Artículos relacionados a Modelling Hot Deformation of Steels: An Approach to...

Modelling Hot Deformation of Steels: An Approach to Understanding and Behaviour - Tapa blanda

 
9783642525179: Modelling Hot Deformation of Steels: An Approach to Understanding and Behaviour
Tapa blanda
ISBN 10: 3642525172 ISBN 13: 9783642525179
Editorial: Springer, 2014

Sinopsis

Computer Aided Engineering may be defined as an approach to solving tech nological problems in which most or all of the steps involved are automated through the use of computers, data bases and mathematical models. The success of this ap proach, considering hot forming, is tied very directly to an understanding of material behaviour when subjected to deformation at high temperatures. There is general agreement among engineers that not enough is known about that topic -and this gave the initial impetus for the project described in the present study. The authors secured a research grant from NATO (Special Research Grant #390/83) with a mandate to study the "State-of-the-Art of Controlled Rolling". What follows is the result of that study. There are five chapters in this Monograph. The first one, entitled "State-of-the Art of Controlled Rolling" discusses industrial and laboratory practices and research designed to aid in the development of microalloyed steels of superior quality. Follow ing this is the chapter "Methods of Determining Stress-Strain Curves at Elevated Temperatures". The central concern here is the material’s resistance to deformation or in other words, its flow strength, the knowledge of which is absolutely essential for the efficient and economical utilization of the computers controlling the rolling process.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

Computer Aided Engineering may be defined as an approach to solving tech­ nological problems in which most or all of the steps involved are automated through the use of computers, data bases and mathematical models. The success of this ap­ proach, considering hot forming, is tied very directly to an understanding of material behaviour when subjected to deformation at high temperatures. There is general agreement among engineers that not enough is known about that topic -and this gave the initial impetus for the project described in the present study. The authors secured a research grant from NATO (Special Research Grant #390/83) with a mandate to study the "State-of-the-Art of Controlled Rolling". What follows is the result of that study. There are five chapters in this Monograph. The first one, entitled "State-of-the­ Art of Controlled Rolling" discusses industrial and laboratory practices and research designed to aid in the development of microalloyed steels of superior quality. Follow­ ing this is the chapter "Methods of Determining Stress-Strain Curves at Elevated Temperatures". The central concern here is the material's resistance to deformation or in other words, its flow strength, the knowledge of which is absolutely essential for the efficient and economical utilization of the computers controlling the rolling process.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Springer
Año de publicación
2014
Idioma
Inglés
ISBN 10 
3642525172
ISBN 13 
9783642525179
Encuadernación
Tapa blanda
Número de páginas
160
Editor
Lenard John G.
Contacto del fabricante
Springer Nature Customer Service Center GmbH
ProductSafety@springernature.com

Europaplatz 3
Heidelberg
69115
Alemania