Artículos relacionados a Direct Shear Test: Geotechnical Engineering, Shear...
Direct Shear Test: Geotechnical Engineering, Shear Strength (soil), Soil, Stress- strain Curve, ASTM, Strain (materials science), Geotechnical Investigation. - Tapa blanda
Sinopsis
Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. A direct shear test is a laboratory test used by geotechnical engineers to find the shear strength parameters of soil. In the U.S., the standard defining how the test should be performed is ASTM D 3080. The test is performed on three or four specimens from a relatively undisturbed soil sample. A specimen is placed in a shear box which has two stacked rings to hold the sample; the contact between the two rings is at approximately the mid- height of the sample. A confining stress is applied vertically to the specimen, and the upper ring is pulled laterally until the sample fails, or through a specified strain. The load applied and the strain induced is recorded at frequent intervals to determine a stress-strain curve for the confining stress. Direct Shear tests can be performed under several conditions.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. A direct shear test is a laboratory test used by geotechnical engineers to find the shear strength parameters of soil. In the U.S., the standard defining how the test should be performed is ASTM D 3080. The test is performed on three or four specimens from a relatively undisturbed soil sample. A specimen is placed in a shear box which has two stacked rings to hold the sample; the contact between the two rings is at approximately the mid- height of the sample. A confining stress is applied vertically to the specimen, and the upper ring is pulled laterally until the sample fails, or through a specified strain. The load applied and the strain induced is recorded at frequent intervals to determine a stress-strain curve for the confining stress. Direct Shear tests can be performed under several conditions.
"Sobre este título" puede pertenecer a otra edición de este libro.
Resultados de la búsqueda para Direct Shear Test: Geotechnical Engineering, Shear...
Imagen del vendedor
Direct Shear Test
Publicado por
Omniscriptum Mär 2026, 2026
ISBN 10: 6130848579
ISBN 13: 9786130848576
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -High Quality Content by WIKIPEDIA articles! A direct shear test is a laboratory test used by geotechnical engineers to find the shear strength parameters of soil. In the U.S., the standard defining how the test should be performed is ASTM D 3080. The test is performed on three or four specimens from a relatively undisturbed soil sample. A specimen is placed in a shear box which has two stacked rings to hold the sample; the contact between the two rings is at approximately the mid- height of the sample. A confining stress is applied vertically to the specimen, and the upper ring is pulled laterally until the sample fails, or through a specified strain. The load applied and the strain induced is recorded at frequent intervals to determine a stress-strain curve for the confining stress. Direct Shear tests can be performed under several conditions. 92 pp. Englisch. Nº de ref. del artículo: 9786130848576
Comprar nuevo
EUR 34,00
Envío por EUR 23,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 2 disponibles
Imagen del vendedor
Direct Shear Test : Geotechnical Engineering, Shear Strength (soil), Soil, Stress- strain Curve, ASTM, Strain (materials science), Geotechnical Investigation.
Impresión bajo demandaLibrería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - High Quality Content by WIKIPEDIA articles! A direct shear test is a laboratory test used by geotechnical engineers to find the shear strength parameters of soil. In the U.S., the standard defining how the test should be performed is ASTM D 3080. The test is performed on three or four specimens from a relatively undisturbed soil sample. A specimen is placed in a shear box which has two stacked rings to hold the sample; the contact between the two rings is at approximately the mid- height of the sample. A confining stress is applied vertically to the specimen, and the upper ring is pulled laterally until the sample fails, or through a specified strain. The load applied and the strain induced is recorded at frequent intervals to determine a stress-strain curve for the confining stress. Direct Shear tests can be performed under several conditions. Nº de ref. del artículo: 9786130848576
Comprar nuevo
EUR 42,20
Envío por EUR 35,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen del vendedor
Direct Shear Test
Publicado por
Omniscriptum Mär 2026, 2026
ISBN 10: 6130848579
ISBN 13: 9786130848576
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Please note that the content of this book primarily consists of articlesavailable from Wikipedia or other free sources online. A direct sheartest is a laboratory test used by geotechnical engineers to find theshear strength parameters of soil. In the U.S., the standard defininghow the test should be performed is ASTM D 3080. The test is performedon three or four specimens from a relatively undisturbed soil sample. Aspecimen is placed in a shear box which has two stacked rings to holdthe sample; the contact between the two rings is at approximately themid- height of the sample. A confining stress is applied vertically tothe specimen, and the upper ring is pulled laterally until the samplefails, or through a specified strain. The load applied and the straininduced is recorded at frequent intervals to determine a stress-straincurve for the confining stress. Direct Shear tests can be performedunder several conditions.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 92 pp. Englisch. Nº de ref. del artículo: 9786130848576
Comprar nuevo
EUR 136,00
Envío por EUR 60,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles