Artículos relacionados a Material Point Method: Particle-in-cell, Finite element...
Material Point Method: Particle-in-cell, Finite element method, Partial differential equation, Meshfree methods, Geotechnical engineering, Soil mechanics - Tapa blanda
Sinopsis
Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. The Material Point Method, is an extension from the Particle-in-cell Method in computational fluid dynamics to computational solid dynamics, and is a Finite element method-based particle method. It is primarily used for multiphase simulations, because of the ease of detecting contact without inter-penetration. It can also be used as an alternative to dynamic FEM methods to simulate large material deformations, because there is no re-meshing required by the MPM. In the MPM, Lagrangian point masses, or material points, are moved through a Eulerian background mesh. At the end of each calculation cycle, a ‘convective’ step occurs, in which the mesh is reset to its original position, while material points remain in their current positions. There are two key differences between the PIC and MPM. The first one is that the MPM is formulated in the weak form similar to that for the FEM so that the FEM and MPM could be combined together for large-scale simulations.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. The Material Point Method, is an extension from the Particle-in-cell Method in computational fluid dynamics to computational solid dynamics, and is a Finite element method-based particle method. It is primarily used for multiphase simulations, because of the ease of detecting contact without inter-penetration. It can also be used as an alternative to dynamic FEM methods to simulate large material deformations, because there is no re-meshing required by the MPM. In the MPM, Lagrangian point masses, or material points, are moved through a Eulerian background mesh. At the end of each calculation cycle, a ‘convective’ step occurs, in which the mesh is reset to its original position, while material points remain in their current positions. There are two key differences between the PIC and MPM. The first one is that the MPM is formulated in the weak form similar to that for the FEM so that the FEM and MPM could be combined together for large-scale simulations.
"Sobre este título" puede pertenecer a otra edición de este libro.
Resultados de la búsqueda para Material Point Method: Particle-in-cell, Finite element...
Imagen de archivo
Material Point Method
Publicado por
Omniscriptum Mär 2026, 2026
ISBN 10: 6132696288
ISBN 13: 9786132696281
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware 68 pp. Englisch. Nº de ref. del artículo: 9786132696281
Comprar nuevo
EUR 116,00
Envío por EUR 23,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 2 disponibles
Imagen del vendedor
Material Point Method : Particle-in-cell, Finite element method, Partial differential equation, Meshfree methods, Geotechnical engineering, Soil mechanics
Impresión bajo demandaLibrería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Please note that the content of this book primarily consists of articlesavailable from Wikipedia or other free sources online. The MaterialPoint Method, is an extension from the Particle-in-cell Method incomputational fluid dynamics to computational solid dynamics, and is aFinite element method-based particle method. It is primarily used formultiphase simulations, because of the ease of detecting contact withoutinter-penetration. It can also be used as an alternative to dynamic FEMmethods to simulate large material deformations, because there is nore-meshing required by the MPM. In the MPM, Lagrangian point masses, ormaterial points, are moved through a Eulerian background mesh. At theend of each calculation cycle, a 'convective' step occurs, in which themesh is reset to its original position, while material points remain intheir current positions. There are two key differences between the PICand MPM. The first one is that the MPM is formulated in the weak formsimilar to that for the FEM so that the FEM and MPM could be combinedtogether for large-scale simulations. Nº de ref. del artículo: 9786132696281
Comprar nuevo
EUR 117,39
Envío por EUR 35,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen del vendedor
Material Point Method
Publicado por
Omniscriptum Mär 2026, 2026
ISBN 10: 6132696288
ISBN 13: 9786132696281
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Please note that the content of this book primarily consists of articlesavailable from Wikipedia or other free sources online. The MaterialPoint Method, is an extension from the Particle-in-cell Method incomputational fluid dynamics to computational solid dynamics, and is aFinite element method-based particle method. It is primarily used formultiphase simulations, because of the ease of detecting contact withoutinter-penetration. It can also be used as an alternative to dynamic FEMmethods to simulate large material deformations, because there is nore-meshing required by the MPM. In the MPM, Lagrangian point masses, ormaterial points, are moved through a Eulerian background mesh. At theend of each calculation cycle, a 'convective' step occurs, in which themesh is reset to its original position, while material points remain intheir current positions. There are two key differences between the PICand MPM. The first one is that the MPM is formulated in the weak formsimilar to that for the FEM so that the FEM and MPM could be combinedtogether for large-scale simulations.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 68 pp. Englisch. Nº de ref. del artículo: 9786132696281
Comprar nuevo
EUR 116,00
Envío por EUR 60,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles