Artículos relacionados a POWER SUPPLIES FOR WIRELESS INTEGRATED MICROSYSTEMS...

POWER SUPPLIES FOR WIRELESS INTEGRATED MICROSYSTEMS (WIMS): Design and Optimization - Tapa blanda

Albano, Fabio

 
9783639060980: POWER SUPPLIES FOR WIRELESS INTEGRATED MICROSYSTEMS (WIMS): Design and Optimization
Tapa blanda
ISBN 10: 3639060989 ISBN 13: 9783639060980
Editorial: VDM Verlag, 2009

Sinopsis

In this work, we developed a novel power supply for the WIMS-ERC (Wireless Integrated Microsystems - Engineering Research Center, Ann Arbor, MI) intraocular sensor (WIMS-IOS), an autonomous and implantable system. This device is representative of a broad class of microscale devices, whose full implementation in environmental and medical systems will require significantly smaller power supplies; presently, battery systems represent 85% mass and 50% volume of typical devices and they have intrinsically high power (3.5-4.2V) based on lithium chemistry which complicates integration with low- voltage MEMS, since it necessitates voltage regulation. Our underlying hypothesis was that selection of the optimum electrochemistry and usage of physical vapor deposition would reduce intrinsic losses because of the high resulting precision, while allowing integration with chips because of more benign processing conditions to MEMS. They also offer potentially lower cost than existing systems.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

In this work, we developed a novel power supply for the WIMS-ERC (Wireless Integrated Microsystems - Engineering Research Center, Ann Arbor, MI) intraocular sensor (WIMS-IOS), an autonomous and implantable system. This device is representative of a broad class of microscale devices, whose full implementation in environmental and medical systems will require significantly smaller power supplies; presently, battery systems represent 85% mass and 50% volume of typical devices and they have intrinsically high power (3.5-4.2V) based on lithium chemistry which complicates integration with low- voltage MEMS, since it necessitates voltage regulation. Our underlying hypothesis was that selection of the optimum electrochemistry and usage of physical vapor deposition would reduce intrinsic losses because of the high resulting precision, while allowing integration with chips because of more benign processing conditions to MEMS. They also offer potentially lower cost than existing systems.

Biografía del autor

Dr. Fabio Albano is Chief Manufacturing Engineer and co-founder of Sakti3. He received the diplôme d'ingénieur from INP of Grenoble in 2002 and the M.S.E. and Ph.D. in Materials Science and Engineering from the University of Michigan, Ann Arbor in 2004 and 2008, with a focus on battery materials under the guidance of Professor Ann Marie Sastry.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
VDM Verlag
Año de publicación
2009
Idioma
Inglés
ISBN 10 
3639060989
ISBN 13 
9783639060980
Encuadernación
Tapa blanda
Número de páginas
112
Contacto del fabricante
no disponible
Persona responsable
no disponible