Artículos relacionados a Development of a Compressor Circuit for an Automatic...

Development of a Compressor Circuit for an Automatic Sound Desk: Design, make and test - Tapa blanda

ARUNACHALAM, Subramaniam; PAGE, TOM

 
9783843385671: Development of a Compressor Circuit for an Automatic Sound Desk: Design, make and test
Tapa blanda
ISBN 10: 384338567X ISBN 13: 9783843385671
Editorial: LAP LAMBERT Academic Publishing, 2010

Sinopsis

The purpose of this project is to design, build and evaluate a compressor circuit that could be controlled manually. Compressor circuit is designed to avoid the output sound signal clipping (distortion). In order to design a system that could prevent the sound signal wave distortion, the definition of sound control desk (channel strip) and compressor circuit had to be researched. To get the best performance from any recording or transmission medium requires that some passages that are close to the maximum permissible level, and that they may momentarily or unpredictably exceed it. In such cases, the danger of frequency distortion is replaced by controlled (and usually less noticeable) distortion of dynamics. After most corrections have been made manually, the few that remain can be ?cleaned up' automatically by a compressor or by its more extreme form, limiter.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

The purpose of this project is to design, build and evaluate a compressor circuit that could be controlled manually. Compressor circuit is designed to avoid the output sound signal clipping (distortion). In order to design a system that could prevent the sound signal wave distortion, the definition of sound control desk (channel strip) and compressor circuit had to be researched. To get the best performance from any recording or transmission medium requires that some passages that are close to the maximum permissible level, and that they may momentarily or unpredictably exceed it. In such cases, the danger of frequency distortion is replaced by controlled (and usually less noticeable) distortion of dynamics. After most corrections have been made manually, the few that remain can be 'cleaned up' automatically by a compressor or by its more extreme form, limiter.

Biografía del autor

Dr.Subramaniam Arunachalam PhD, PGC, BEng (Hons), BSc, Dip(Tech), MIEE, teaches Manufacturing System Engineering and Product Design at the School of Computing, IT and Engineering at the University of East London, UK.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
LAP LAMBERT Academic Publishing
Año de publicación
2010
Idioma
Inglés
ISBN 10 
384338567X
ISBN 13 
9783843385671
Encuadernación
Tapa blanda
Número de páginas
92
Contacto del fabricante
no disponible
Persona responsable
no disponible