Artículos relacionados a Plastic Injection Molds: Cooling System Design

Plastic Injection Molds: Cooling System Design - Tapa blanda

Ali, Muhammad Shahzad

 
9783844306187: Plastic Injection Molds: Cooling System Design
Tapa blanda
ISBN 10: 3844306188 ISBN 13: 9783844306187
Editorial: LAP LAMBERT Academic Publishing, 2011

Sinopsis

Plastic injection molding process is well known as the manufacturing process to create products with various shapes and complex geometry at low cost. The injection molding cycle consists of several stages, such as filling, packing, and cooling. The cooling system design is of considerable importance since about 80% of the cycle time is taken up by the cooling phase. In this book, injection mold of a complicated plastic part with undercuts is designed by providing the Sliders in the mold and cycle time is reduced by optimizing cooling time. In this book, different variables included: size, location and layout of cooling channels, temperature and flow rate of the coolant and the effect of different types of plastic materials on cooling time are analyzed analytically and through software analysis to optimize the cooling time.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

Plastic injection molding process is well known as the manufacturing process to create products with various shapes and complex geometry at low cost. The injection molding cycle consists of several stages, such as filling, packing, and cooling. The cooling system design is of considerable importance since about 80% of the cycle time is taken up by the cooling phase. In this book, injection mold of a complicated plastic part with undercuts is designed by providing the Sliders in the mold and cycle time is reduced by optimizing cooling time. In this book, different variables included: size, location and layout of cooling channels, temperature and flow rate of the coolant and the effect of different types of plastic materials on cooling time are analyzed analytically and through software analysis to optimize the cooling time.

Biografía del autor

M.Sc. Engineering: "Applied Mechanics and Design" At University of Engineering and Technology, Taxila, Pakistan. Working on injection molds design and manufacturing for automobile industry. Member of "Pakistan Engineering Council" and "Pakistan Engineering Congress".

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
LAP LAMBERT Academic Publishing
Año de publicación
2011
Idioma
Inglés
ISBN 10 
3844306188
ISBN 13 
9783844306187
Encuadernación
Tapa blanda
Número de páginas
108
Contacto del fabricante
no disponible
Persona responsable
no disponible