Artículos relacionados a Modeling Rock Surface Topology: Generated by a Polycrystalli...
Modeling Rock Surface Topology: Generated by a Polycrystalline Diamond Compact (PDC) Coring Bit under Dynamic Drilling Conditions - Tapa blanda
Sinopsis
Most of the energy needs in today’s world are dependent on oil and natural gas. With the increasing demand and dwindling resources, drilling deeper wells is in greater need today. Deeper wells require longer drillstrings. The long drillstrings are essentially unstable and cause excessive vibrations. Moreover, deep wells encounter harder rock increasing the severity of vibration. The stability of a drillstring depends upon the dynamics of the drillstring, design of the bit and type of rock. For oil and gas drilling, Polycrystalline Diamond Compact (PDC) bits are used often due to increased rate of penetration. One such PDC bit is a Coring Bit. A Coring Bit produces a core and hence has lesser area of cut to be made. This makes drilling at high penetration rate possible. A special type of coring bit was used at the Hard Rock Drilling Facility (HRDF) at the Sandia National Labs (SNL). The surfaces generated by this bit are used to study the nature of vibration in drillstrings. Observation of the rock surface after the test is an old practice in drillstring research.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
Most of the energy needs in today’s world are dependent on oil and natural gas. With the increasing demand and dwindling resources, drilling deeper wells is in greater need today. Deeper wells require longer drillstrings. The long drillstrings are essentially unstable and cause excessive vibrations. Moreover, deep wells encounter harder rock increasing the severity of vibration. The stability of a drillstring depends upon the dynamics of the drillstring, design of the bit and type of rock. For oil and gas drilling, Polycrystalline Diamond Compact (PDC) bits are used often due to increased rate of penetration. One such PDC bit is a Coring Bit. A Coring Bit produces a core and hence has lesser area of cut to be made. This makes drilling at high penetration rate possible. A special type of coring bit was used at the Hard Rock Drilling Facility (HRDF) at the Sandia National Labs (SNL). The surfaces generated by this bit are used to study the nature of vibration in drillstrings. Observation of the rock surface after the test is an old practice in drillstring research.
Biografía del autor
Allhad Abhyankar is a Mechanical Design Engineer. He has a Master's degree in Mechanical Engineering from the University of Louisiana at Lafayette with honors. He has also completed his Bachelor's in Mechanical Engineering from Nagpur University ,India.
"Sobre este título" puede pertenecer a otra edición de este libro.
- EditorialLAP LAMBERT Academic Publishing
- Año de publicación2011
- ISBN 10 3846543330
- ISBN 13 9783846543337
- EncuadernaciónTapa blanda
- IdiomaInglés
- Número de páginas76
- Contacto del fabricanteno disponible
Comprar nuevo
Ver este artículo
EUR 49,00
EUR 11,00 gastos de envío desde Alemania a España
Destinos, gastos y plazos de envíoResultados de la búsqueda para Modeling Rock Surface Topology: Generated by a Polycrystalli...
Imagen del vendedor
Modeling Rock Surface Topology
Publicado por
LAP LAMBERT Academic Publishing Nov 2011, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Most of the energy needs in today s world are dependent on oil and natural gas. With the increasing demand and dwindling resources, drilling deeper wells is in greater need today. Deeper wells require longer drillstrings. The long drillstrings are essentially unstable and cause excessive vibrations. Moreover, deep wells encounter harder rock increasing the severity of vibration. The stability of a drillstring depends upon the dynamics of the drillstring, design of the bit and type of rock. For oil and gas drilling, Polycrystalline Diamond Compact (PDC) bits are used often due to increased rate of penetration. One such PDC bit is a Coring Bit. A Coring Bit produces a core and hence has lesser area of cut to be made. This makes drilling at high penetration rate possible. A special type of coring bit was used at the Hard Rock Drilling Facility (HRDF) at the Sandia National Labs (SNL). The surfaces generated by this bit are used to study the nature of vibration in drillstrings. Observation of the rock surface after the test is an old practice in drillstring research. 76 pp. Englisch. Nº de ref. del artículo: 9783846543337
Cantidad disponible: 2 disponibles
Imagen del vendedor
Modeling Rock Surface Topology : Generated by a Polycrystalline Diamond Compact (PDC) Coring Bit under Dynamic Drilling Conditions
Publicado por
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Most of the energy needs in today s world are dependent on oil and natural gas. With the increasing demand and dwindling resources, drilling deeper wells is in greater need today. Deeper wells require longer drillstrings. The long drillstrings are essentially unstable and cause excessive vibrations. Moreover, deep wells encounter harder rock increasing the severity of vibration. The stability of a drillstring depends upon the dynamics of the drillstring, design of the bit and type of rock. For oil and gas drilling, Polycrystalline Diamond Compact (PDC) bits are used often due to increased rate of penetration. One such PDC bit is a Coring Bit. A Coring Bit produces a core and hence has lesser area of cut to be made. This makes drilling at high penetration rate possible. A special type of coring bit was used at the Hard Rock Drilling Facility (HRDF) at the Sandia National Labs (SNL). The surfaces generated by this bit are used to study the nature of vibration in drillstrings. Observation of the rock surface after the test is an old practice in drillstring research. Nº de ref. del artículo: 9783846543337
Cantidad disponible: 1 disponibles
Imagen del vendedor
Modeling Rock Surface Topology
Publicado por
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Abhyankar AllhadAllhad Abhyankar is a Mechanical Design Engineer. He has a Master s degree in Mechanical Engineering from the University of Louisiana at Lafayette with honors. He has also completed his Bachelor s in Mechanical Engine. Nº de ref. del artículo: 5497935
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
Modeling Rock Surface Topology
Publicado por
LAP LAMBERT Academic Publishing Nov 2011, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. Neuware -Most of the energy needs in today¿s world are dependent on oil and natural gas. With the increasing demand and dwindling resources, drilling deeper wells is in greater need today. Deeper wells require longer drillstrings. The long drillstrings are essentially unstable and cause excessive vibrations. Moreover, deep wells encounter harder rock increasing the severity of vibration. The stability of a drillstring depends upon the dynamics of the drillstring, design of the bit and type of rock. For oil and gas drilling, Polycrystalline Diamond Compact (PDC) bits are used often due to increased rate of penetration. One such PDC bit is a Coring Bit. A Coring Bit produces a core and hence has lesser area of cut to be made. This makes drilling at high penetration rate possible. A special type of coring bit was used at the Hard Rock Drilling Facility (HRDF) at the Sandia National Labs (SNL). The surfaces generated by this bit are used to study the nature of vibration in drillstrings. Observation of the rock surface after the test is an old practice in drillstring research.Books on Demand GmbH, Überseering 33, 22297 Hamburg 76 pp. Englisch. Nº de ref. del artículo: 9783846543337
Cantidad disponible: 2 disponibles
Imagen de archivo
Modeling Rock Surface Topology: Generated By A Polycrystalline Diamond Compact (Pdc) Coring Bit Under Dynamic Drilling Conditions
Publicado por
Lap Lambert Academic Publishing, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
Paperback
Librería: Revaluation Books, Exeter, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Brand New. 76 pages. 8.66x5.91x0.18 inches. In Stock. Nº de ref. del artículo: __3846543330
Cantidad disponible: 1 disponibles
Imagen de archivo
Modeling Rock Surface Topology: Generated By A Polycrystalline Diamond Compact (Pdc) Coring Bit Under Dynamic Drilling Conditions
Publicado por
Lap Lambert Academic Publishing, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
Paperback
Librería: Revaluation Books, Exeter, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Brand New. 76 pages. 8.66x5.91x0.18 inches. In Stock. Nº de ref. del artículo: 3846543330
Cantidad disponible: 1 disponibles
Imagen de archivo
Modeling Rock Surface Topology: Generated by a Polycrystalline Diamond Compact (PDC) Coring Bit under Dynamic Drilling Conditions
Publicado por
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3846543330
ISBN 13: 9783846543337
Nuevo
paperback
Librería: dsmbooks, Liverpool, Reino Unido
Calificación del vendedor: 4 de 5 estrellas
paperback. Condición: New. New. book. Nº de ref. del artículo: D8S0-3-M-3846543330-6
Cantidad disponible: 1 disponibles