Artículos relacionados a Non-Destructive Testing of Metallic 3D Printed Specimens

Non-Destructive Testing of Metallic 3D Printed Specimens - Tapa blanda

Wong Brian Stephen

 
9783659757549: Non-Destructive Testing of Metallic 3D Printed Specimens
Tapa blanda
ISBN 10: 3659757543 ISBN 13: 9783659757549
Editorial: KS OmniScriptum Publishing, 2015

Sinopsis

The need for innovation in the manufacturing industry to meet the consumer’s fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
KS OmniScriptum Publishing
Año de publicación
2015
Idioma
Inglés
ISBN 10 
3659757543
ISBN 13 
9783659757549
Encuadernación
Tapa blanda
Número de páginas
92
Contacto del fabricante
no disponible
Persona responsable
BoD - Books on Demand GmbH
info@bod.de

In de Tarpen 42
Norderstedt
22848
Alemania