Artículos relacionados a SPM Reduction In Fiber Using EDFA
Sinopsis
As the signal propagates through a fiber optical communication system it suffers from attenuation and dispersion. Attenuation determines the repeater less separation between a transmitter and a receiver, while dispersion causes the signal pulses to broaden as they travel along the fiber. In other words attenuation is the process of weakening of a signal as it propagates through a fiber and dispersion limits the information carrying capacity. Either repeaters or optical amplifiers may compensate these losses. Due to pulse broadening two neighboring pulses interfere with each other and information in the pulses gets overlapped. This can be attributed to many factors. One of the basic reasons is the non-linear property of the fiber. These effects are not effective at low power intensity, but degrade the signal at high power levels. Before 1960 LED's were main source of optical communication, which operate at a low power level. With the advent of highly coherent laser beams the electric field strength can be 31010 V/m, which is of the order of atomic fields. At such high field the relation between polarization and field's strength becomes nonlinear. In fact at high power level refract
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
As the signal propagates through a fiber optical communication system it suffers from attenuation and dispersion. Attenuation determines the repeater less separation between a transmitter and a receiver, while dispersion causes the signal pulses to broaden as they travel along the fiber. In other words attenuation is the process of weakening of a signal as it propagates through a fiber and dispersion limits the information carrying capacity. Either repeaters or optical amplifiers may compensate these losses. Due to pulse broadening two neighboring pulses interfere with each other and information in the pulses gets overlapped. This can be attributed to many factors. One of the basic reasons is the non-linear property of the fiber. These effects are not effective at low power intensity, but degrade the signal at high power levels. Before 1960 LED's were main source of optical communication, which operate at a low power level. With the advent of highly coherent laser beams the electric field strength can be 31010 V/m, which is of the order of atomic fields. At such high field the relation between polarization and field's strength becomes nonlinear. In fact at high power level refract
Biografía del autor
Pardeep K. Jindal is currently working as Assisstant Professor in Department of Electronics & Communication Engineering , Aryabhatta Group of Institutes, Barnala, Punjab.He graduated in E & I Engineering from M.M Engineering College Mullana Ambala and post graduated in Electronics & Communication Engineering from Punjab Technical University.
"Sobre este título" puede pertenecer a otra edición de este libro.
Resultados de la búsqueda para SPM Reduction In Fiber Using EDFA
Imagen del vendedor
SPM Reduction In Fiber Using EDFA
Publicado por
LAP LAMBERT Academic Publishing Nov 2014, 2014
ISBN 10: 3659632708
ISBN 13: 9783659632709
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -As the signal propagates through a fiber optical communication system it suffers from attenuation and dispersion. Attenuation determines the repeater less separation between a transmitter and a receiver, while dispersion causes the signal pulses to broaden as they travel along the fiber. In other words attenuation is the process of weakening of a signal as it propagates through a fiber and dispersion limits the information carrying capacity. Either repeaters or optical amplifiers may compensate these losses. Due to pulse broadening two neighboring pulses interfere with each other and information in the pulses gets overlapped. This can be attributed to many factors. One of the basic reasons is the non-linear property of the fiber. These effects are not effective at low power intensity, but degrade the signal at high power levels. Before 1960 LED's were main source of optical communication, which operate at a low power level. With the advent of highly coherent laser beams the electric field strength can be 3 1010 V/m, which is of the order of atomic fields. At such high field the relation between polarization and field's strength becomes nonlinear. In fact at high power level refract 104 pp. Englisch. Nº de ref. del artículo: 9783659632709
Comprar nuevo
EUR 54,90
Envío por EUR 23,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 2 disponibles
Imagen del vendedor
SPM Reduction In Fiber Using EDFA
Publicado por
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659632708
ISBN 13: 9783659632709
Nuevo
Taschenbuch
Librería: AHA-BUCH GmbH, Einbeck, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - As the signal propagates through a fiber optical communication system it suffers from attenuation and dispersion. Attenuation determines the repeater less separation between a transmitter and a receiver, while dispersion causes the signal pulses to broaden as they travel along the fiber. In other words attenuation is the process of weakening of a signal as it propagates through a fiber and dispersion limits the information carrying capacity. Either repeaters or optical amplifiers may compensate these losses. Due to pulse broadening two neighboring pulses interfere with each other and information in the pulses gets overlapped. This can be attributed to many factors. One of the basic reasons is the non-linear property of the fiber. These effects are not effective at low power intensity, but degrade the signal at high power levels. Before 1960 LED's were main source of optical communication, which operate at a low power level. With the advent of highly coherent laser beams the electric field strength can be 3 1010 V/m, which is of the order of atomic fields. At such high field the relation between polarization and field's strength becomes nonlinear. In fact at high power level refract. Nº de ref. del artículo: 9783659632709
Comprar nuevo
EUR 54,90
Envío por EUR 35,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen del vendedor
SPM Reduction In Fiber Using EDFA
Publicado por
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659632708
ISBN 13: 9783659632709
Nuevo
Tapa blanda
Librería: moluna, Greven, Alemania
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Jindal Pardeep KumarPardeep K. Jindal is currently working as Assisstant Professor in Department of Electronics & Communication Engineering , Aryabhatta Group of Institutes, Barnala, Punjab.He graduated in E & I Engineering from M.M . Nº de ref. del artículo: 5169812
Comprar nuevo
EUR 45,45
Envío por EUR 48,99
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: Más de 20 disponibles
Imagen del vendedor
SPM Reduction In Fiber Using EDFA
Publicado por
LAP LAMBERT Academic Publishing Nov 2014, 2014
ISBN 10: 3659632708
ISBN 13: 9783659632709
Nuevo
Taschenbuch
Librería: buchversandmimpf2000, Emtmannsberg, BAYE, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -As the signal propagates through a fiber optical communication system it suffers from attenuation and dispersion. Attenuation determines the repeater less separation between a transmitter and a receiver, while dispersion causes the signal pulses to broaden as they travel along the fiber. In other words attenuation is the process of weakening of a signal as it propagates through a fiber and dispersion limits the information carrying capacity. Either repeaters or optical amplifiers may compensate these losses. Due to pulse broadening two neighboring pulses interfere with each other and information in the pulses gets overlapped. This can be attributed to many factors. One of the basic reasons is the non-linear property of the fiber. These effects are not effective at low power intensity, but degrade the signal at high power levels. Before 1960 LED's were main source of optical communication, which operate at a low power level. With the advent of highly coherent laser beams the electric field strength can be 3¿1010 V/m, which is of the order of atomic fields. At such high field the relation between polarization and field's strength becomes nonlinear. In fact at high power level refractVDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 104 pp. Englisch. Nº de ref. del artículo: 9783659632709
Comprar nuevo
EUR 54,90
Envío por EUR 60,00
Se envía de Alemania a Estados Unidos de America
Se envía de Alemania a Estados Unidos de America
Cantidad disponible: 1 disponibles