Artículos relacionados a Synthesis and characterization of DLC films prepared...

Synthesis and characterization of DLC films prepared by PLD method: Synthesis and characterization of diamond-like carbon thin films prepared by pulsed laser deposition method - Tapa blanda

Eskusson, Jaanus

 
9783838320113: Synthesis and characterization of DLC films prepared by PLD method: Synthesis and characterization of diamond-like carbon thin films prepared by pulsed laser deposition method
Tapa blanda
ISBN 10: 3838320115 ISBN 13: 9783838320113
Editorial: LAP Lambert Academic Publishing, 2009

Sinopsis

Various DLC films were prepared using four different type synthesis setups. Optical microscopy data showed that the film regions grown under excimer laser illumination were strongly interference colored (?E > 3 eV) at certain energy densities of illumination. AFM studies indicated that lower deposition temperatures resulted in bigger grain size of the DLC film surface structures and that the DLC films grown under laser illumination conditions were smoother. Raman spectroscopy studies of films indicated that higher ablating laser beam intensity had positive influence on the sp3 hybridized carbon content in films and that the additional irradiation of the growing film between the ablation pulses is inevitable to create the individual diamond phase formation into DLC films. The existence of diamond clusters in these films was also confirmed using AFM method. The individual diamond phase forms only in a narrow window of irradiating laser beam energy density. The cyclic voltammetry and impedance data for the DLCE|xM NaF+H2O interface show that this system is nearly ideally polarizable in the potential region ?0.4 < E < 1.1 V [vs. AgCl|Ag (sat. KCl in H2O)].

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

Various DLC films were prepared using four different type synthesis setups. Optical microscopy data showed that the film regions grown under excimer laser illumination were strongly interference colored (ΔE > 3 eV) at certain energy densities of illumination. AFM studies indicated that lower deposition temperatures resulted in bigger grain size of the DLC film surface structures and that the DLC films grown under laser illumination conditions were smoother. Raman spectroscopy studies of films indicated that higher ablating laser beam intensity had positive influence on the sp3 hybridized carbon content in films and that the additional irradiation of the growing film between the ablation pulses is inevitable to create the individual diamond phase formation into DLC films. The existence of diamond clusters in these films was also confirmed using AFM method. The individual diamond phase forms only in a narrow window of irradiating laser beam energy density. The cyclic voltammetry and impedance data for the DLCE|xM NaF+H2O interface show that this system is nearly ideally polarizable in the potential region -0.4 < E < 1.1 V [vs. AgCl|Ag (sat. KCl in H2O)].

Biografía del autor

Jaanus Eskusson, born in Parnu Estonia, studied in the University of Tatu in Estionia itself from 1996 to 2009. He received his B.Sc. in Chemistry in 2000. He then received his M.Sc. in physical and electrochemistry in 2002 and it follows with a Ph.D. in Chemistry in 2009.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
LAP Lambert Academic Publishing
Año de publicación
2009
Idioma
Inglés
ISBN 10 
3838320115
ISBN 13 
9783838320113
Encuadernación
Tapa blanda
Número de páginas
88
Contacto del fabricante
no disponible
Persona responsable
no disponible