Artículos relacionados a Discretization of Crack Propagation on Parallel Computing:...

Discretization of Crack Propagation on Parallel Computing: Complexity and Parallel Algorithms with Source Code - Tapa blanda

Alias, Norma; Rajibul Islam, Md.

 
9783639285994: Discretization of Crack Propagation on Parallel Computing: Complexity and Parallel Algorithms with Source Code
Tapa blanda
ISBN 10: 3639285999 ISBN 13: 9783639285994
Editorial: VDM Verlag Dr. Müller, 2010

Sinopsis

Deformation due to stress and strain that lead to an initiation of crack and then propagates is usually being modelled satisfactory by using finite element method (FEM). The mathematical model was developed by using the relationship between the forces applied to the individual elements and the nodal displacements. The element stiffness matrix which had been set up earlier can be used to describe the elastic deformation since the numerical FEM is emphasized as a platform for discretization of one- dimensional continua problems where the stress is uniaxial and implemented on parallel algorithm using the distributed parallel computer system. Parallel algorithm is used by Parallel Virtual Machine (PVM) software tool to capture the visualization of the overall extension and the stress distribution in a linearly tapered bar of circular section with an end load. The results obtained from the finite element approximation are presented graphically. In this book, the performance measurements of algorithm are presented in terms of speedup, efficiency, effectiveness and temporal performance.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

Deformation due to stress and strain that lead to an initiation of crack and then propagates is usually being modelled satisfactory by using finite element method (FEM). The mathematical model was developed by using the relationship between the forces applied to the individual elements and the nodal displacements. The element stiffness matrix which had been set up earlier can be used to describe the elastic deformation since the numerical FEM is emphasized as a platform for discretization of one- dimensional continua problems where the stress is uniaxial and implemented on parallel algorithm using the distributed parallel computer system. Parallel algorithm is used by Parallel Virtual Machine (PVM) software tool to capture the visualization of the overall extension and the stress distribution in a linearly tapered bar of circular section with an end load. The results obtained from the finite element approximation are presented graphically. In this book, the performance measurements of algorithm are presented in terms of speedup, efficiency, effectiveness and temporal performance.

Biografía del autor

Norma Alias, PhD: Studied Industrial Computing at National University of Malaysia. Senior Lecturer at Ibnu Sina Institute, UTM, Malaysia. Md. Rajibul Islam, M.Sc (by Research): Studied IT at Multimedia University, Malaysia. Research Assistant (RA) at Ibnu Sina Institute, UTM, Malaysia.

Norma Alias, PhD: Studied Industrial Computing at National University of Malaysia. Senior Lecturer at Ibnu Sina Institute, UTM, Malaysia. Md. Rajibul Islam, M.Sc (by Research): Studied IT at Multimedia University, Malaysia. Research Assistant (RA) at Ibnu Sina Institute, UTM, Malaysia.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
VDM Verlag Dr. Müller
Año de publicación
2010
Idioma
Inglés
ISBN 10 
3639285999
ISBN 13 
9783639285994
Encuadernación
Tapa blanda
Número de páginas
112
Contacto del fabricante
no disponible
Persona responsable
no disponible