Artículos relacionados a Plastic Cooling During Injection Molding: Simulation,...

Plastic Cooling During Injection Molding: Simulation, Analysis and Optimization (Omn.Univ.Europ.) - Tapa blanda

HASSAN, Hamdy

 
9786131554360: Plastic Cooling During Injection Molding: Simulation, Analysis and Optimization (Omn.Univ.Europ.)
Tapa blanda
ISBN 10: 6131554366 ISBN 13: 9786131554360
Editorial: Editions universitaires europeennes, 2010

Sinopsis

Injection molding represents the most important process for producing precision plastic parts with large quantities, complex gemoetry and low cost. Cooling process during injection molding is of great importance for plastic produced by injection molding because it affects extensively on the cycle time and the productivity, the accuracy and the quality of final product. This book aims to study and optimize the cooling process during the injection molding to obtain optimum product quality at low cost and highly production rate. The effect of cooling system on the heat transfer through the injection molding process, the cooling and solidification of the polymer, the shrinkage rate of the polymer material and the temperature distribution through the mold and the polymer is carried out. Moreover, the effect of different process parameters (polymer properties, injection temperature, filling time, coolant flow rate, gate location, etc.) on the cooling and solidification of the polymer material and on the filling process is studied. Also, improvement techniques are proposed to improve the filling and cooling process of the plastic during injection molding.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

Injection molding represents the most important process for producing precision plastic parts with large quantities, complex gemoetry and low cost. Cooling process during injection molding is of great importance for plastic produced by injection molding because it affects extensively on the cycle time and the productivity, the accuracy and the quality of final product. This book aims to study and optimize the cooling process during the injection molding to obtain optimum product quality at low cost and highly production rate. The effect of cooling system on the heat transfer through the injection molding process, the cooling and solidification of the polymer, the shrinkage rate of the polymer material and the temperature distribution through the mold and the polymer is carried out. Moreover, the effect of different process parameters (polymer properties, injection temperature, filling time, coolant flow rate, gate location, etc.) on the cooling and solidification of the polymer material and on the filling process is studied. Also, improvement techniques are proposed to improve the filling and cooling process of the plastic during injection molding.

Biografía del autor

Hamdy HASSAN recieved his M.Sc.in mechanical Engineering, Assiut University, Egypt(2002)and his P.hD. in injection molding, Bordeaux1 University, France(2009). His domain of research includes heat transfer, Compressible and non compressible fluid,non Newtonian fluid,solidification, two phase flow, electronic cooling and injection molding.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Editions universitaires europeennes
Año de publicación
2010
Idioma
Inglés
ISBN 10 
6131554366
ISBN 13 
9786131554360
Encuadernación
Tapa blanda
Número de páginas
400
Contacto del fabricante
no disponible
Persona responsable
no disponible