titanium foam is less than pure titanium foams due to higher compressibility of silver and copper powders. Compressive strength and flexural strength of alloy foam is higher than pure titanium due to solid solution strengthening. 92 pp. Englisch. Nº de ref. del artículo: 9786138961840
Gastos de envío:
EUR 23,00
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 2 disponibles
Imagen de archivo
Sharma:Titanium Alloy Foams For Biomedi
Librería: Books Puddle, New York, NY, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: New. Nº de ref. del artículo: 26397278134
Cantidad disponible: 4 disponibles
Imagen de archivo
Sharma:Titanium Alloy Foams For Biomedi
Impresión bajo demandaLibrería: Majestic Books, Hounslow, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Print on Demand. Nº de ref. del artículo: 400180329
Gastos de envío:
EUR 7,51
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 4 disponibles
Imagen de archivo
Sharma:Titanium Alloy Foams For Biomedi
Impresión bajo demandaLibrería: Biblios, Frankfurt am main, HESSE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. PRINT ON DEMAND. Nº de ref. del artículo: 18397278140
Gastos de envío:
EUR 9,95
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 4 disponibles
Imagen del vendedor
Titanium Alloy Foams For Biomedical Applications
Impresión bajo demandaLibrería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Sharma AbhishekAbhishek Sharma, received his M. Tech Degree in Stress & Vibration Analysis in the Department of Mechanical Engineering from Maulana Azad National Institute Technology, Bhopal, M.P. His research interest is in the fiel. Nº de ref. del artículo: 523228569
Gastos de envío:
EUR 48,99
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Titanium Alloy Foams For Biomedical Applications
Publicado por
Scholars' Press Okt 2021, 2021
ISBN 10: 6138961846
ISBN 13: 9786138961840
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Neuware -Titanium and its alloy based foam have gained a lot of interest for research in recent years as implants in biomedical applications. This book deals about titanium alloy foams prepared by powder metallurgy. The foams prepared by using titanium, copper and silver powders. Space holder material wax was used in two different sizes: 200-500 microns and 500-1000 microns in order to observe the effect of different pore size on mechanical properties and density. The sintered samples were examined in terms of relative density, percent porosity, pores size and distribution, compressive strength and flexural strength. The results show that percent porosity of sintered samples in case of copper and silver alloyed titanium foam is less than pure titanium foams due to higher compressibility of silver and copper powders. Compressive strength and flexural strength of alloy foam is higher than pure titanium due to solid solution strengthening.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 92 pp. Englisch. Nº de ref. del artículo: 9786138961840
Gastos de envío:
EUR 60,00
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 2 disponibles
Imagen del vendedor
Titanium Alloy Foams For Biomedical Applications
Impresión bajo demandaLibrería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Titanium and its alloy based foam have gained a lot of interest for research in recent years as implants in biomedical applications. This book deals about titanium alloy foams prepared by powder metallurgy. The foams prepared by using titanium, copper and silver powders. Space holder material wax was used in two different sizes: 200-500 microns and 500-1000 microns in order to observe the effect of different pore size on mechanical properties and density. The sintered samples were examined in terms of relative density, percent porosity, pores size and distribution, compressive strength and flexural strength. The results show that percent porosity of sintered samples in case of copper and silver alloyed titanium foam is less than pure titanium foams due to higher compressibility of silver and copper powders. Compressive strength and flexural strength of alloy foam is higher than pure titanium due to solid solution strengthening. Nº de ref. del artículo: 9786138961840
Gastos de envío:
EUR 60,78
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles