Artículos relacionados a Optimization of Process Parameters for Ohmic Heating...

Optimization of Process Parameters for Ohmic Heating of Ginger Paste - Tapa blanda

Pandey, Ram Krishna; Sakharam, K. S.

 
9783659426391: Optimization of Process Parameters for Ohmic Heating of Ginger Paste

Sinopsis

Ohmic heating can be suitably used for production of acceptable yellowish coloured ginger paste. Electrical conductivity increases and time of heating decreases with increasing salt level of ginger paste. Temperature of 80˚C is sufficient for ohmic heating of ginger paste. Microbial load is negligible in ohmically treated ginger paste for all the combinations of salt levels and voltage gradients. Ohmic heating treatment keeps the pH and TSS of ginger paste well within the acceptable range. Optimization of process parameters indicates that the optimum conditions of voltage gradient, salt level and KMS treatment for pH are 12 v/cm, 0.5% and 0.2 % respectively, for TSS 11.8 v/cm, 1.5% and 0.2 %, for L* colour value they are 20.5 v/cm, 0.4%, 0.2 %, for a* value 6.96 v/cm, 0.6%, 0 % and for b* value the optimum conditions are 8.6 v/cm, 0 % and 1% respectively

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

Ohmic heating can be suitably used for production of acceptable yellowish coloured ginger paste. Electrical conductivity increases and time of heating decreases with increasing salt level of ginger paste. Temperature of 80˚C is sufficient for ohmic heating of ginger paste. Microbial load is negligible in ohmically treated ginger paste for all the combinations of salt levels and voltage gradients. Ohmic heating treatment keeps the pH and TSS of ginger paste well within the acceptable range. Optimization of process parameters indicates that the optimum conditions of voltage gradient, salt level and KMS treatment for pH are 12 v/cm, 0.5% and 0.2 % respectively, for TSS 11.8 v/cm, 1.5% and 0.2 %, for L* colour value they are 20.5 v/cm, 0.4%, 0.2 %, for a* value 6.96 v/cm, 0.6%, 0 % and for b* value the optimum conditions are 8.6 v/cm, 0 % and 1% respectively

"Sobre este título" puede pertenecer a otra edición de este libro.