Composite materials: Rheology and microstructures of thermoset polymer composites filled with mineral fillers and reinforced with short glass fibres (Omn.Univ.Europ.) - Tapa blanda

Collectif

 
9786131533457: Composite materials: Rheology and microstructures of thermoset polymer composites filled with mineral fillers and reinforced with short glass fibres (Omn.Univ.Europ.)
Tapa blanda
ISBN 10: 6131533458 ISBN 13: 9786131533457
Editorial: OmniScriptum, 2010

Sinopsis

In this work, the rheology and the microstructures of thermoset polymer composites reinforced with glass fibres, such as Bulk Moulding Compounds (BMC) and Sheet Moulding Compounds (SMC), are analysed. Firstly, the rheology of BMC is studied by using dedicated simple and plane strain compression rheometers. Experimental results emphasize the influences of the strain rate, the type of mineral fillers, the volume fraction of fibres as well as the temperature on the BMC rheology. 1D and 3D non-linear viscoelastic rheological models are proposed to reproduce the behaviour of BMC. Secondly, the microstructures of compression moulded SMC plates are analysed by using X-ray phase contrast microtomography. The influences of processing conditions on residual porosity, matrix migration, breakage, bending, compression and orientation of glass-fibre bundles are underlined, allowing a discussion on the relevance of assumptions used to establish rheological models proposed in the literature.

"Sinopsis" puede pertenecer a otra edición de este libro.

Acerca de los autores

Thai Hung LE, PhD in materials science, lecturer at University of Science and Technology, Hanoi, Vietnam. My research is the composite materials, metal forming and modeling and simulation in materials. Denis FAVIER and Laurent ORGEAS, professor at Laboratory of Sols, Solides, Structures-Risques (3S-R), University of Grenoble in France.

Thai Hung LE, PhD in materials science, lecturer at University of Science and Technology, Hanoi, Vietnam. My research is the composite materials, metal forming and modeling and simulation in materials. Denis FAVIER and Laurent ORGEAS, professor at Laboratory of Sols, Solides, Structures-Risques (3S-R), University of Grenoble in France.

Thai Hung LE, PhD in materials science, lecturer at University of Science and Technology, Hanoi, Vietnam. My research is the composite materials, metal forming and modeling and simulation in materials. Denis FAVIER and Laurent ORGEAS, professor at Laboratory of Sols, Solides, Structures-Risques (3S-R), University of Grenoble in France.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
OmniScriptum
Año de publicación
2010
Idioma
Inglés
ISBN 10 
6131533458
ISBN 13 
9786131533457
Encuadernación
Tapa blanda
Número de páginas
184
Contacto del fabricante
no disponible
Persona responsable
info@bod.de
info@bod.de

Überseering 33
Hamburg
22297
Alemania