Rotorcraft Certification by Simulation and Analysis: An Introduction to the Principles and Practices (Springer Aerospace Technology) - Tapa dura

Padfield, Gareth D.; Hofmeister, Philipp; Van ’t Hoff, Stefan

 
9783031863974: Rotorcraft Certification by Simulation and Analysis: An Introduction to the Principles and Practices (Springer Aerospace Technology)
Tapa dura
ISBN 10: 3031863976 ISBN 13: 9783031863974
Editorial: Springer, 2025

Sinopsis

This open access book presents the steps necessary for the application of rotorcraft flight modelling and simulation and analysis in support of certification for compliance with EASA CS-27 and CS-29, SUBPART B-FLIGHT and other flight-related rules (e.g. CS-27/9, Appendix B, Airworthiness Criteria for Helicopter Instrument Flight). The material is presented in the form of a structured ’Rotorcraft Certification by Simulation’ process, starting from the relevant paragraphs in the Certification Specifications, through a comprehensive description of the assembly of flight simulation requirements, informed by judgements on Influence, Predictability and Credibility, and on into the detailed building of the three major elements of the process; the Flight Simulation Model, the Flight Simulator, and the associated Flight Test Measurement System. The latter feeds both the flight model and simulator development with real-world test data to support validation and fidelity assessment. The book is intended to provide support to early adopters of simulation and analysis in the certification process, including those who have considerable experience and expertise in the use of Modelling and Simulation in support of design and development. It is acknowledged that there exists much good practice in the rotorcraft industry in this regard. However, what is presented herein is considered a significant step forward in the development of this practice, particularly in terms of the importance of a structured, requirements-based, process using adaptable-fidelity, descriptive and predictive simulation tools, and associated pre-certification flight testing, to reach the goal of a credible flight simulation. 

"Sinopsis" puede pertenecer a otra edición de este libro.

Acerca del autor

Stefan van’t Hoff is Principal R&D Engineer and Leads the Vertical Flight team at NLR, the Netherlands.   Philipp Hofmeister is a R&D Engineer at the Institute of Flight Systems – Rotorcraft Department at DLR, Germany.   Linghai Lu is Senior Lecturer in Flight Dynamics and Simulation at Cranfield University, UK.   Gareth D. Padfield is Emeritus Professor of Aerospace Engineering at The University of Liverpool, UK. He is the Book lead editor.   Giuseppe Quaranta is Professor of Aeroservoelasticity, and Deputy Head at the Department of Aerospace Science and Technology of Politecnico di Milano, Italy. He was the RoCS project lead.   Mark White is Professor of Aerospace Engineering and Head of the Department of Mechanical and Aerospace Engineering at The University of Liverpool.

De la contraportada

This open access book presents the steps necessary for the application of rotorcraft flight modelling and simulation and analysis in support of certification for compliance with EASA CS-27 and CS-29, SUBPART B--FLIGHT and other flight-related rules (e.g. CS-27/9, Appendix B, Airworthiness Criteria for Helicopter Instrument Flight). The material is presented in the form of a structured 'Rotorcraft Certification by Simulation' process, starting from the relevant paragraphs in the Certification Specifications, through a comprehensive description of the assembly of flight simulation requirements, informed by judgements on Influence, Predictability and Credibility, and on into the detailed building of the three major elements of the process; the Flight Simulation Model, the Flight Simulator, and the associated Flight Test Measurement System. The latter feeds both the flight model and simulator development with real-world test data to support validation and fidelity assessment. The book is intended to provide support to early adopters of simulation and analysis in the certification process, including those who have considerable experience and expertise in the use of Modelling and Simulation in support of design and development. It is acknowledged that there exists much good practice in the rotorcraft industry in this regard. However, what is presented herein is considered a significant step forward in the development of this practice, particularly in terms of the importance of a structured, requirements-based, process using adaptable-fidelity, descriptive and predictive simulation tools, and associated pre-certification flight testing, to reach the goal of a credible flight simulation.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Springer
Año de publicación
2025
Idioma
Inglés
ISBN 10 
3031863976
ISBN 13 
9783031863974
Encuadernación
Tapa dura
Número de páginas
264
Contacto del fabricante
Springer Nature Customer Service Center GmbH
ProductSafety@springernature.com

Europaplatz 3,69115 Heidelberg, Germany
Heidelberg
69115
Alemania